Best MultiTool oil?
-
@turnsouth said:
I know that the smell of WD-40 will dissipate after a few hours. But for those who use 3-in-1, does the smell go away? It's been a long time since I used 3-in-1.In my experience, yes.
-
I used to use mineral oil. but the pivots/hinges got all gummy

-
Synthetic motor oil also works good if you change you vehicles oil your self hold a little back for your oil bottle. For cleaning and rust protection i use W-W40. For cleaning i hose said tool W-D40 clean with pipe cleaners,tooth picks and Q-Tips. Then flush with W-D40 and then i finish up by removing the excess W-D40 with a air nasal or a can of compressed air. If you W-D40 is left in a thick layer it turns gummy but left thin it protects well and leaves a nice finish. In all the rust protection tests i have seen and done myself W-D40 fared well products like motor oil, Hopes gun oil, Breakfree, and Rem oil did not work well.
-
@shamus said:
Edged tools simply don't need oils/lubes like Breakfree or Remoil.I suppose that depends what you're intending to accomplish with the oil/lube. Breakfree will penetrate and remove rust, where mineral oil will only inhibit rust.
We're not just discussing just "edged" tools here, but multitools. I've purchased used multi-tools that certainly needed Breakfree.
-
I have been using an oil called "Inox" which is a food safe light oil that I bought from CentralValley on eBay. Seems to work very well.
-
There isn't a best really it's down to what you use
if A works better that B fine! any of them will add a corrosion protection barrier 
remember though we are talking maintenance here ,where after cleaning we lightly lube/oil knives,yes as someone said earlier lubes are not needed maybe not
but after using my knives or tools in damp climates oil or lubes become essential to keeping the tools rust free,if your in doubt try it out in salt water without drying and oiling RUST!!! :ahhh again of course that statement is very much suited to carbon steel as this has least corrosion abilities than say D2 steel
:D -
Any specific brand? I've been using WD-40 on and off for the past couple of years. I've been trying to find some mineral oil around here but every shop keeper that hears those words goes "duh?"... ::) I guess it's a "lost in translation" case, so a brand name would surely help...
-
Any specific brand? I've been using WD-40 on and off for the past couple of years. I've been trying to find some mineral oil around here but every shop keeper that hears those words goes "duh?"...
Any brand of Mineral Oil would be fine. Mineral Oil can be found in any pharmacy section of a store… under laxatives. Seriously.. it’s an old time laxative.
-
@John said:
There isn't a best really it's down to what you use
if A works better that B fine! any of them will add a corrosion protection barrier 
remember though we are talking maintenance here ,where after cleaning we lightly lube/oil knives,yes as someone said earlier lubes are not needed maybe not
but after using my knives or tools in damp climates oil or lubes become essential to keeping the tools rust free,if your in doubt try it out in salt water without drying and oiling RUST!!! :ahhh again of course that statement is very much suited to carbon steel as this has least corrosion abilities than say D2 steel
:DAfter medal is exposed to salt water yes it needs to oiled but frist the salt needs to be washed away with water or a water based cleaner. I am a avid shooter i shoot surplus corrosive ammo and black powder weekly. Beleave it or not salt deposits left under oil can start rust. Ask me how i know.
I've heard that mineral oil is good.
Any specific brand? I've been using WD-40 on and off for the past couple of years. I've been trying to find some mineral oil around here but every shop keeper that hears those words goes "duh?"... ::) I guess it's a "lost in translation" case, so a brand name would surely help...
Here in the states they sell mineral oil in the drug area of stores.
-
Yeah, I know... However, everytime I enter a pharmacy and ask for mineral oil they redirect me to the nearest gas station, as the translation is the exact same phrase used for motor oil... ::)
-
There isn't a best really it's down to what you use
if A works better that B fine! any of them will add a corrosion protection barrier 
remember though we are talking maintenance here ,where after cleaning we lightly lube/oil knives,yes as someone said earlier lubes are not needed maybe not
but after using my knives or tools in damp climates oil or lubes become essential to keeping the tools rust free,if your in doubt try it out in salt water without drying and oiling RUST!!! :ahhh again of course that statement is very much suited to carbon steel as this has least corrosion abilities than say D2 steel
:DAfter medal is exposed to salt water yes it needs to oiled but frist the salt needs to be washed away
Any specific brand? I've been using WD-40 on and off for the past couple of years. I've been trying to find some mineral oil around here but every shop keeper that hears those words goes "duh?"... ::) I guess it's a "lost in translation" case, so a brand name would surely help...
[/quote]Here in the states they sell mineral oil in the drug area of stores.
[/quote]

{what happened here? lol sometimes I quote someone and often I get quoted for weeks}] :ahhh
Baby oil is in fact scented mineral oil
and yes any oil is available here in the UK,we don't mind peeps slipping up once in awhile it seems :POh BTW on to medals hmmm your right don't subject these to salt water,tools are ok tho ;) :D
-
Yes the small of 3-in-1 eventually goes away.
But I have noticed that it takes a long time, which means 1 of 3 things.
- Either I get used to the smell.
- It stops smelling because it wears out and the knife needs more oil.
- Or 3, the smell actually wears off.
It works well for me though.
I even rub it on some the blades of the knives that I use for work because its a salty, wet environment and it helps keep the knives from rusting.
-
@Nikos said:
Yeah, I know... However, everytime I enter a pharmacy and ask for mineral oil they redirect me to the nearest gas station, as the translation is the exact same phrase used for motor oil... ::)More specifically, I usually see the unscented mineral oil labeled as "infant laxative" in my area.
Has anyone ever seen the machine they use on the babies to squeeze out the baby oil? I just wonder how safe it is. :D
-
Yeah, I know... However, everytime I enter a pharmacy and ask for mineral oil they redirect me to the nearest gas station, as the translation is the exact same phrase used for motor oil... ::)
More specifically, I usually see the unscented mineral oil labeled as "infant laxative" in my area.
Has anyone ever seen the machine they use on the babies to squeeze out the baby oil? I just wonder how safe it is. :D
Baby oil(which BTW is mineral oil scented) is fine tho it's scented and smells of Sh** IMO
but it's fine for knives and tools
:one point tho! don't use veg oil :ahhh :ahhh :ahhh :D
-
I've recently started using CRK's grease and although it is ridiculously overpriced, it is great stuff.
-
+1 on RemOil.
Use it on my folding knives too.
My Leathermans need regular oilings more to keep from rusting. ::)
-
Another vote for Remoil , I use it on all my multi's and SAK's .
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
