which multitool for electronics?
-
Hi,
I am an electronic engineering student and for over a year I have been carrying my Wenger Minathor. It has coped with most of the stuff I throw at it, however I am now looking for something to compliment it, as it is conspicuously missing several key tools that I need, pliers, and most importantly, wire strippers.I have been looking around, and although the tools with dedicated wire stripper heads look the best, neither of the tools I could find with this (squirt E4 and bear jaws) can strip the 22 AWG wire I use for breadbording. So that really just leaves the SOG wire stripper tool put into one of their multitools as far as I could find. I am not sure which one though, the paladin pt-540, powerassist or the powerlock 2.0.
any suggestions please?
-
The PT-540 is made for electronics, not the easiest to find in the UK though.
-
As an ex-electronic engineer myself, I wouldn't get too hooked up on the wire stripper tools on MT's. I hate to say this and I will be lynched for saying so :D, but a dedicated set of side cutters will prove priceless in this career. Don't be afraid to spend quite a bit and get some decent snap on's or something similar.
Oh, and then get a multitool as well. :D
-
@Benner said:
As an ex-electronic engineer myself, I wouldn't get too hooked up on the wire stripper tools on MT's. I hate to say this and I will be lynched for saying so :D, but a dedicated set of side cutters will prove priceless in this career. Don't be afraid to spend quite a bit and get some decent snap on's or something similar.Oh, and then get a multitool as well. :D
I have to agree with Ben on this one, a good set of small side cutters will probably be worth more to you than any multitool, I was always a fan of Knipex or Bahco myself.
A feature that might suite on a multitool you are replaceable cutters, found on the updated Gerber multi pliers 600 and the Leatherman Super Tool 300. I don't have either of these but I'm sure someone will come along and give some more details. :)
-
The SOG PowerCut would have been a good contender. If they hadn't discontinued it. :'(
-
I already have a pair of knipex ESD side cutters, but I just don't have them on me every day as they are in my toolkit, and are a little awkward to keep in my pocket or on my belt as (obviously) they don't fold.
I guess I should have been clearer, I have a dedicated set of tools for building circuits, this is just for making the odd modification.
-
Leatherman Charge TTi, it has a great compliment of tools.
I work in electronics and have dedicated tools for everything, but the Charge is a great tool to have in a pinch.
What sets the Charge TTi apart form other multi-tools for this kind of work?
- One hand opening (and closing) blades, for when you have your hands full.
- The serrated knife blade has a guthook/string cutter which is great for safely opening boxes or breaking down boxes. This comes in handy if you deal with boxed equipment.
- Precision screwdriver bits, occasionally you find yourself away from your dedicated tools but these work fine.
- A good, usable, crosspoint screwdriver. Also great as a backup to your toolkit.
- Scissors come in handy occasionally, and the Charge scissors are great.
As far as the PT-540, I like the tool and I am currently in the market for a used one but my main concern is that the wire strippers, which are by their nature an expendable item, are built into the head of the pliers. This means that if you wear out your wire strippers, which is conceivable for a heavy user, then you have to replace the plier head or the tool itself. The PT-540 is also a very large tool by all accounts.
The Powerlock 2.0 with the wire stripper attachment installed would seem to be a good fit, but I would be concerned with the new piano locks on the 2.0, i don't care for them at all and they make it more difficult to unlock blades than the older models. You may want to consider the older model as well.
The PT-510 should be a great tool, but it has no locking blades, which may or may not factor into your decision.
Personally, if I needed a wire stripper I would carry the Charge TTI and a Squirt E4 for it's wire stripper, but as you said it doesn't handle the wire size you use so you could back pocket carry a dedicated wire stripper.
Food for thought.
You should experiment a bit, and decide what works best for you. Be sure and let us know what you come up with and why you chose it.
-
How about the Victorinox Cybertool range? :)
-
I agree with Ben I have knipex side cutters,pliers and a dedicated auto wire stripper when working with cable/wire,also I would opt for a dedicated small electrician's knife for stripping insulation too.
-
What about the Paladin models? Like the PT-540 or PT-525. They're made by SOG too.
-
the pt-540 does seem like an impressive tool, and am seriously considering it and putting the sog wire strippers in it. However it is made for electrics and not electronics, so I am unsure how useful its features will be to me. It also seems somewhat larger than the powerlock 2 and power assist, although I am not sure how much larger. Does anyone have comparison pictures?
-
@Magnus said:
the pt-540 does seem like an impressive tool, and am seriously considering it and putting the sog wire strippers in it. However it is made for electrics and not electronics, so I am unsure how useful its features will be to me. It also seems somewhat larger than the powerlock 2 and power assist, although I am not sure how much larger. Does anyone have comparison pictures?/topic/3146
Check out this thread. It's a beast, it makes the surge look small.
-
The PT-540 is huge. I do a lot of tinkering and although I own one I've got to say it doesn't really get used :-[ If I was running cable every other day I'd love it though. Its still a pretty cool tool to own just because of its gargantuan proportions

The tool that see the most use in this line is my custom Cyber Tool. Other tools I'd recommend for electronics rather than electrics is a Leatherman SideClip or PST. They both have nice thin light weight plier heads.
-
I've been looking for the LM Squirt E4 at my Radio Shack stores but none so far has any stock. I may have to break down and buy online.
Another option that I will put together is to use one of my SOG Powerlocks (S62 or B69) and remove the blade and replace it with the wire stripper tool. I like the needle nose compound action of the Powerlocks and the crimpers work really well. This will go into my tool bag.
Oh, and I also just got the Vic Electrician Plus. This has most of the basic electrical tools I would need except for a crimper.
-
@TangoDown said:
I've been looking for the LM Squirt E4 at my Radio Shack stores but none so far has any stock. I may have to break down and buy online.Another option that I will put together is to use one of my SOG Powerlocks (S62 or B69) and remove the blade and replace it with the wire stripper tool. I like the needle nose compound action of the Powerlocks and the crimpers work really well. This will go into my tool bag.
Oh, and I also just got the Vic Electrician Plus. This has most of the basic electrical tools I would need except for a crimper.
I have a New in Box one for sale. $33 delivered.
-
I'm thinking a Cybertool . You are much better off with proper cutters an strippers , but an extra driver or two , and the other implements always comes in handy .
Chris
-
I'm going well with my cybertool.
I've used the SOG strippers once or twice, too, since when I added them to the swisstool.I haven't much to do in electronics, but in my parents' motorhome the ***tools did the job of mounting a flatscreen, its cables and the LED lamps I assembled (I needed a soldering iron, but it's all)
-
A Squirt E4 and a Cybertool 34 makes a great E-combo.
-
@american lockpicker said:
I've been looking for the LM Squirt E4 at my Radio Shack stores but none so far has any stock. I may have to break down and buy online.
Another option that I will put together is to use one of my SOG Powerlocks (S62 or B69) and remove the blade and replace it with the wire stripper tool. I like the needle nose compound action of the Powerlocks and the crimpers work really well. This will go into my tool bag.
Oh, and I also just got the Vic Electrician Plus. This has most of the basic electrical tools I would need except for a crimper.
I have a New in Box one for sale. $33 delivered.
So tempting but bad timing with the holidays and all. If you don't sell it off by mid-January, I'll get it then.
-
Thanks for the advice guys, I went with the PT-540 in the end, and may get the powerassist at a later date. Given the advice here seems to consist of "buy both, and then buy some more" ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login