What Did You Use Your Multitool For Today?
-
Today was a vacation day home on the farm. With real winter coming tomorrow (lows in the teen's F (-5 to -10C) ), there were several barn projects that needed attention.
One of the automatic waterers was kicking the breaker. I needed to remove the cage and unbolt the heating unit.

Used the Charge for pliers duty, and the Atwood Funnybone for all the nuts EXCEPT one which required the Guppie. Forty minutes later, I had replaced the broken insulators and ready for the cold!Next up, one of the waterproof light switches had to be replaced because a horse had chewed it up. Raker Ring tool removed the old cover nicely and made short work of the new one. Fifteen minutes start to finish.
Finally, 2 of the outdoor GFCI outlets had stopped working and needed replacing. Another job for the Charge. Upon opening, each had a few tablespoons of water (15-20 mls) and massive corrosion. Old GFCI outlets removed, boxes dried and cleaned up and new GFCI's installed. One of the coverplates had to be replaced as well. Ninety minutes later, and the big tank heaters are ready to go...
Winter? Bring it!
Tool list:
LM Charge ALX: 2 GFCIs replaced and assist on automatic waterer
Raker Ring Tool: Waterproof light switch cover
Funnybone: Automatic waterer nuts
CRKT Guppie: One oddly placed nut in automatic waterer
-
@Mr. Whippy said:
Today was a vacation day home on the farm. With real winter coming tomorrow (lows in the teen's F (-5 to -10C) ), there were several barn projects that needed attention.One of the automatic waterers was kicking the breaker. I needed to remove the cage and unbolt the heating unit.

Used the Charge for pliers duty, and the Atwood Funnybone for all the nuts EXCEPT one which required the Guppie. Forty minutes later, I had replaced the broken insulators and ready for the cold!Next up, one of the waterproof light switches had to be replaced because a horse had chewed it up. Raker Ring tool removed the old cover nicely and made short work of the new one. Fifteen minutes start to finish.
Finally, 2 of the outdoor GFCI outlets had stopped working and needed replacing. Another job for the Charge. Upon opening, each had a few tablespoons of water (15-20 mls) and massive corrosion. Old GFCI outlets removed, boxes dried and cleaned up and new GFCI's installed. One of the coverplates had to be replaced as well. Ninety minutes later, and the big tank heaters are ready to go...
Winter? Bring it!
Tool list:
LM Charge ALX: 2 GFCIs replaced and assist on automatic waterer
Raker Ring Tool: Waterproof light switch cover
Funnybone: Automatic waterer nuts
CRKT Guppie: One oddly placed nut in automatic waterer
Good job! Sounds like a fun day in my books

-
I was at McCormick&Schmitts for dinner and the rolls were crusty, and I couldn't cut my roll with the regular dinner kn ife. So I used the serrated blade on my LM Juice XE6.
The roll didn't know what hit it!!

-
Whipped out the old K502x and got the screwdriver to work today opening a sink unit to sort the plumbing. The bottle opener was just the right shape to pry a cover off, saving the knife from prying duties :D. The karabiner kept the tool in easy reach whilst I wasn't using it.
In fact, the only part of it I didn't use was the knife...

-
I used the pliers of my ST300 to unscrew two busted lightbulbs out of a chandelier.
-
ST300 to give service to an old cisco router :)



-
Used my Charge and Micra to replace the 12v transformer and associated wiring on a kitchen spotlight.
And my UKPK to open the box :D
-
Used to ST300 to put up a magnetic knife rack:
Awl to make the holes
Screwdriver to... well, do I really need to explain :)Did a great job.
Use My Raker tool to sort out a loose door lock. Used the cutting hook to free a pair of jeans from the washing machine after it horribly mangled them.
Then I used the ST300 again as a makeshift paperweight :)
-
I used my MP600 today to put together bottle bins (for bottle return machines) it worked well as a hammer, a prybar, an ice pick and most amazingly of all SOME PLIERS!!!!, It also opened a box that came in the mail, cleaned my nails, and opened sugar packets for my coffee.
Andy
Oh and I used the phillips driver a bit.
-
I went to Walmart to buy two bikes to donate to a Christmas toy drive. They did not have any put togather. So i ended up putting the bikes togather with my small Tinker and my Spirit.
Mike -
Used the backspring phillips on the Tinker to take apart the vacuum to replace a broken belt. Worked like a charm. :)

-
Used my Spirit X to remove the mirror from the back of a dresser so we could rearrange my parents' bedroom, then later used my Explorer Plus (or was it the Cadet or OHT?) on something else.

-
Well, if you can call a snowshovel a"multitool", then I was using my snowshovel to dig my car out of knee deep snow!!

-
@BIG-TARGET said:
Well, if you can call a snowshovel a"multitool", then I was using my snowshovel to dig my car out of knee deep snow!!
Sure it's a multitool...You can scoop, scrape, cut roots, pound things, pry things, and dig things...could be used as weapon, that's like 7 functions right there...so +1 on the shovel. LOL!
-
Well, if you can call a snowshovel a"multitool", then I was using my snowshovel to dig my car out of knee deep snow!!

Sure it's a multitool...You can scoop, scrape, cut roots, pound things, pry things, and dig things...could be used as weapon, that's like 7 functions right there...so +1 on the shovel. LOL!
Does it come with a pocketclip... :ahhh :D
-
Well, it wasn't my multitool, but I got to use my LM c301 a good bit today, opened a couple of bags and used the serrated edge to make accessing boxed cans a bit easier.
Normally I don't like serrated blades, but I'm starting to see just how useful they are.
-
We had an early xmas today with one side of the family so the Spirit was used quite a bit. I opened boxes installed batteries those sort of things.
-
Today was the Christmas play. "Don't let the Grinch steal your Christmas." Throughout the last couple weeks I have used the Wave quite often.
Tonight we cut line for the star and we scored the paper where the Grinch was going to come thru.
Cut cardboard turned screws done alot without even thinking about it.
-
I used a Spirit to adjust a toilet cystern and replace yet more spot-lights / transformers. I used the UKPK to strip some old insulation tape whilst remaking connections and to open some fiddly packets.
I also used the Spirit to open a bottle of beer, although it took me an age to find the bottle opener :-\ I got there in the end though.
-
I uesd my Campion's magnifying glass to look at a $5 and $20 bills. Did you know that on the back of the 5 it list just hampshire not new hampshire, on the lincoln memorial
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login