Need some experienced advice
-
@Styerman said:
Two possabilities spring to mind , a Leatherman Crunch , and a Victorinox Swisstool or Spirit ( preferably a plus package ) combined with a Leatherman Universal Tool Adapter . An Old Skool Wave with a Universal Tool Adapter is also a great candidate . I have used all of the above lots and can vouch for them .Pics of my bit set up !
A Leatherman Supertool 300 might serve you well . Lots of great choices , not an easy descision !
Chris
-
@maintmanmike said:
The reviewes for the LM did not seem all that great, any info would be Greatly appreciated!! Thanks!!Have a second look at LM tools,bro. The Surge, ST 300 or Core might be the right tool for you!
Welcome to the forum Maintmamike!
-
Thanks for all the replies, seems like I have a decision to make! I do have another question, of the LM are they all pretty much created equal, durabiltiy wise? I have looked at the LM Charge and Wave at Tyler Tool. The Charege claims to have stronger pliers and made of a better grade of stainless. Any truth to this or is it pretty much a choice of accessories. Once again THANKS, I was NOT EXPECTING such great advice on short notice!! If I would have known I would of gotten back to this sooner!!!
-
The new Wave and the Charge series all have the same plier heads I belive, although some Charges have a cap crinper in the head also.
The differences in steel are probably references to the main knife blade...the Wave is a basic steel, but some of the Charges have S30V or 154CM. There's nothing wrong with the plain old stainless steel of the Wave IMO..
BTW when you read "new Wave" it refers to the Wave model that came out in 2004 that has locking impliments. The "old Wave" was slightly smaller and thinner and none of the inner tools locked.
Check and see if there are pocket clips available at that store also, both the Charges and the new Wave can be fitted with one and lots of people like carrying it that way.
-
@maintmanmike said:
Thanks for all the replies, seems like I have a decision to make! I do have another question, of the LM are they all pretty much created equal, durabiltiy wise? I have looked at the LM Charge and Wave at Tyler Tool. The Charege claims to have stronger pliers and made of a better grade of stainless. Any truth to this or is it pretty much a choice of accessories. Once again THANKS, I was NOT EXPECTING such great advice on short notice!! If I would have known I would of gotten back to this sooner!!!That claim I believe dates back to when the first Charges were released, and at the time it was true. Since then, LM have pretty much fitted their new range out with the stronger pliers design, so that shouldn't be a deciding factor for you amongst the 4" tools.
However, if strength is what you want, LM do make bigger, stronger tools like the Core and the Supertool 300, but if you want the interchangeable bits, then maybe the Surge is where you should be looking. The Surge is basically a big Wave (clever naming huh?) with a T-Shank adapter which could be useful in your line of work.
Here's some pics:


-
Oh - I should have added that I carry a Charge every day, and it has never failed me in any way!
-
If you can stand the weight I would recommend the Surge. The Wave is good the Charge is good however I would go by way of the Surge. You could look at a few of the sponsor sites here or jump to EDCsource.com or lastly Ebay for one at fairly good price.
-
OK, again I guess I can NOT say how MUCH I appreciate all the input and response I have recieved!! You guys really do know your stuff, you have also made me realize just what subdtle differences there are in these tools, that I have not noticed before!! Anyhow, I believe I have come to a conclusion!!! After looking at the recommended Surge and Charge, I am going to give the Charge ALX a try. The 1 thing that I finnaly noticed was that the Charge was the only Pliers that where not just Needle nose. They have the indent as "pliers" which will be needed in grabing that bolt or nut when that second set of channel locks is 3 floors down and out in the truck!! Also I liked the "gut" hook feature, might come in handy tring to grab that erant wire from the back of the box (power better be off, using an ALL METAL tool!!!) Again THANKS to ALL!!! I WILL CONTINUE to visit this site, and I have already let a few of the guys know about it. I will post some updates after I get this Charge and the bit set from LM to let ALL know how its going to stand up in this new job.
-
Just remember the gut hood is sharpened inside so don't pull to hard on any wires that you are trying to snag!
Good luck with the Charge! It's a great tol and I doubt you will be disappointed! :D
Def
-
Welcome to the forums Maintmanmike,it sounds like you make a good choice on the ALX,I was in Aircraft maint. for over 30yrs.
& 
-
Welcome mike, hope the Charge works out well for you - I love mine :D
Come back and see us soon and bring
beerfriends
-
Welcome dude. Personally... I would have said Surge... but we all know I would say Surge. Big tool

-
Welcome to MTO mike
Good choice with the Charge. I'm EDCing an XTi currently and I'm loving it. I previously EDCed a Swisstool Spirit which was also fantastic. Hope you get on with your new MT (and post lots of pics :D).Rich.
-
Welcome!

you will not go wrong with Leathermans, they make so many types and sizes you'll find what you want.
and they make em good.but I would recommend to you the SOG powerpliers, the strongest pliers in the MT business (compound leverage)
and it comes with a 1/4 adopter for anything you can fit in it.plus you can switch out the tools "yourself" easily (made to do that, none of the rest do that) so you can
customize it the way you want.whatever you get, let us know and give us your views. good luck ;)
(and if you hang around here you'll get em all! :P )
-
You'll enjoy the charge , an welcome !
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






