Piranha
-
Well, it's clear to me, one is a fish, the other a crustacean. ::)
Geeze!
-


Similar....yet different....
-
Hey, maby we could get a special run of these with MTO stamped on em? :D
Wheres the nail puller on this thing? And how does it hold the bit in place? I'm curious. I emailed them and asked. Told them they should make a video of this thing in action as I'm confusaled on how some things are supposed to work.
-
@Precise said:
Hey, maby we could get a special run of these with MTO stamped on em? :DWheres the nail puller on this thing? And how does it hold the bit in place? I'm curious. I emailed them and asked. Told them they should make a video of this thing in action as I'm confusaled on how some things are supposed to work.
Could it be a magnet that holds the bit in place

-
If it was metric I'd definitely be interested. I have never been in to Atwoods because of the expense. They are indeed great pieces and obviously collectable but for me I'd want a functional tool which wasn't overpriced due to it's collectability factor. I don't really keep anything in the drawer queen category either so I guess they never appealed to me for that reason.
I wear Seiko watches mostly, not Rolexs or Brietlings etc, but that's not just because they are out of my sensible spending limits, it's because I think having a lower cost, ubiquitous item is absolutely fine, especially if it does the job just as well.
Horses for courses eh? Buyers decide these things ultimately :)
-
OK, I must comment here as the "Atwoods are too expensive comment" is a pet peave of mine. :D
Atwoods are only expensive amoungst the collectors, they aren't actually expensive from Peter himself. This tool for example is listed as being up for $50. That could get you quite a few Atwood tools (obviously not the fancy pants ones) if you are just quick enough to get them.
Peter charges I belive good prices for what he makes. It is only due to the limited number he does that the prices rise up.
-
As someone who got bitten by the Atwood bug and stumbled into the deep part of the pond for a bit, IMO,
Yes, you can get into seriously expensive tchotchkes pretty easily.
However, if you stick to Peter's Blog (and maybe even email him directly, he's a very nice guy), you can get his functional basic tools for a very reasonable price.
I look at my Wildcard and Atwrench and I am amazed at how handy they are. Much easier to reach for quick use and their tools are extremely high quality. Deceptively good.
-
Man, they are quite responsive. Less than a couple hours after sending the email I got this.
Hello Joshua,
The bit is held into the tool with a piece of military spec neoprene rubber which interlocks into the steel frame of the tool. It is quite secure. We use the pry tips of the tool to lift the head of a nail and then insert the head of the nail into the slot for added leverage when needed. A YouTube video would be a great idea! Thank you for your feedback!
Happy Holidays,
D.J.
The MK7 Design Team
And as far as this whole Atwood thing goes. I'd love a G3 prybaby. I watch the blog constantly trying to get one. Haven't got one. I am going to get this though.
Is that going to keep me from buying a G3 from Peter if I get the chance? Nope.
**I want all multitools. Every. Single. One. **
'Nuff said. -
@Grant Lamontagne said:
Gentlemen, some of us have strong feelings on this matter, so let's try to keep it civil and not fly of the handle or get offensive. The simple fact is that like anything else, love it or hate it, Atwood's designs are out of the box now, and free for interpretation from just about any source. You can like it, you can hate it, but like the sun coming up tomorrow, it's a fact.And, each of us has the right to make a choice to buy or not buy whatever we want, based on our own preferences. To dictate what someone should or shouldn't buy is as welcome as someone dictating to you what you should and shouldn't buy.
Def
Did I tell someone they couldn't buy it? Like you said, I have my opinion... ::)
-
I don't think they are "too expensive" guys, just too pricey for me at the moment.

I know that Peter sells them for less than the hyped up prices collectors will pay later and that's up to them of course. Things are worth whatever folks are prepared to pay I guess, that's how a consumer driven market works.
-
I would like to calmly say one last thing. I'm not against new ideas and new tool designs. I know Peter Atwood didn't invent the pocket tool and I know they've been around for 100 years. I know there are some other makers who make fantastic and original pocket tools, but where I draw the line is when somebody goes over to Peter's (or any other makers) site and says "Hey, let's make that". I know I'm in the minority here, but let me give you guys an example that might make some sense. Raker Tools are a supporter of this forum and Ray has to pay for that right. Do you guys think it would be fair if someone took Ray's ideas and changed them a little and said here go buy me? If you do, then that's your right to do so but at some point we should take a stand for the people who support this forum.

I'm done ranting now. :D I hope I gave you guys something to think about. ;)

-
I don't feel like getting into a debate cause I am tired, all I wanna say is....
I WANT ONE!!!!!!!!!!!!!!!!!

-
I do like their nail puller slot....
-
So if they were a member on here and a board supporter it would be Ok for them to make it? I am still confused on your logic of this but as I said before everyone has their opinion and can choose to buy or sell whatever they like.
-
@RaptorMan said:
So if they were a member on here and a board supporter it would be Ok for them to make it? I am still confused on your logic of this but as I said before everyone has their opinion and can choose to buy or sell whatever they like.No, actually what I meant was would you like a design "borrowed" from a person who supports this forum? I was trying to give a different angle that's all... ;)
-
Whether they support this board or not is immaterial. This board discusses tools- we review, we report and we offer opinions. We don't control the multitool industry, and we don't dictate what people can and can't buy. We simply inform people on what is out there. Blaming this board for promoting that is like blaming CNN for an earthquake.
One piece keychain tools are a good idea, and that's why lots of people are doing them. Yes, Peter Atwood popularized them in the modern age, and deserves credit for that. I have never tried to hide that, however this situation is akin to Tim Leatherman's great new product circa 1983. Since this site is Multitool.org, we report on multitools- if only the original was important and the rest were to be dismissed as copies that steal the food from children's mouths, then I would have started everythingbutthePSTiscrap.org.
And, I would also like to point out that I am well versed in the frustration revolving around copycats out there. Ask me over a beer some night about how I feel I about multi-tool.org, especially when you consider that most of the original info there came from this site and this community. Of course the owner of that site insisted he wasn't stealing our name. And, that's not the only one out there- I have a list of Swiss Army Knife and multitool sites that have copied what I've done, or the communities I've built. However, like any other copycat, they will live or die by what they produce, just like PocketToolx.
The banner is a way to promote tool manufacturers- I don't put their names up here to advertise this site, and I have turned down banners for retailers that I felt weren't up to par. This community deserves to have all the information so they can make an informed decision. And, when they make that decision, it's important that there are responsible dealers willing to help them properly and look after their needs. Off the top of my head I can offer several dealers or retailers that you don't see promoted here because they weren't up to snuff.
And, if this tool is a hunk of crap, we'll report it as such. If it's useful, then we'll say that too. They will live or die by their own tool.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

:D