Freestyle love
-
I like the look of them just really wish they had kept the bit driver in it :'( Saying that I love the clip if it is the same as the Skeletool and will probably have 1 sometime in the future :D
-
@Poncho65 said:
I like the look of them just really wish they had kept the bit driver in it :'( Saying that I love the clip if it is the same as the Skeletool and will probably have 1 sometime in the future :DYeah, a bit driver would make it better.
I'd be tempted to mod it to replace the knife with a file and make it legal UK EDC - or replace the knife with scissors.
-
The one that you looked at that was so tight was probably just really new.
My Skeletool was very tight when it was new. That was something that really got me discouraged about it and was ultimately one of the reasons that I traded it off.
I am kind of kicking myself for not giving it more of a chance. It loosened up a lot before I got rid of it. But my thoughts about the quality of the tools kind of changed a lot.
-
How does its blade stack up/compare to the LM c301? I don't EDC my c301, but it's typically my go to blade when I'm at home...easy to open, easier to find that the SAK that's always in my bag, and cuts like a dream. Would a Freestyle be as good a replacement blade for that as say the Buck X-Tract? The Freestyle pliers look a bit nicer, sturdier, and deployable than the X-Tract's.
-
@turbov21 said:
How does its blade stack up/compare to the LM c301? I don't EDC my c301, but it's typically my go to blade when I'm at home...easy to open, easier to find that the SAK that's always in my bag, and cuts like a dream. Would a Freestyle be as good a replacement blade for that as say the Buck X-Tract? The Freestyle pliers look a bit nicer, sturdier, and deployable than the X-Tract's.I have a Buck X-Tract 730 and I also have both a Freestyle and a Freestyle CX. The X-Tract pliers aren't even in the same league as the Freestyle's. The X-Tract blade is larger but if you get the Freestyle CX it's blade is 154CM, but a plain edge not a combo edge like the X-Tract and not as large as the X-Tract. The X-Tract has the straight and phillips drivers on it too, the Freestyle doesn't have any drivers. I like the Freestyle much better but wish Leatherman had added a bit driver to it.
-
How does its blade stack up/compare to the LM c301? I don't EDC my c301, but it's typically my go to blade when I'm at home...easy to open, easier to find that the SAK that's always in my bag, and cuts like a dream. Would a Freestyle be as good a replacement blade for that as say the Buck X-Tract? The Freestyle pliers look a bit nicer, sturdier, and deployable than the X-Tract's.
I have a Buck X-Tract 730 and I also have both a Freestyle and a Freestyle CX. The X-Tract pliers aren't even in the same league as the Freestyle's. The X-Tract blade is larger but if you get the Freestyle CX it's blade is 154CM, but a plain edge not a combo edge like the X-Tract and not as large as the X-Tract. The X-Tract has the straight and phillips drivers on it too, the Freestyle doesn't have any drivers. I like the Freestyle much better but wish Leatherman had added a bit driver to it.
Thanks! I keep eying the Freestyle, even more so than the Skeletool, but can't bring myself to get it while I have the c301. That said, if anything ever happens to it, the Freestyle sounds like what I'd want to replace it. Thanks!
-
Don't rule out the X-tract. The pliers aren't actually as bad as the people make out, and if you want drivers and everything OHable the X-tract is the way to go. Sure it doesn't have the fancy steel of the Freestyle, but it has Buck's 420HC which is a fantastic steel.
-
The X-Tracts's pliers aren't in the same league as ther Freestyle though - I agree with 1jump2many
Having said that, I would say they are much better than SAK pliers though, so I'd probably consider them to a medium option.
Great tool overall though the X-Tract - best blade I've got on any multitool.
-
How does its blade stack up/compare to the LM c301? I don't EDC my c301, but it's typically my go to blade when I'm at home...easy to open, easier to find that the SAK that's always in my bag, and cuts like a dream. Would a Freestyle be as good a replacement blade for that as say the Buck X-Tract? The Freestyle pliers look a bit nicer, sturdier, and deployable than the X-Tract's.
I have a Buck X-Tract 730 and I also have both a Freestyle and a Freestyle CX. The X-Tract pliers aren't even in the same league as the Freestyle's. The X-Tract blade is larger but if you get the Freestyle CX it's blade is 154CM, but a plain edge not a combo edge like the X-Tract and not as large as the X-Tract. The X-Tract has the straight and phillips drivers on it too, the Freestyle doesn't have any drivers. I like the Freestyle much better but wish Leatherman had added a bit driver to it.
Then you would have a Skeletool.
-
How does its blade stack up/compare to the LM c301? I don't EDC my c301, but it's typically my go to blade when I'm at home...easy to open, easier to find that the SAK that's always in my bag, and cuts like a dream. Would a Freestyle be as good a replacement blade for that as say the Buck X-Tract? The Freestyle pliers look a bit nicer, sturdier, and deployable than the X-Tract's.
I have a Buck X-Tract 730 and I also have both a Freestyle and a Freestyle CX. The X-Tract pliers aren't even in the same league as the Freestyle's. The X-Tract blade is larger but if you get the Freestyle CX it's blade is 154CM, but a plain edge not a combo edge like the X-Tract and not as large as the X-Tract. The X-Tract has the straight and phillips drivers on it too, the Freestyle doesn't have any drivers. I like the Freestyle much better but wish Leatherman had added a bit driver to it.
Then you would have a Skeletool.
Nah, the Skeletool still has the lanyard/bottle opener which makes it a Full-Size too and not a Pocket Tool. I've never liked the lanyard/bottle opener. If you have that much metal in your hand and you can't open a bottle........... I can open a bottle with a Bic lighter. Leatherman needs to put a bit driver on a Freestyle and phase out the Skeletool.
-
Many like the carabiner as a form of carry though, it is more than just a bottle opener (and a good one at that if I remember correctly). I can't see LM phasing them out.
-
@Benner said:
Many like the carabiner as a form of carry though, it is more than just a bottle opener (and a good one at that if I remember correctly). I can't see LM phasing them out.I don't actually see Leatherman phase it out either, but I think putting a bit driver on a Freestyle would make it a more popular tool. Just my opinion, but I think it would probably be more popular than than either Skeletool or the current Freestyle. It would have the essential tools the average person uses on a daily basis in a Pocket Size tool.
-
I've been pocketing my Freestyle to work the last couple of weeks. Only one day did i wish i carried the Wave. I needed a #2 phillips.
They make it in regular blade don't they? Not the half serrated? -
They do Pacu, but it's the Premium priced CX that has the PE these days.
-
looks like i might have to pick that up...or try a Skeletool with straight edge
-
Here's a good thing to carry if you want a Freestyle
-
@Pacu said:
I've been pocketing my Freestyle to work the last couple of weeks. Only one day did i wish i carried the Wave. I needed a #2 phillips.
They make it in regular blade don't they? Not the half serrated?Yes, the CX version is plain edge. That is also the reason the newer Skeletool blades are changing. The new production Skeletool CX will have the same blade as the Freestyle CX, 154CM plain edge. The standard Freestyle and new production standard Skeletool will both have the 420HC combo edge blade. I have mentioned this on other threads and I hate to beat a dead horse but if Leatherman had put a bit driver on the Freestyle it would be the perfect "pocket" tool, for me. Hence the word "Pocket". Not a Full-sized tool. I've contemplated moding a Skeletool and have seen some pretty decent jobs but the bit driver, even without a bit in, it extends just a tad too far out. If Leatherman did add a bit driver to the Freestyle it would be nice if they recessed it a quarter of an inch, maybe an 1/8. Also put the spare bit slot in it like the Skeletool has so when you have it in your pocket as an EDC MT you can pull it out and put the bit in. It might be a big uncomfortable carrying it around as a pocket tool with a bit poking out. :ahhh
-
@1jump2many said:
I have mentioned this on other threads and I hate to beat a dead horse but if Leatherman had put a bit driver on the Freestyle it would be the perfect "pocket" tool, for me.Once or twice :D
-
I have mentioned this on other threads and I hate to beat a dead horse but if Leatherman had put a bit driver on the Freestyle it would be the perfect "pocket" tool, for me.
Once or twice :D

I'd buy that for a dollar!!
Yea i went Robocop on you....that just happened :o :D
-
I have mentioned this on other threads and I hate to beat a dead horse but if Leatherman had put a bit driver on the Freestyle it would be the perfect "pocket" tool, for me.
Once or twice :D
I'm hoping the squeaky wheel gets the grease.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login