What Did You Use Your Multitool For Today?
-
-
I used the saw on my farmer to cut up the remains of the 10 pound holiday ham to give to my dogs. It took a while and some effort to saw through the big bone! All four dogs are in the backyard being real quite, happily gnawing on their ham bones. :)
-
Today mine were mostly just ballast .
Chris
-
Wave; to take down the outside Xmas lights

-
My MTs just kept my pockets from being lonely

-
Leatherman Surge
Knife- To cut a piece of foam to use as a sponge for applying silicone lubricant.
Pliers - To pull a spring through a tube
-
Gave the Wave a good clean and polish

-
Attacked a group of Ninja's with the BO Wave
-
I used my LM c301 to open up a pair of SAK's and a Shrade cheapie I got from the hardware store.
Used my Super Tinker earlier to break down a coke box for the trash.
-
Used my Hunstman Slim to wrap some presents for the wife, Cheers Gareth

i just saw this, you're very welcome mate.

Various SAKs went into cutting paper while wrapping (much faster than scissors IMO) and then my Pulse and P4 did quite a bit of unwrapping, installing batteries and cutting plastic ties etc.
how, exactly, do you cut paper with a SAK?
-
With the knife. My mum always used a butterknife. :D
-
@RaptorMan said:
Attacked a group of Ninja's with the BO WaveI hope they were not packing BO Mini's , you would of been SO Ninja rogered if they were :D :D :D
-
Went to breakfast with a friend , used my Vic Soldier to stir coffee . Our overzealous Server removed all our spoons .
Chris
-
@RaptorMan said:
Attacked a group of Ninja's with the BO WaveOnly a "group"?

-
Used my Hunstman Slim to wrap some presents for the wife, Cheers Gareth

i just saw this, you're very welcome mate.

Various SAKs went into cutting paper while wrapping (much faster than scissors IMO) and then my Pulse and P4 did quite a bit of unwrapping, installing batteries and cutting plastic ties etc.
how, exactly, do you cut paper with a SAK?
Well all I do is have the paper on the carpeted floor*, get a rough size and use the main blade to pierce and then slice through the paper. If the blade is sharp enough (and it doesn't have to be all that sharp), then it should glide through the paper as if it wasn't there. if the paper is thin and nasty then it's more likely to snag but normally it's not a problem.
*try very hard not to cut up the carpet, no pressure is required whatsoever ;)
-
couldnt find the right screw driver......leatherman crunch didnt care:


10/10 (considering i didnt have anything better suited for the job)
-
@cliosguy said:
couldnt find the right screw driver......leatherman crunch didnt care:10/10 (considering i didnt have anything better suited for the job)
That, to me, is the essence of what makes a good "EDC" multitool. In one word, adaptability. Good job CG

Myself, quite a boring day, but I used my Raker Ringtool to open the package containing my drink bottle holder, and the pliers on my Charge to thread the Tac Ties through the MOLLE webbing, as they were only just long enough!
-
Used both a Wave and a Surge to reassemble a Kick into a custom SAK type tool. Then used my shiny brand new Swisstool to take apart and inspect the switch on a space heater.
-
I opened up an old radio and tightened the loose knob of the tuning dial with a cybertool lite.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login