SAK tool mods?
-
Hi everyone.
Been lurking for a while and this is my first post.
Been carrying a SAK since i was 14 on and off (off when at school), so quite a while.
Started with a climber (lost :()
Currently the owner of:
camper
Huntsman
work champ
Handyman
Compact (the result of joining SOSAK)Also awaiting a Spirit plus with ratchet (as a result of lurking on here :D ;))
My questions, if you'll indulge me, are:
-
What mods have people made to the tools as fitted to their SAK? I have done a few (as seen on SOSAK), such as filed the screwdrivers flat, clipped the pen blade, filed the twezzers to a point and filed the shaft of the hook for striking a firesteel. i have, in the past, fitted DIY wooden scales to my huntsman, but found i missed the twezzers.
-
I have seen referance to using the hook on a compact to help the use of the pen; any ideas on how this may work? i may be being bone on this one ::)
Many thanks in advance.
-
-
Welcome to the forum Furry, you'll see a couple of other SOSAKers here as well (and a good number of other Brits).

The only other tool mod I've done is to re-profile the small blade into more of a Wharncliffe shape.
-
Welcome to the forum mate :)
I've not really modded any tool's, but would be keen to see your efforts

-
Thanks for the welcome fellas.
I'll get some phots up when i can work out this infernal electrickery! ::)
I have also sharpened the inside of the can opener - for cutting parcel tape (hate getting that gunk on the main blade) - and 'kissed' the awl with a file to make it a bit more pointy :o.
Both the above are also from the SOSAK site.
Thanks again
-
Welcome to the Swiss Forum!
It looks like you've already been quite active.
For the pen/hook just try it, open the hook and then place the pen in the liners where the hook would rest, close the hook back down, obviously it won't close all the way because you have the pen in there, only now the hook is really holding the pen solid. Adjust how munch length of the pen is in the layer and how far the hook closes. Now you have a large pen to grasp, the tip is sticking out very similar to the retractable pen on the 58mm models. Besides jholding a writing easier, when you set the pen down it is easy to find and you can leave it in there some time while you use other tools on the knife and then go back to using the pen.
You've probably heard of the 1988 ''Swiss Army Knife Handbook' book by Kathryn Kane that talks about some simple mods for the tools. Sounds like you're well on your way though.
You've probably seen the inside of the early 93mm knives that are filed for use as a scraper, that would probably still work on the somewhat thinner 91mm openers. I need to do the Canopener one for the packing tape, because I totally agree I hate tape on my blades, so I actually use a box cutter most of the time for packages.
Looking forward to seeing your pictures.
-
welcome and i look forward to seeing your mods, must admit i never use the hook on my climber so would be interested in seeing it when its done,

paul
-
Thanks again.
Icanfixthat: Ah, of course. i was trying to hook it inside the hook DOH! wasn't thinking like that; i was being bone, cheers fella.
I haven't read that book (would love to) but a few of the mods were posted on the SOSAK site.
I'll have to dig the camera out over the next few days
-
I had atually never heard of the can-opener-as-package-opener mod before. That is a really damn great idea.
-
@thebullfrog said:
I had atually never heard of the can-opener-as-package-opener mod before. That is a really damn great idea.A while back someone mentioned doing that as a Ty-Rap (ziptie) cutter, I keep meaning to do that. It could have lots of uses.
-
Recently I saw a Phillips ground into a marlinespike...I believe it was done on an OHT.
-
Welcome to the forum. We need more Brits on here

-
@Craig said:
Welcome to the forum. We need more Brits on here
I would suggest that is a matter of opinion :D
Greetings furry - I hope you find the path to enlightenment! The only mods I've done myself have been with stock Vic parts, I don't really have the tools or the confidence to start chopping stuff myself.
-
Welcome to the forum. We need more Brits on here

I would suggest that is a matter of opinion :D
Greetings furry - I hope you find the path to enlightenment! The only mods I've done myself have been with stock Vic parts, I don't really have the tools or the confidence to start chopping stuff myself.
Yeah, but you do a nice line in wooden scales.

-
@ICanFixThat said:
ù
**
You've probably heard of the 1988 ''Swiss Army Knife Handbook' book by Kathryn Kane **that talks about some simple mods for the tools. Sounds like you're well on your way though.
ùwelcome, Furry.
I've never heard of that book before. I do now, after googling.
now I have to read it.(damn!)
-
ù
**
You've probably heard of the 1988 ''Swiss Army Knife Handbook' book by Kathryn Kane **that talks about some simple mods for the tools. Sounds like you're well on your way though.
ùwelcome, Furry.
I've never heard of that book before. I do now, after googling.
now I have to read it.(damn!)
all I can say is, bloody 'ell
-
used, Paperback, 104 pages, "This book may or may not contain highlighting, writing, or other various markings and/or show normal wear.", <u>67-89£.</u>
I'll wait for the
scanmovie. -
Yea, i googled that book too and saw the price, hence the post ;) :D
Another one i did today was to take the file to the keyring holder, to give a bit of a point (not too much); might be useful to break car windows. Haven't had a chance to test it but should work similar to that on the rescue SAK.
Haven't seen that one on the net, but the thought occurred to me.
When i dig out the camera i'll post some phots (need to work out how as well).
Happy new year everyone!!! (i'll say it now, 'cos i'll be baggage later
:D -
I paid a lot less for mine, and I almost got one very cheap on ebay a couple months back, but I let another bidder have it since I already had a copy. I've been meaning to do a cover scan for the wiki, I better get on that.
Keep an eye open, hopefully they will show up.
-
@ICanFixThat said:
I've been meaning to do a COMPLETE scan for the wiki, I better get on that.there. I fixed it for you.
-
I've been meaning to do a COMPLETE scan for the wiki, I better get on that.
there. I fixed it for you.
Scanning no more published books is perfectly in the google books policy, I read on Wired.
(ok, ok, I know, but I had to try)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login