Getting a multitool: Leatherman or Gerber?
-
You're top of the list buddy :P
-
@TangoDown said:
While we're at the knife edge, what the hell is that edge angle sharpened to? It's 420HC! put 20deg on each side. That edge will roll at the first tough material it encounters. I'll be re-profiling mine.From Leatherman:
What are the blade angles of our knives?
The main bevel grind (the overall angle that defines the knife) varies slightly depending on the product but is close to nine degrees.
The actual cutting edge grind for all plain-edge knife blades is 32 degrees. This is the same angle used on all our plain-edge blades — Crater and Expanse series and our multi-tools.
When sharpening with any system, the included angle should be around 32 degrees.
-
Just goes to show you that what matters most to people can be very different. I will agree to disagree with you Dave. I respect your opinion on this matter and do not wish to drag this on. Both are solid choices and the beauty of it is there are many more to choose from.
To the OP, I apologize for the hijacking into a debate.

The Wave is a fine choice. I have one myself and use it on occasion. And I'll use it some in the future too because it is a well designed MT. And I'll use my SOG's too for the features bring to the table.
-
@TangoDown said:
Just goes to show you that what matters most to people can be very different. I will agree to disagree with you Dave. I respect your opinion on this matter and do not wish to drag this on. Both are solid choices and the beauty of it is there are many more to choose from.No need to mate. Just tell Dave that "LMs rust, Vics don't" (preferably accompanied by "neener neener neener") and it's all set.
:P :DPS: FWIW Dave's opinions on multitools are (imho) among the most objective around here. He just has this thing for Swisstools and the whole Swiss perfection notion that manifests in a somewhat hostile way that makes him seem anti-Vic from time to time. He's not... If anything, he does know that "LMs rust, Vics don't". :D
-
Hobbit , if I were you , I would get a Wave . I'm not a fan of most Gerbers . Some of their models may be OK , I just don't have the patience to sift thru the Dreck ! The Wave is a competent multi that will give good service . Personally , I would prefer the Old Skool Wave without the new fangled bit holder , but thats just me .
Enjoy whatever tool you pick .
Chris
-
@Nikos said:
He just has this thing for Swisstools and the whole Swiss perfection notion that manifests in a somewhat hostile way that makes him seem anti-Vic from time to time.Haha. :D
I've never been hostile about the Vic tools, I just take exception to people stating, as fact, that the Vic tools are "perfection", when it's such a personal thing. The Swiss fans seem so bloody evangelistic too :D
The OP wanted to know whether he should get a LM or a Gerber as he'd narrowed it down to those already then there was the predictable "boing - buy a Victorinox" response :D (I'm not going to look back and see who did it so I can't be accused of singling anyone out, but the answer to "Leatherman or Gerber?" isn't "Victorinox" is it)? :P
-
Hi guys! A Merry Christmas to you all! Which means......
I recieved my Leatherman Wave yesterday! :D
Thanks to everyone! First use yesterday for it was to open a present where some cheeky person had taped over all the edges so you couldn't get your fingers under to open it! So not long after having the LM it had already had a use!
I'll report back some time next month again, as I've got a couple of shows on next month, mainly panto of course! "Oh no he hasn't" I hear you all cry! ;)
There is just two more things to ask :)
Firstly, what does EDC stand for!! I keep seeing it all over the forum! Is it EveryDay Carry? That's the best answer I could find from Google, and does seem to fit what everyone says, but I thought I'd make sure ;)
Secondly, I am nearly 18, yet, of course, that still makes me under 18! Obviously I'm not allowed to buy knives etc, but what's the law on under 18s carrying them? Obviously, the wave is a no no anyway, due to the locking blade (as long as they don't catch you ;) ), but what about smaller, non locking blades for under 18s?
Many thanks,
Hobit :) -
I'd vote wave . Build quality on Gerbers is suspect . The flik pliers are a good gimmick , not much use . I used to enjoy them for scaring the Doo Doo out of police and security , sounds lots like a semi getting it's slide racked .
Chris
-
EDC is every day carry.

-
Congrats Hobit - that's a great Christmas present you've got there, and I look forward to hearing how you get on with it as time goes by.
The question about the UK knife law....
I got this from Police-Information.co.uk as it seems pretty well laid out:
Public Place
Source: Criminal Justice Act, 1988. Section 139(1).
Offence: It is an offence for any person, without lawful authority or good reason, to have with him in a public place, any article which has a blade or is sharply pointed except for a folding pocket-knife which has a cutting edge to its blade not exceeding 3 inches.
Powers: Arrestable offence.
and the relevant bit:
Sell to under 16
Source: Criminal Justice Act, 1988. Section 141A
Offence: It is an offence for any person to sell to a person under the age of 16 any knife, knife blade, razor blade, axe or any other article which has a blade or is sharply pointed and which is made or adapted for causing injury to the person.
Powers: Proceedings should be by way of a summons only, unless any of the conditions of s.25 of PACE 1984 are satisfied.
There doesn't seem to be a minimum age to carry a blade provided you comply with the first bit I quoted.
From that, I deduce that if you can buy a knife at 16, and it's "legal" - you are fine

-
Thanks very much! So, curiously, how many of you do carry MTs with locking blades if it is prohibited in your country? I'd want my Wave on me "just in case", and it would be out of sight, etc, and I'm not one to cause suspicion (though have been accused of shoplifting from ASDA because I gave the security guard "a funny look", showed him the receipt and it was fine though :)). I know people who do have their MTs on them at all times. In fact, I was with such a person one time when we were with the police as he had been burgeled, and his Gerber was on his belt, and the police officer said nothing about it. Thoughts anyone? :)
-
to be honest, I think a locking blade on a multi-plier type device isn't even going to get picked up, even if you do get searched, most people won't give a leatherman a second glance. Remember also the whole locking blade rule is just a accident of case law, not a hard and fast law written in an act of parliament.
-
It's a tricky one to answer really.
I do carry a Leatherman Charge, but I do so in the knowledge that I could be arrested for it. I don't actually think I would be arrested for it, but I need to be prepared for that eventuality, as the law is clear.
I wouldn't dream of waving it around in public, and when going to the pub or football matches, I leave it in the glove compartment of the car - i.e. I try to be sensible.
But it's illegal, unless I can persuade any interested policeman that I have a valid reason if they ask me.
-
Hi All,
"Leatherman rust & Vic's don't" - I've got 194 Leatherman multis, 57 Leatherman knives, 6 Leatherman pruners and NO RUST. Why, I wipe them down either when I put them away or periodically for the Blast that I normally carry. I have 6 or 7 Vic multis which don't rust because they stay in the drawer all the time as they are such a pain to open.
Regardless of the make of tool, the owener needs to take care of it. Remember stainless steel means STAIN less! Please think about ending this meaningless diatribe.
Thanks - Joe
-
I packed Leathermans for over 20 years , nary a spec of rust . All I ever tried to do was keep em reasonably clean and dry .
Hope you enjoy your Wave . The Old Skool wave was my longest running multi relationship , nary a hiccup from the ones I carried , or the three I gifted to others .
Chris
-
@joebw said:
I have 6 or 7 Vic multis which don't rust because they stay in the drawer all the time as they are such a pain to open.Lol. Sorry to selectively quote you Joe - but that made me chuckle. :D
I've never had a problem with any of my Leatherman tools either, and I really don't look after them or maintain them at all really. If they get wet, I tend to just wipe them on my trouser leg or something and they seem fine.
I've seen some horrible rust on tools that I've bought on ebay etc - but that goes for Leatherman, Gerber Vic et al - I've really seen no evidence that Leatherman tools are any more susceptible to rust than any others. Then again I've only got about 120 :D
-
Hello again!
I've had a busy few months and just remembered I said I'd come back and post pictures! Unfortunatley, as is always the case, I was too busy to take a picture, though I can say having my Wave on me was a great help, and it goes to every show and there's always a use for it!
I'd also like to mention that the customer service of Leatherman is great, for anyone looking to buy a multitool and considering a Leatherman. I (very stupidly) accidently dropped my Wave while using the small screwdriver bit, Needly to say it snapped as is to be expected. I dropped Leatherman an email, asking where I could purchase a new one (as I didn't think my stupidity would be covered in the warrenty!) but they just asked for my address and sent a new bit out, and I recieved it a couple of days later! :D
One thing to mention is about loosening it up. I'm trying to break into it still, so to speak, but it's still no where near as loose as I'd like. Does anyone have any suggestions? I've looked and it has been covered before, I see, but as I'm replying anyway I thought I may as well tag the question on the end!
Many thanks,
Hobit -
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
-
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
Would it be too much to ask for you to add that it's just your opinion? Especially when posting nonsense like the above.
Hey Dennis,
What's with the ULTRA sensitivity to gerber criticism ???
The other day i made a comment about gerber pliers being at the bottom of the barrel, regarding strength, and you called my comment BS, now you have your panties in a twist
over Styerman's comment. Chill out dude, we are all just giving our 2 cents.
I read comments on this forum that I tottally think are false on a regular basis and i just take it with a grain of salt.
Now if you own Gerber stock, that's a different story :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login