older powerlock
-
Nice pics and thoughts TangoDown.
There are two grievances I have with the PPP, Powerplier, Powerlock and Power assist:
- The fact that I do not have an ape's hands:
The bolt in the pliers is about 0.5" (it's a metric size and I don't have a metric ruler within easy reach), and the Powerlock at this point is very difficult for me to use. At 5.5" from handle to handle, the compound leverage adds limited benefits as my hands aren't big enough to get a good enough grip to apply much force anyway!

Contrast that with a non-compound leverage tool. I can easily apply grip to handles that are 3.5" apart. This is actually much more beneficial to me, than not being able to apply the compound leverage!

- Using the drivers:
In addition to the already mentioned inevitable pain you'll get trying to apply pressure to a worn screw head for example, there's one very useful feature that a "normal" butterfly opening tool can offer, that the geared SOGs can't.

This is a real shame actually, as the drivers (specifically the Phillips) themselves are excellent, grippy and strong.
Therefore, it's only the SOGs without the gears that I can get on with at all.
Left = Bad. Right = Good :D

-
Sorry to hear about your issue with the old powerlock, I love mine. I just recently upgraded to the powerassist after carrying the old PL for 5 years. The only issue I had was the combo blade, which I changed to a PE knife and switched out the saw for the serrated sheepsfoot blade. I never had a problem with the exposed gears because I wear gloves when I work. When I am not wearing a glove I just put a folded hankerchief over the end. As far as tool clumping goes I kind of like it. It makes it easier to get at the tools when I am wearing gloves. That being said I am really enjoying my new PA. The redesigned pliers and wire cutter is outstanding and the AO knives are fun to play with.
-
@DaveK said:
Nice pics and thoughts TangoDown.There are two grievances I have with the PPP, Powerplier, Powerlock and Power assist:
- The fact that I do not have an ape's hands:
The bolt in the pliers is about 0.5" (it's a metric size and I don't have a metric ruler within easy reach), and the Powerlock at this point is very difficult for me to use. At 5.5" from handle to handle, the compound leverage adds limited benefits as my hands aren't big enough to get a good enough grip to apply much force anyway!
Contrast that with a non-compound leverage tool. I can easily apply grip to handles that are 3.5" apart. This is actually much more beneficial to me, than not being able to apply the compound leverage!
- Using the drivers:
In addition to the already mentioned inevitable pain you'll get trying to apply pressure to a worn screw head for example, there's one very useful feature that a "normal" butterfly opening tool can offer, that the geared SOGs can't.
This is a real shame actually, as the drivers (specifically the Phillips) themselves are excellent, grippy and strong.
Therefore, it's only the SOGs without the gears that I can get on with at all.
Left = Bad. Right = Good :D
That is definitely my only gripe with the Powerlocks. I do have large hands but it does make it tricky to use when whatever is in the jaws is fairly large and I have to adjust my technique. When the grip gets wide, it helps to have the compound leverage to compensate the stretched grip. For most of my use, Powerlocks are great. If the nuts-n-bolts get too big, I tend to use the correct tool for the job anyways and get out the socket set or wrenches. Same with my other non-SOG (Powerlock) multi-tools.
-
good point. i think if you have to push so hard that the gears are hurting your hands, you should use a proper screwdriver. i love my multis as much as the next guy, but they really aren't meant to drive screws into wood, especially without a proper pilot hole(which isn't a good idea anyway, as splitting the wood is more likely without a pilot hole.).
-
They did in your hands whatever the screw. It's a poor design IMO to have jaggedy bits right where you are applying pressure.
-
@Paracord Junky said:
good point. i think if you have to push so hard that the gears are hurting your hands, you should use a proper screwdriver. i love my multis as much as the next guy, but they really aren't meant to drive screws into wood, especially without a proper pilot hole(which isn't a good idea anyway, as splitting the wood is more likely without a pilot hole.).Whilst what you say is fair, I expect drivers on my multis to perform every bit as well as a dedicated driver! Fortunately, I have a couple to choose from, and the SOGs stay in the drawer ;)
-
+1 for me as well Dave on the problem of having too have LARGE hands to comfortably use the Large Compound Leverage SOG's :( + I like the ability to modify my MT's handle position when using the driver tools , the gear mechanism on SOG's make this almost impossible. :(.
I would like SOG to experiment with a non compound leverage MT , besides the Paratool :D :D. I do not think it is going to happen though :(
-
i'd like to see a locking paratool

but seriusly i love my powerlock, i dont have bid hands but then again i use pliers for pliery things.
The compound grip has been so handy when i want to say grind a fiddly little Sak spaceIf it comes to undoing a nut i just use the appropriate spanner (or the adjustable wrench that goes with the multi :D)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login