Storage issues solved.
-
2XTap, you can't go wrong for that price.
getpower, curio cabinets have limited floor space with plenty of dead space in regards to height. They are designed for taller objects. With that said though, they do look good full of sharp pointy things.

-
@Chako said:
So there you have it. I know this will be the last storage unit I will need. It should take me quite a while to fill this bad boy out.Don't mean to be the bringer of bad news, but at the rate your mt/knife collection is expanding I also see a collection of Craftsman containers in your future... :P :D
-
Seems like some of you need this...you know..to hold your Argentum Leathermans :D


-
Hey fellas, can I borrow a knife? :D
-
I finally got around to taking some photographs of what I have stored in my Craftsman unit.
Top chest (SAK storage)
The very top is empty other than for temporary box storage on a recent order. I also have some instructions up there. It is a nice place to store them.

One of the 1/3 top drawers which contains some odds and ends along with the Vic 108s.

The center deep drawer. Perfect for the Battle series knives along with Zodiac series knives.

The main storage drawer for the Wenger collection.

Followed by the main storage drawer for the Victorinox collection. I have this one rather full, so I am expanding in the upper smaller drawers.

The lowest chest drawer is deep and perfect to store my special collector and boxed knives. I have a mix of Wenger and Victorinox in here.

Bottom Cabinet (MT storage)
Top half drawers are full of misc items. Placeholders for more important items down the road.

Next two half drawers contain my utility knife collection as well as part of my Leatherman collection.

Main Leatherman collection drawer.

The next two drawers contain my misc MT collection.


The next drawer contains the newly acquired Pre-80s Victorinox Display Case. Not sure exactly where I am going to put this, but it is safe and sound in here for now.

The next drawer is deeper and is perfect for some MT misc stuff.

I have been eyeing the larger deeper drawer for my sheath storage. Right now, I have them stored elsewhere.
Well there you have it. That concludes a quick tour of the Craftsman. I still have plenty of room for expansion.
-
Chako.....thats a bit pathetic isn't it?
(Not that I am HUGELY jealous or anything :P)
Looks reeeeeeeally nice....well done

-
Looks great Chako, absolutely top notch.

-
Thanks. :)
-
Looks good.. That Craftsman is great..

-
My nightstand drawer was getting over crowded so I came up with this:
Top Drawer: Boxes, various sharpeners, takedown tools, parts.

Next Drawer: SAKS, SAK parts, small lockbacks.

Next Drawer: Multi's with sheaths, RAT-3.

Last Drawer: Tactical knives and Flashlights.

Its getting crowded, but it is a lot more organized.
-
That looks good Zack.

-
I've downsized quite a bit, but everything gets used in this set up, just waiting on my Manix 2 from GG.
-
The sheath is ok, big problem evidently with the Ontario Rats. The RC Rats supposedly have a better sheath, but for what I am going to use it for it will be fine. I just need to find a drop leg rig for it and I will like it a lot more.
-
That looks good Zack.

Yes it does, granted, so does yours, Chako.
How're you liking the RC3, Zack? It felt nice in the hand, but the sheath, to me, left a bit to be desired. Still, it's quite a nice green. :)
Chako, your set up is what inspired mine. I had a bunch of hand tools in mine that I never used. I chucked them in a bag for the time being, I like this a lot better. Plus, I can lock it so the little one can't get in it, and the wife is happy that my nightstand doesn't look like a disaster.
-
Keeping the wife happy is probably the most important thing in this whole endeavor...that and keeping them away from little prying hands. ;)
-
Something like the one you got I have been looking into myself. Though I'm trying to do it on the cheap and in something other than red. Not having much luck at the moment.
Currently part of my Knife/SAK/MT collection rests in a couple of these I have.......

........but the two I own are full. I need me something like that Craftsman.
2xTap
2xTap,
Are those Camper knives in the top right drawer? Are they Case? One looks like it might be a Camillus. I have a few Case Camper knives and a couple Camillus myself. Great knives, of course Case is better and more collectible, but I have a soft spot for Camillus.
-
Something like the one you got I have been looking into myself. Though I'm trying to do it on the cheap and in something other than red. Not having much luck at the moment.
Currently part of my Knife/SAK/MT collection rests in a couple of these I have.......


........but the two I own are full. I need me something like that Craftsman.
2xTap
When you upgrade your storage, I will gladly buy one of those chests from you! Let me know the price so i can start saving!
-
Since this is a continuation of the story, I have decided to resurrect this old thread.
Well, looks like my storage issues continue. I guess I knew this day would come, but this time, I am in a bit of a quandary. I have somehow filled the Sears Craftsman storage chest and cabinet. Now I am in need of some expansion room.
Here is the problem drawer by drawer…
The top expansion drawer with lid is now full. In fact, I have several layers, with MTs on the bottom, and larger items that I do not wish to separate from the sheaths on top. So much so that this space has become unusable and rather messy.

Now here we have the next 3 drawers. The middle one is very deep and holds the Victorinox Battle series and the set of Astrology Classics. I do have a bit of room to put something else in here. The left drawer contains mostly cheap MTs. I am now forced to place a double layer in here as seen by that single MT atop the others. The right most drawer holds my ever expanding Bear & Son collection. At first, when I designated this drawer to hold the Bear & Son items, I had only assigned half the drawer. Getting so many has exceeded my expectations, and almost the allotted space. However, if I take any more in, I do not have much expansion room.

The next drawer was assigned to keychain multi-tools. However, half is now occupied by Seber (I got the name right!) and Swiss+Tech gear. Much of the expansion room went into filling that bottom layer of the top tray.

Next we have the Victorinox and Buck drawer. As you can see, I don’t have any room for anything else. I think I have all the Victorinox models I want, but there are still a few Buck X-Tracts that I will want in the future.

This drawer is packed with IDWorks and miscellaneous locking pliers.

Now, when I first got into collecting, I figured I would be done with just 4 SOG models. Little did I know there was so much more? So I designated a very small section to the SOG family. Well, that collection has outgrown the small drawer, let alone the original 4 slots. I had double layering, and that back section bugs me something fierce.

The Leatherman stuff keeps growing, albeit slowly, but it is still growing. Originally, I had assigned 2 large drawers to this grouping. Now I find myself outgrowing them. Not sure exactly where I will add the 3 MUTs I plan on getting whenever I can. It also bugs me that I am now having to split some of my larger MTs into this drawer, as seen by the 3 Waves and the Sideclip…and the few other things added in. I originally wanted to store the various Leatherman adaptor kits on this drawer, but I ran out of room. They are now residing in a lower storage drawer.

As you can see, no room on this drawer. In fact, I will be forced to move the minis up one drawer…if there is room, when I get that other Juice from Nuphoria.

Now this was originally a deep drawer to store the larger MT items. However, I had to add quite a few single items in here, such as a few Schrade products, the Leatherman adapter kits, MT.O special gear, etc… No room for anything else.

Remember that storage drawer that held my meager knife collection. Well, I eliminated much of that so that I could store the SOG overflow. The other right hand drawer now holds some of the Wenger and Vic collection items.

My utility knife collection has now filled up its drawer with no room for expansion. The other expansion drawer is not full of SAKs.

I had only given a big drawer for the Wenger collection, never thinking in a million years that I would outgrow the space. Well, I have. Now I have Wengers in other drawers as well. I like to keep similar things together, and this is bothering me a little.

Likewise, when I bought the cabinet and chest, I had a lot more Victorinox than I did Wenger. I figured I would stop once I had two large drawers full. Well that didn’t happen as seen by the filling of several smaller drawers. Regardless, this drawer and the next are full of Victorinox items.


The next drawer once held several compases and other items. Well, today, the Gerber collection has expanded into this space. Interestingly enough, when I first bought the chest, the SAK collection was going to stay in the upper smaller chest, and the MT collection would stay in the lower larger cabinet. Well things conspired and I had to switch the collections around due to various expansions. Then I got into Gerbers recently and had to put them down into the lower cabinet. So much for organization.

I had to use a relatively deep drawer for the Gerbers. A bit of a waste of space, but I had no choice.

The next equally deep drawer that holds the Gerber collection one drawer up is also full. Full with SAK kits, books, literature, advertizing stuff, cleaning and repair kits, etc… I took off the Swiss Army change mat that covered it all in many of the preceding drawer photos.

Now we come to the deepest drawer that holds all the real special SAKs. Those that I want to keep in their boxes, etc. Well, I am quickly running out of room here also.

Well, I can’t really believe it, but I have outgrown this storage space. There is still a bit of room, but that won’t last long. I do have several options, but some of them clash with my need to keep things a bit orderly. I can expand back into the corner curio cabinet, even though that is now filled with SAK and MT boxes and sheaths, or I can buy another unit and really organize things. If I do that, I come to a space issue. I really don’t have space in my small house for another unit without some major furniture moving. Another thing I could do I guess would be to put all the MTs back into their respective sheaths and just pill them in, but that would suck if I wanted to see what I had, and this would truly be an act of last resort.
Guess I have some thinking to do on the matter.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login