Modders help needed.
-
Well I am trading the CT lite for the regular 34 so we will see if that is any better.
-
@max6166 said:
Most modders save them up when ripping apart other SAKs. I don't know if Rotokid has any for sale.You can always buy a junker Tinker or Spartan from Tim or somewhere else if you were really stuck.
But you are right - the bushings are not readily available like the pins.
You're right, there isn't a source that I'm aware of other than from scrap SAKs or "mod fodder" as Neil calls them. :)
-
I have to admit I don't bother carefully removing bushings. I've been through enough totally beat up SAKs to have accumulated a little supply of spare bushings.
If that's all that's putting anyone off having a go I can soon drop some in a jiffy bag

As with all tasks you may not have tried before the key is just to go really slowly. It may only take someone like scibeer half an hour to put a mod together (or less) but that doesn't mean its wrong for it to take you two days :)
I'd start by taking apart a couple of cheap used knives and then building yourself a small two layer knife. A popular starting point is putting together a SAK with a couple of blades and a wood saw. Not only is it a non-commercially available SAK but it makes for a good woods knife.
As always if anyone needs a couple of beaters (and I mean beaters) to get them started just PM me. I would politely point out that if you're in the USA Tim aka FelineVet always has very cheap used SAKs in stock and offers free shipping ;)
Should you really be blessed with two left thumbs and not feel its something you can do then shoot Bill aka scibeer a line to see if he can put a knife together for you.
Yes I have been know to produce custom SAKs for cash and trades but frankly SAKs and hence parts are expensive over here.... oh and I'm not cheap >:D ;)
-
One of the simplest SAKs you can mod for yourself is a 91mm version of the Gourment.

It's just a case of taking a Spartan and removing the openers. As it's a simple layer removal than you can re-use the pins (they'll still be long enough) and so you don't even need to buy in pin stock. I also rather like it as a pocket knife myself.
-
No saw?smurf, been hanging around Mike too long :P
-
-
:D He's a bad influence ;)
I'm surprised he hasn't persuaded me to make a 74mm saw as yet :D
-
Mike, Lord of Colorful Enunciation! >:( :D
-
Well I think I might give it a go tonight. No promises but I think I will least tear it down, as it seems fairly simple.
-
Remember, slowly 
Good luck

-
Well i got the bushings drilled out and everything is apart, now I'm just waiting for the boy to go to bed so I can work on it some more. I can see a few of the mistakes I made so far, but I think it should still work out, if it doesn't I'll be back on here with pics. Should have it done tonight I suspect, then I will take some pics and post. This is quite fun and SAKs are very interesting when you get them apart...I didn't know exactly how they worked until now. Quite ingenious really.
-
Well first attempt was a failure, I messed up somewhere in the peening. I am going to take everything apart again tomorrow, and use the brass rod from my craftsmen.
-
Like Neil said, slowness is key here. Get it all made up and then take your time peening each pin. I don't know what the others do but I peen each pin so it is still all pretty loose and then go round again nipping them up at the end.
-
Like Neil said, slowness is key here. Get it all made up and then take your time peening each pin. I don't know what the others do but I peen each pin so it is still all pretty loose and then go round again nipping them up at the end.
Good plan

It's not what I do but it sounds like good advice. :)
-
Like Neil said, slowness is key here. Get it all made up and then take your time peening each pin. I don't know what the others do but I peen each pin so it is still all pretty loose and then go round again nipping them up at the end.
Good plan

It's not what I do but it sounds like good advice. :)
Taking your time peening and frequent checking is key...oh, and not wearing trousers

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


