LM Surge help
-
I have had my surge for about a month now, and i love it alot. I have only one problem. While i had a sak beforehand, it didn't really need cleaning, so i am inexperienced in cleaning a multitool. I have been using wd-40 as the oil, and i keep my blades and tools clean. I have a problem with my normal blade being not as smooth as the serrated one, in terms of ease of opening. I have also had a problem with the handles, with one being obedient and the other being >:D. How should i oil these correctly? Thanks in advance for the tips in advance. ;D
-
Here are some of the better ideas I had:
http://www.sosakonline.com/index.php?option=com_content&task=view&id=127&Itemid=35
Works for multitools too!
If a blade is "gritty" and you can't clean it with dish soap and/or a toothbrush, try using unwaxed dental floss between the blade and the sides of the tool and you might get some good gunk out. Be careful when doing this with the blades open!
Def
-
Thanks a lot! ;D It works much better now, and i now know how to clean my sak and LM
. Nice article on sosak by the way. -
Thanks... there are a few good ones there, but you have to search through lots of crap to find them! :P
Def
-
I bought three of these cleaning sticks from www.countycomm.com and they work great for things like SAKs and multis. And they are cheap!
-
One of the big mistakes people make with knives, multitools, pliers, pruners, cutters, etc. AND locks is they use a wet lubricant to get them freely working. This works, for a limited time... what happens is the wetness attracts dust, dirt, etc to eventually build up and cake and eventually causes problems with the dirt caking. A weapon is different because you can open it up and break it down and properly clean it and WIPE it with a cloth sprayed with a wet lubricant.
To eliminate this " caking" problem I always use dry graphite to lubricate locks, knives, multitools, etc. , then there is no wetness. True the graphite is a little messy to use, but usually a dry brush can clean up any mess on the tool and then wipe the implement(s) down with a cotton cloth.
-
I just use a hot soapy water and a tooth brush, and make sure it's completley dry before I put it away, a hairdryer helps if your in a hurry :)
-
After i use the wd-40 oil, i dry it and use a soapy toothbrush like micky d, then i use some floss to get anything out.
-
Nope! Lighter fuel for zippo's is good, petrol's not too bad and permanent marker will do in a pinch!
-
Fair enough! What sort of work did/do you do for shell?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login