New guy looking for some advice on first multitool!
-
You really can't go wrong with something like the Wave. The functionality on it is great for the size and weight. I prefer belt carry, but that's because I carry one of the bigger tools around, 10 or 11 oz. I don't even know what that means, but apparently it is heavy or something

My person preference on tool to carry, since you will get a whole ton of options, is the...
SURGE!

Boy do I love doing that... :DWelcome to the forum

-
Speaking as an IT guy at a community college (he said, trying to offer a sense of camraderie), I usually carry a Crunch and a SAK in my bag. That said, my job doesn't require me to get out and deal with hardware as much as it used to, so my kit may not be as heavy duty as you need. That said, when I was doing some hardware work at home (PC repair, cannibalizing old systems for parts, etc.) last month, I found the best Go To tools were my Blast and an old multi-bit screwdriver.
As much as I love the Blast (it's the only duplicate MT in my collection), I'm really a huge proponent of multi-bit screwdrivers (not the auto-loading ones, but primitive ones) as an IT guy's best tool. You get drive heads that cover the majority of screws you'll encounter. You get a basic nut driver. You get a basic prybar, for opening up cases and popping out cards. You get a rubber mallet for pushing stiff cards back in the sockets. You do not get pliers, which is probably a downvote in a lot of cases.
Those are my recommendations: LM Blast and one of these.
-
I can't really comment on what would be best for your job, but as for carry options I can tell you that the Wave will weight down your britches a bit. :) I don't mind it, since I always wear a belt and tend toward cargo pants. It does fit nicely in a pocket though and you can buy a pocket clip for it. However, whenever I use the pocket clip on the wave, it tends to open in my pocket. I carry it in front pocket and while it rides very low, the tool has a tendency to open. I went out and got a small, padded camera case and stored both my phone and my Wave in that. I also have the Slider from Timbuk2 and the tool fit great in there when I was out and about but I wouldn't put in there with a phone. The Slider was the better set up for me, actually. Plus, when I was on my bike, it was pretty easily accessible from the stap of my bag. Phone just goes in the bag because I'm paranoid about my phone getting busted. :) All sorts of little pouches out there that clip to your belt or slide onto your belt to fit all kinds of little gadgets so you can keep everything without having a bunch of different holsters and such.
I will say this, if you want to be able to change out bits, Wave or Charge would probably be best bet. But the LM dedicated drivers are awesome! -
When in doubt, go with a Wave and pocket clip. Or upgrade to a charge, which comes with a detachable pocket clip and lanyard ring. For an extra ounce you get a lot more versatility.
-
I'm always hearing great things about the Wave and Charge. The Charge seems a little too expensive right now (probably looking at $80+, right?), so maybe if I find myself using this multitool a lot more then expected then maybe my wife will give me the green light on it later down the road lol!
I do like the way the Wave is sounding though, I'm just worried about the size and bulk.
Can anyone compare the Wave to something like the SwissTool Spirit? If I go with the Spirit, how much extra functionality will I be losing? How about the Spirit over the blast? Just from what I saw, the Spirit offers more tools then the Blast, but it also lighter?
At first I thought that I would need the ability to change the bits, but since 90% of what I do require a standard phillips and flat head, I should be ok without one. Also, what does that new Wave go for now a days?
It sounds like carrying these on a sheath is the best bet, but I don't want to rule out the option of pocket carry on certain days, and in that case, I'm wondering if the Spirit would be the better choice since it's a couple ounces lighter. Or is the difference so minimal I wouldn't be able to tell?
The Surge looks amazing, but man that thing is huge! :o
Edit
Here is a Spirit S on Amazon for $57, is that a good price?
Thanks again guys I really appreciate all of the help and info you've provided :)
-
In my limited knowledge I think a Skeletool would suit you :D
It has a good knife, pliers & screwdrivers and weighs very little; clip on and forget

Once you get that you are on the slippery slope to multitool bankruptcy :ahhh
:ahhh -
@Abe Arceo said:
Can anyone compare the Wave to something like the SwissTool Spirit? If I go with the Spirit, how much extra functionality will I be losing? How about the Spirit over the blast? Just from what I saw, the Spirit offers more tools then the Blast, but it also lighter?The Swisstool Spirit is a great tool, and very well made too, but the Wave/Charge have one thing that the Swisstool doesn't offer and this is outside, one-hand opening blades. The Charge TTi also offers a cutting hook on the serrated blade which is very convenient to have for safe cutting of wire, and string as well as opening boxes.
The Blast is a well made tool indeed, but the tool must be opened for access to all the blades and implements. The Blast is a good compact tool though.
If you can deal with having to use two hands to pull out a knife blade then I believe you would be well served with the Swisstool, and dare I say you will be impressed with how well it's built. If you often need to deploy a knife blade while you have your other hand occupied (i.e. holding something) then go with the Wave or Charge.
Buy them all. :)
-
I shopped on eBay for awhile and got a brand new Wave for $30. The wave is 4 inches closed. The spirit is slightly longer, but lighter, and doesn't have a pocket clip.
-
@Abe Arceo said:
As far as tools go, definitely pliers and a knife. Pliers really help out when there are paper jams in our printers and MFP's. Knife wouldn't be used for anything too crazy, we receive a lot of new equipments it will primarily be used for opening boxes and retail packages.I would like for the knife and other tools to be accessible without opening the multitool. Screwdrivers are a must, at least a philips and flathead. Optional bits are a plus but aren't necessary.
Thinking about it , the Skeletool would be ideal for that role . Its very light , rides really nice on its pocket clip and has a one handed blade .If you decide the other multitools have alot of tools you aren't going to use then this could be the model for you .
Dunc
-
I will second the recommendation of the Paladin PT-540, it has a really useful assortment of tools for electrical work, wire strippers 66 & 110 punchdowns, etc. And it is made by SOG so it is really high quality and customizable. It is big though being one of the largest multitools, but I have never found that to be a massive issue.
-
I can definitely see me buying a few multitools throughout the year. My two squirts haven't even come in yet and I still feel I need a bigger multitool lol!
The Skeletool was actually the first multitool that I looked at and was really close to pulling the trigger. But after some consideration I felt that that for the price I could get a multitool with more functionality and only weighing 1 extra ounce. Five ounces would be nice but if I could pack in a few extra tools and get more functionality I'd be ok with going up to 6!
I do like the idea of having one handed opening blades. That's something that I didn't consider before so thanks for pointing that out. And I do like the fact that the wave/charge have the pocket clip option.
Crouton - thanks for pointing out that the Blast must be opened to access the blades and implements. Having outside access is very important so I'll have to remove the Blast from contention!
So right now it looks like the Spirit, Wave, and Charge are the tools to choose from. Unfortunately the Charge seems to be out of the price range :(
As far as blades/implements go, does the Wave have any advantages over the spirit? Also, does anyone know the actual weight of the spirit s? I believe I read somewhere that the Spirit was a little under 6oz, I wasn't sure if the Spirit S changed that.
Thanks!!
-
Abe, check your PM :)
-
The only thing I feel the Wave lacks is a Awl which the Spirit does have . I have both tools and hold them in the highest regard . I think it boils down to one handed opening . Don't worry too much about the Charge , its very similar to the Wave but just uses High end material .One thing I like about the Waves sheath is it can be worn in the horizontal position and has two little pockets in it . I keep a pen in one and a little flashlight in the other .
Dunc
-
@Abe Arceo said:
The Skeletool was actually the first multitool that I looked at and was really close to pulling the trigger. But after some consideration I felt that that for the price I could get a multitool with more functionality and only weighing 1 extra ounce.I felt the same about the Skeletool at first; for about the same money you can get a more 'fuller' multitool. Now I have had my winning combination of Squirt and Wave I think the Skeletool might make a welcome addition.
You should keep an eye on the Multitools For Sale Section :D
-
Also don't forget to look on http://www.edcsource.com/
Dunc
-
Quick question guys - can anyone comment on the difference between the pliers on the Wave and Spirit? It seems that the Wave has needle nose where as the Spirit doesn't?
Also, if you carry your Wave on your belt in the sheath, is the weight noticeable?
Thanks again!
-
@Abe Arceo said:
Quick question guys - can anyone comment on the difference between the pliers on the Wave and Spirit? It seems that the Wave has needle nose where as the Spirit doesn't?Also, if you carry your Wave on your belt in the sheath, is the weight noticeable?
Thanks again!
I don't notice the Wave there at all on my hip . The pliers on the wave do come to a finer point then the Spirit but I would consider both to be very good .Where the Wave does score points is the bigger wire cutting area which makes it easier when cutting lots of wire or if your in a hurry .Both Spirit and Wave cut wire well though .
I included a Skeletool for size as well . Let me know if you would like me to take anymore .





Dunc
-
Dunc,
Thanks for the pics man!
Between the Spirit and the Wave, can you really tell the difference in weight? I'm really considering sticking with sheath carrying rather than pocket carrying....
Also, it appears the Wave is a bit smaller in length compared to the Spirit, is that right?
I do like the fact that the sheath on the Wave can be in either the horizontal or vertical position...that actually might make a difference. My Blackberry holster is always in the vertical position which keeps it out of the way nicely.
-
@Abe Arceo said:
Dunc,Thanks for the pics man!
Between the Spirit and the Wave, can you really tell the difference in weight? I'm really considering sticking with sheath carrying rather than pocket carrying....
Sitting here with a Wave in one hand and a Spirit in the other I would say any difference isn't worth worrying about .The Skeletool you can notice . You would certainly notice a Spirit or a Wave in your pocket .I find the Spirit sits better in your pocket then the Wave as its thinner and more smooth . Which reminds me , the Spirit is probably the most comfortable multitool to use the pliers on .
-
[quote author=cerbera147 link=topic=16255.msg308133#msg308133 date=1262630099
Once you get that you are on the slippery slope to multitool bankruptcy :ahhh
:ahhh
[/quote]+1 i have a skeletool and a charge i EDC EVERYWHERE. my wave is for home repair. being an IT guy as well, i would tell you to go skeletool but you know not every IT guy runs the same. for the paper jams i come across hemostats fit the bill the best for me at least. why not look into getting a nite ize pock-its XL and carry a full size tool and a good AA LED light and a long bit(ed) screw driver that was linked above? that was my load out for the past year and a half at my job... besides when you get one tool, another always seems to come into the picture, and then another and another, and well i think you get where i'm going :ahhh let us know what you end up getting!!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login