The Hustler
-
Not my first SAK mod but the first one for myself.
I have the pleasure to present.. The Malandro aka The Hustler

This baby may just look like the love child of a moneyclip and an executive chained to a quattro screwdriver upbringing but appearance are only skin deep.

The original idea for this baby was simple. When i travel i keep a big loud 'hey me' wallet with some small change and a visa debit card and a plain moneyclip (not the SAK) with another visa, ID and large denomination in my cargo pocket. If i get robbed, pick pocketed or simple loose the wallet i am not stranded on foreign soil. (so far scenario 3 has proven to be the only frightfully common... if someone can actually pick pocket me in a deserted street while i am on a push bike they are extremely talented)
So if i use a moneyclip why not a sak one? :tool: the Victorinox Moneyclip is a little light on the implements, i have
perharps been spoilt by the awesomeness that is the 58mm Midnight Rambler.
My original idea was to start with a moneyclip add a 58mm phillips combi tool, a orange peeler and wenger fine screwdriver and replace the nailfile with a serrated 64mm blade opposite the main one. I figured it gave me a nice tool layout at double the body thickness of a regular Moneyclip.
The problem is although the wenger tools do have 2mm holes and fit in to the victorinox spring system the 74mm small knife/nailfile is a smaller profile pivot. So 64mm tools fit well in the 74mm nailfile or peeler spot but not opposite the main blade.
To cut a long story short i kept redisigning the damn thing with a mix of parts from a wenger tool chest, the executive and moneyclip. I am not a nail file person but as i was hunting around for info on 74mm and 64mm saks i discovered the full size nailfile is good for light non-nail duties... so i started trying to get it into my design. I wanted the serrated blade, i wanted the fine philips.. i eventually was trying out the awl. Each design i came up with always
ended up with some vexxing flaw.. nail nicks in the wrong spot, to chunky etc etc
I even was lucky to get a wenger vip in a fodder lot, by then i thought my prayers had been answered, full size main blade same thickness as a single layer tool (enabling me to hae a full size blade and a serated on one for the same space as a victorinox blade) and a robust serrated wenger scissors i gave up on the scissors cause they where just a little thicker than the vic counter parts.. then after a trial run on the vip blade with individual springs or the blades i realise the vip holes aren't 2mm! (maybe 2.2, will check eventually)
In the end i went with the Executive layout, eventhe combotool which began the adventure is missing, during the saga i had bought a lot of Quattro screwdrivers and now i have both the 58mm and 84mm philips profiles on it.
one of my ideas was to repofile the moneyclip nailfile into a flat philips but quite a few 74mm fodder saks i have show severe warping on blades and files. I used M2 bolts to put it together through the whole thing i am leaving it as is for now but eventually i will put proper brass rod through it.. right after i have a tweezer groove engraved into the alox scales :o -
Fine looking mod that mate :)
I know your switching to brass eventually, but I'd be keen to know how those M2 bolts work out for you :)
-
My main gripe with the bolts is they interfere with the money clip.. i can only fit two credit cards and a few bills and its at max capacity Once i switch to brass it should take 3 cards and extra mula

Also forgot to mention the pimp-daddy chain that runs from the keyring to the Quattro piece is from a Wenger so it's swissie-kosher-goodness :_c: What i need to know is... does this count as one or two items for EDC paring?

Other things i am considering is grinding the small blade down into an Awl (might start with the nail file as its got more meat to shape) or perharps go the emergency blade from a 58mm...

-
I think the rockwell on the file might be a bit too high to make a decent blade

-
Wow Santos, kudos on you for even taking on a project like that!

-
@J-sews said:
Wow Santos, kudos on you for even taking on a project like that!
Thanks, but the madness never ends :ahhh
You see i have realised the above is not a genuine Malandro but a run of the mill type Hustler, the two are understandable mistaken for each other. Once i get hold of a
sacrificialfodderdonor black money clip the Malandro will let himself be seen, surfice to say he will have the serrated blade &eyeglass screwdriverawlummm 'to be confirmed' :DAt the moment the Hustler is now on the keychain on probation as i gave away my black midnight rambler to my cousin who was admiring it.
-
@Santos said:
My main gripe with the bolts is they interfere with the money clip.. i can only fit two credit cards and a few bills and its at max capacity Once i switch to brass it should take 3 cards and extra mula
Also forgot to mention the pimp-daddy chain that runs from the keyring to the Quattro piece is from a Wenger so it's swissie-kosher-goodness :_c: What i need to know is... does this count as one or two items for EDC paring?

Other things i am considering is grinding the small blade down into an Awl (might start with the nail file as its got more meat to shape) or perharps go the emergency blade from a 58mm...

I hate to bear bad news but contrary to appearances, the small blade on the Executive is not interchangeable with the 58mm main/emergency blade- the Executive/Prince blade is thinner and smaller. :-\
-
yes worked that one out :D
the set up has been great so far... just need to add the wenger tweezers
-
Somehow I missed this first time around, nice job Santos.

-

Update i may need to grind down the bolt heads so i can get clearence for the $$$... that way i can just swap out dmaged components rathernt han repinning it each time
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login