Which FOLDING KNIFE did you carry today?
-
edap,
how does it clean up after use say with peanut butter? :D
Revolvergeek,
Looks like you were well equipt. I love those yellow saks.
-
I use an old tooth brush in cleaning the serrated edge, Sean.
-
My trusty Emerson HD-7.

-
Buck 110 today
-
UKPK :D
-
Commander today which got treated with a good sharpen.
-
Easy enough to sharpen?
-
After a bit of reading up I found a good way of sharpening with the Sharpmaker. Literally takes seconds to get a shaving sharp edge.
-
Link please!

-
That's good. It's always easier too if you keep them on the sharp side all the time rather than
let them go really dull before re-sharpening.The sharpmaker comes with a DVD that shows how to use it on just about everything takes
an edge. I'm not sure if there is a link to it or not. -
My folders seem to have gone out of the EDC rotation , bout the closest thing I pack these days is the OH Soldier .
Chris
-
I'll see if I can find the diagram which showed it really well...
-
Can't seem to find it now, but basically you put the rods in the 40 degree slots as normal and then raise the right hand side of the base of the Sharpmaker until the rod on the right is completely vertical. Then you sharpen the one side until you can feel a burr forming on the unground side and then by resting the blade flat against the vertical rod, you knock that burr off. Works really well.
Carrying said Emerson today with my Ferrrk'd scales;

-
the little esquire in my hip pocket,

paul

-
Delica 4
-
@Benner said:
Can't seem to find it now, but basically you put the rods in the 40 degree slots as normal and then raise the right hand side of the base of the Sharpmaker until the rod on the right is completely vertical. Then you sharpen the one side until you can feel a burr forming on the unground side and then by resting the blade flat against the vertical rod, you knock that burr off. Works really well.Thanks!

So you practically end up with a 40 degree chisel-grind edge (and btw a left-handed at that), correct? I somehow thought that Commanders are V-grind and you were right-handed... :-\
-
They are V-ground, but have a chisel ground edge (if that makes any sense). The grind is on the "wrong" side on all Emersons. Can't remember the details but it is kinda his trademark. John will know more than me.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
