Show your slip joint's thread!
-
Very nice

-
Here's a few more I finally got some pics take of. I've had these for a few wekks now, real good quality on these............


These are Diamondback Stockmans from Buck Creek. Made in Solingen, Germany and are 4 1/4" closed. This is a brand that is kind of under the radar but has been around for quite a while. The quality on them is excellent.
The first one is in Deer Stag and a special edition run done with dual shields. It has both the "Buck Creek" and "Buffalo Creek" shields and tang stamps. I had never heard of "Buffalo Creek" until I saw this one so I am assuming it's another "brand" under the Buck Creek name. The other is standard Buck Creek Diamondback done in smooth Buffalo Horn.

As mentioned they are both 4 1/4" closed and sport squared bolsters. Blades are 440A stainless steel, bolsters and shields are nickle/silver, pins and liners are brass. The fit and finish on these is very good. Both knives have clean blade grinds with evenly ground edges that are very sharp, all of the blades are mirror polished and are sans any blade play. Bolsters are mirror polished as well but are nicely contoured around their edges making them less pronounced than most other square bolstered stockmans. The backsprings on both knives are fairly stout with good snap to them, but not nailbreakers. The whole backspring area on both have a nice brush polished finish. Fit all around on both is virtually seamless. All parts are fitted very well, and even the Stag version with it's thick handle slabs fit up smoothly to the bolsters as they are tapered down to them and polished smooth here.

The only fault I can really find on any of them is on the Buffalo Horn version. When the mainblade is opened fully the backspring doesn't rest flush to the back of the knife. The backspring rests here slightly below the rest as you can kind of see in the pic above. Nothing major, and it does rest flush and seamless when the mainblade is closed.....just some nit-picking on my part.
All and all these are excellent Large Stockmans and given their sub-$50.00 price tags are great buys for anyone looking for a well made large framed 3-blade slipjoint.
They get my
approval! :D2xTap
-
Cool! I recognize 2xTap from other forums! Nice to see you and your knives 2xTap!

Traditional slipjoints are a favorite of mine. I used to have many but I ended up pairing them down to five with these three part of my core EDC rotation.
In order of appearance, a Case XX 6332 reverse gunstock stockman (1940-1964), a Case XX USA 6318 HE stockman (1965-1969), and a Queen City Cutlery SFO amber worm groove canoe in 1095 carbon steel.



-
Beautiful knives there mate

-
texasflyfisher,
I remember that Case XX Stockman, haven't seen you in a while bud. Great pics as always.

2xTap
-
Some more eye-candy here, my latest Case Classic addition that arrived a couple of days ago......


This one another #40 pattern Jumbo Stockman at 4 3/8" closed built by Queen for the Case Classic Series done back in the 90's. This one is of 1996 production with jigged Brown Bone scales and the XX blade etch, and came mint unused with the factory box and all the associated paperwork.........

Build quality and F&F is pretty much flawless. Blades are mirror polished 1095 with clean grinds and swedges and hair-popping edges. Bolsters and shield are polished nickle/silver with brass liners and pins. The carbon steel backsprings are brushed finished and quite stout, all blades have real good snap to them. Can't find a gap anywhere on this thing and all blades are sans any lateral play.....it's rock solid in build.


I still kick myself for not getting into these earlier when prices were a bit more reasonable. I'm having a hard time finding these now for under $100, and even this one was a slight fight in bidding but managed to pull it for $101.00 but lost out on a second one in another run that went up to $120.00!
But I got a few more of these in my sights and hoping to get lucky on some.
2xTap
-
Oh my!!
Those are beautiful! Wow! I love this thread! -
Beautiful Stockman 2xTap. The coloring on the scales really goes well with the mirror polished blades. If you ever decide that you don't want to own that knife anymore please let me know.
-
That is gorgeous

-
That is a particularly nice stockman 2xTap!

I like the rounded bolsters on it. Most large Case stockman have the square bolsters. The rounded ones just seem more comfortable in the pocket. However, at 4 3/8" I am not sure how pocketable this stockman would be.
The long pull, 1095 steel and bone are great! The sheepsfoot blade looks more like a coping blade due to the sharper tip. Still very useful, IMO.
Another great choice!
-
GMArthur,
This particular pattern of Stockman from the Case Classic series is still widely available so if you are interested in one they aren't hard to find. Also, Queen built these in the older Winchester line, you can find these from time to time too. And, Queen is currently building this pattern for the MooreMaker brand of knives with a slightly different mainblade. Here's a Mooremaker #40 pattern in yellow smooth bone.......

......they do several different handle materials in these, and they run from about $90.00 to $120.00 or so.
TFF,
Thanks bud! While I prefer square bolstered Stockman's I think this pattern is just right with the rounded bolsters. And as long as you have big pockets this pattern will be quite pocketable! :D
2xTap
-
The price of this almost made me choke, but my my my it sure is pretty. Flash, my green buddy, you might like this.
Case Pocket Worn Bermuda Green Mint Set
-
GraysonK,
It is a nice set but these do get pricey. But in truth the price is not too bad considering each of these knives by themselves (of the Mint Set variety) would go for about a $100 a piece if sold separately, a bit more for the larger patterns.
2xTap
-
It is a nice set but these do get pricey. But in truth the price is not too bad considering each of these knives by themselves (of the Mint Set variety) would go for about a $100 a piece if sold separately, a bit more for the larger patterns.
2xTap
I know. :) Just seeing it all together like that was overwhelming. I love the bermuda green bone, my little stockman is my pride and joy right now. I'd love using it, showing it off, or just sitting there looking at it. I'd like to get a couple more of them and I figure I will eventually. You are such a great resource for the slipjoint stuff. I love reading your posts and drooling over the pics. Thanks, 2xTap.
-
Glad you enjoy my posts and pics, and that they help. I always enjoy getting people interested in the traditional patterns. More eye-candy to come........I just received the two Case large stockmans I ordered and I got a sweet Schatt & Morgan on the way. Just waiting for the weather to break here so I can get some pics taken.
If you like the Bermuda Green, as well as the fancy bolsters of the Mint Set runs......Case has fairly recently released a new laser etched series in Bermuda Green called Bermuda Green Ivy. They are actually priced a bit closer to regular production runs but are fancy bolstered like the Mint Sets. Here's a pic of the Trapper in the series........

You can find the rest of them here: http://www.soonerstateknives.com/casebermudagreenivyknives.htm
2xTap
-
@GraysonK said:
The price of this almost made me choke, but my my my it sure is pretty. Flash, my green buddy, you might like this.Case Pocket Worn Bermuda Green Mint Set
For some reason, that little green Mini Copperlock has always appealed to me over any other color.
So far I haven't bought one, but every time I look at a pic of one my resolve weakens.
Something about the shape of the blade appeals to me - looks like a perfect gentleman's knife. Of course since I'm not a gentleman, I have no real need of a gentleman's knife. ;>
.
-
Got some pics ready of my Case Brothers Sowbelly in red bone. I have owned knives from just about every major knife manufacturer and I have to say that this knife probably has the best fit and finish of any production knife I've handled. I can't find a single flaw on this knife at all. If I had to nit pick something I could say that the "talk" on the spey blade is not as snappy as on the other two blades, but that is being really really picky.
Here is a shot of the knife all closed up. I think the Sowbelly pattern is very comfortable to use. It seems to fill my hand nicely. The hump or "belly" does really add a lot to the stockman pattern.

Here is a couple of shots of the main clip blade. Blades are all ground nicely with no rub at all. The edge bevels are also very well done, being very acute and sharp.


The blade stock is a bit thicker than most of my other stockman style knives. Making the backsprings and overall thickness a bit more as well. All the liners and springs are flush.

This is my first "Case Brothers" stamped knife and I can't say enough how impressed I am with the quality of it. Total thumbs up on this one.

-
Case makes some really nice sowbelly stockman knives. They are stout like you said and feel quite good in the hand. Schatt & Morgan also makes a fine sowbelly stockman though theirs is just a tiny bit smaller but still excellent. Congrats!

-
Case knives are certainly growing on me, especially that new green one above - what a beauty

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


