Victorinox 91mm Tools Evolution
-
I've put a note on the wiki-page asking for someone to confirm the existence of a mechanical timepiece. Does anyone have more information they can provide?
Perhaps you should ask the person that put that info on the "Timekeeper" wicki page?
According to the history on the page it looks like the user "jazzbass" is the one who put that info down. I believe he uses the same user name on KnifeForums.
Hey - that's me! I put that in and then deleted it. I got that somewhere in vast amounts of internet research, but I now forget where and (more importantly) have been unable to go back and support it with actual info from Victorinox. So forget I wrote that :-[
:ahhh No problem, I have to write notes just to remind myself to write a note! :ahhh Now, what was I saying??

-
@jazzbass said:
Anyway, I'm working on the backspring Phillips article and so far have found only 5 variations:- Square, file, no can-key
- Square, no file, no can-key
- Square, no file, can key
- Round, can-key
- Round, no can-key
What's the 6th one I'm missing?
ICanFixIt found:
- Square, file, no can-key (1)
- Square, file, no can-key (2)
- Square, no file, no can-key
- Square, no file, can-key
- Round, can-key
- Round, no can-key
I am going to post images sent to me by ICanFixIt - I hope he won't mind:
Square, file, no can-key 1 & 2:

Here is a picture contains different pictures I got from ICanFixIt:

ICanFixIt still working and researching and I am thank him so much for helping me out :)
-
i wish they brought back the square philips w/ file
can anyone explain to me why the early corkscrews where grooved not solid or why some philips have the center grooved?
also for us mortals.... whats a can key?
-
@Santos said:
i wish they brought back the square philips w/ filecan anyone explain to me why the early corkscrews where grooved not solid or why some philips have the center grooved?
also for us mortals.... whats a can key?
A can key is the slot in the Phillips that runs through the tip (see Ninaz's pic #3 above). Look closely, you can see the slit running throught the Phillips tip. Many years ago, canned meats (ham, fish, etc.) used a key (and came with the key glued to the top of the can) that you would place on a starter strip surrounding the top of the can. The end of the can key is like a long hole X-amount long where you insert the starter strip. You would turn the key, removing the strip little by little, curling it around the can until the lid is seperated, opening the can of [food]. You loose the can key as it is wound with the now spent strip of metal with no way to remove the key.
The U.S. military used cans similar to store ammunition...aka "spam cans". No longer done.
So, if you lost the can key, you could use your trusty Vic SAK to open it....and reuse the can key on it...as you would just pull the knife away from the strip, freeing it.
-
Here's a pic of the type of meat can it was designed for.

We actually still see some of these in the UK. The key's notorious for getting lost and leaving you with no way to get in. :-\
-
Here's a pic of the type of meat can it was designed for.
...
We actually still see some of these in the UK. The key's notorious for getting lost and leaving you with no way to get in. :-\
Considering what lurks beneath, that's not necessarily a bad thing :D
I can happily go the rest of my life without Spam, but sometimes when the urge gets me nothing else but corned beef will do.

-
Here's a pic of the type of meat can it was designed for.
...
We actually still see some of these in the UK. The key's notorious for getting lost and leaving you with no way to get in. :-\
Considering what lurks beneath, that's not necessarily a bad thing :D
I can happily go the rest of my life without Spam, but sometimes when the urge gets me nothing else but corned beef will do.

eew :( I bet you put Marmite on it as well :ahhh
-
Here's a pic of the type of meat can it was designed for.
...
We actually still see some of these in the UK. The key's notorious for getting lost and leaving you with no way to get in. :-\
Considering what lurks beneath, that's not necessarily a bad thing :D
I can happily go the rest of my life without Spam, but sometimes when the urge gets me nothing else but corned beef will do.

eew :( I bet you put Marmite on it as well :ahhh
I tried that once (I was drunk) not the marvel of modern cookery I was hoping for TBH. :(
-
Here's a pic of the type of meat can it was designed for.
...
We actually still see some of these in the UK. The key's notorious for getting lost and leaving you with no way to get in. :-\
Considering what lurks beneath, that's not necessarily a bad thing :D
I can happily go the rest of my life without Spam, but sometimes when the urge gets me nothing else but corned beef will do.

Ooohhh, me too! But I like Spam as well. Here's me breakfast a couple days ago. Corned beef n eggs!




-
Perfect pics mate.

-
@Ninjaz said:
ICanFixIt found:- Square, file, no can-key (1)
- Square, file, no can-key (2)
- Square, no file, no can-key
- Square, no file, can-key
- Round, can-key
- Round, no can-key
I am going to post images sent to me by ICanFixIt - I hope he won't mind:
Square, file, no can-key 1 & 2:

The asymmetrical tip on #2 is the difference? Huh - I actually have one like that. I saw this, but just chalked it up to either (a) manufacturing tolerances for a part that is machined, not stamped or (b) someone ground down one side for some reason. On mine, the asymmetrical tip is actually the older of the two - maybe ICanFixIt can confirm that this is the case with his as well.
The one with the asymmetrical tip comes from my mid-50s Fisherman. Looking more closely at it, I find I get to add yet another variant to the mix :D:

Note the double grind pattern on the file. On newer ones like my 60s Champion, there is only one grind to the teeth - perpendicular to the body of the Phillips. On this older Phillips, there are two grind to make the teeth, similar to how the pre-1992 metal files were ground. One grind is perpendicular to the Phillips, the second is at about a 60 degree angle. You can see some of the 60 degree grind on the tip of the driver itself.
-
I had one of those with the asymmetrical tips once. It didn't work worth a poop on most the screws I tried it on. :(
-
:ahhh :ahhh so many back spring phillips and I only have two variations :ahhh :ahhh
-
Anyone own a Vic SAK with Multipurpose Hook and fluted/grooved corkscrew ?
if not maybe Scissors with rivet joint and fluted/grooved corkscrew ? -
Anyone own a Vic SAK with Multipurpose Hook and fluted/grooved corkscrew ?
if not maybe Scissors with rivet joint and fluted/grooved corkscrew ?What do I win if I do? :D
Mike comes round and does a "special" dance for you >:D
I have a Champion with hook and fluted corkscrew. Might have other knives but that's the only one that comes to mind.
-
@Ninjaz said:
Anyone own a Vic SAK with Multipurpose Hook and fluted/grooved corkscrew ?
if not maybe Scissors with rivet joint and fluted/grooved corkscrew ?Check out my Tools post on KnifeForums/SOSAK. Under the scissors post, I show my Deluxe Climber with hook, grooved corkscrew and scissors with screw & guide slot.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login