PT-510
-
So I have a few questions. First, when I get all the components I want into place, do I remove the Loctite that is already on the screw and then reLoctite it or just Loctite over the old Loctite? Does anyone know a good place to get Loctite cheap? I don't need that much at all. I am debating whether to get the can opener or the large flathead to fill out the last spot. Any advice? I also emailed SOG about getting some more white washers, so I can still use my tool as I round up the components I want. They sent them out to me for free. I am still searching for some SOG scissors. One last question. Couldn't I file down the Phillips driver to make it a #2?
-
@ari6126 said:
So I have a few questions. First, when I get all the components I want into place, do I remove the Loctite that is already on the screw and then reLoctite it or just Loctite over the old Loctite? Does anyone know a good place to get Loctite cheap? I don't need that much at all. I am debating whether to get the can opener or the large flathead to fill out the last spot. Any advice? I also emailed SOG about getting some more white washers, so I can still use my tool as I round up the components I want. They sent them out to me for free. I am still searching for some SOG scissors. One last question. Couldn't I file down the Phillips driver to make it a #2?I would remove as much of the old Loctite as possible, but most of it will come out when it's unscrewed in the first place, then put new Loctite Red in the pivot. As far as getting it cheap, Lowes has it for $7.38. That's way more than you need but it should do the trick.
I have taken apart and a SOG and reassembled it without adding the Loctite and never had trouble but it's best to be safe.
Here is a great thread regarding Sogs and Loctite /topic/4438
Good reading and enjoy your SOG.
-
I bought some blue Loctite on Amazon, so that's all set. I also got two white washers from SOG, so I reinstalled the wirestripper. I used my tool for the first time at school, to open the iris slot on a Source Four. The Phillips worked fine for that.
-
Glad to hear that you got it back together,and blue is the right one to use for smaller hardware,red is for larger bolts and nuts with more vibration.
& 
-
I used the pliers on the PT-510 yesterday to help the sound crew remove an antenna. I caved and bought the scissors and a large flathead from SOG. As soon as I get them, I will begin writing the "The Bladeless Battle." About the Loctite, SOG says to use blue, I guess because the nuts are small on the multitools.
-
I concur, blue is the right one. I use red on everything though as I got it cheap :D
Funnily enough I bought it from an ebay seller called "blueloctiteman" or something, but he only had red. Go figure

-
Both will work of course but since the ones I have disassembled were shipped from SOG with Loctite Red, it seemed prudent use red to put it back together.
-
The RED theoretically requires heat if you want to remove it, and is generally marketed as "permanent". Blue just needs hand tools and is usually marketed as "removable". I can't image using red Loctite, as every time I've used it on larger bolts it does require heat to remove. More often than not, the heating causes the metal to expand and makes it even harder to get out.
More on subject, does the PT-xxx come with wire-strippers like the PowerLock/PowerAssist have, or are they built into the handle somehow? From the product page at Paladin, it seems like they are built into the handle.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login