New guy looking for some advice on first multitool!
-
@Abe Arceo said:
Dunc,Thanks for the pics man!
Between the Spirit and the Wave, can you really tell the difference in weight? I'm really considering sticking with sheath carrying rather than pocket carrying....
Sitting here with a Wave in one hand and a Spirit in the other I would say any difference isn't worth worrying about .The Skeletool you can notice . You would certainly notice a Spirit or a Wave in your pocket .I find the Spirit sits better in your pocket then the Wave as its thinner and more smooth . Which reminds me , the Spirit is probably the most comfortable multitool to use the pliers on .
-
[quote author=cerbera147 link=topic=16255.msg308133#msg308133 date=1262630099
Once you get that you are on the slippery slope to multitool bankruptcy :ahhh
:ahhh
[/quote]+1 i have a skeletool and a charge i EDC EVERYWHERE. my wave is for home repair. being an IT guy as well, i would tell you to go skeletool but you know not every IT guy runs the same. for the paper jams i come across hemostats fit the bill the best for me at least. why not look into getting a nite ize pock-its XL and carry a full size tool and a good AA LED light and a long bit(ed) screw driver that was linked above? that was my load out for the past year and a half at my job... besides when you get one tool, another always seems to come into the picture, and then another and another, and well i think you get where i'm going :ahhh let us know what you end up getting!!!!
-
Thanks for the photos from me too Dunc

I was going to ask someone to compare the Wave and the Skeletool :D
Would it possible to to see all 3 stacked to compare thickness? If there is not much in it then it doesn't matter.
-
I think Dunc's gone to bed, so you'll have to make do with me ;)
The lighting's crap, and getting the tools to stand up was hard

But here you go:


Basically, there's not a lot in it.
-
if you are between the wave and the spirit, just ask your self, do you want all of your tools to be opened outside (spirit) or have OHO blades (wave)? i was in your boat and was looking at both. i was leaning to the spirit but ended up with the wave thanks to a gift card from my dad
-
For you id say the charge isn't worth it. Its a wave with fancy metals that you don't really need.
Skeletool is a decent option but considering ur job u may find it lacking when u really need it.
Spirit is a lot more pocketable and overall has more onboard features than the wave. Its a tad lighter, but its the thinness that really makes it disappear into your pocket. I really think the spirit would be better for you (I've owned both a spirit and wave) unless you really want the one handed blades. Keep in mind though, universities tend to be chock full of sheeple that may get freaked out when you snap open the Wave's more agressive blades. People don't think twice about the spirit's "swiss army blade" also the stubby bit drivers on the wave may be a problem working in tight places like the inside of a copier or what have you. Id also take a 2nd look at the cybertool. I love mine for working on computers and electronics. I actually find the tiny pliers indespensible for manipulating small objects or getting into tight places, and the bit driver is a godsend. I used my cybertool to rebuild my Nintendo DSi. Something none of my other multis could do. For small work it's an indespensible tool. As has been mentioned, if you don't mind taking the hour it takes to get at the tools, the paladin is another decent option. -
Thanks for the pics Dave

Good to see the comparison :D
-
@thebullfrog said:
For you id say the charge isn't worth it. Its a wave with fancy metals that you don't really need.
Skeletool is a decent option but considering ur job u may find it lacking when u really need it.
Spirit is a lot more pocketable and overall has more onboard features than the wave. Its a tad lighter, but its the thinness that really makes it disappear into your pocket. I really think the spirit would be better for you (I've owned both a spirit and wave) unless you really want the one handed blades. Keep in mind though, universities tend to be chock full of sheeple that may get freaked out when you snap open the Wave's more agressive blades. People don't think twice about the spirit's "swiss army blade" also the stubby bit drivers on the wave may be a problem working in tight places like the inside of a copier or what have you. Id also take a 2nd look at the cybertool. I love mine for working on computers and electronics. I actually find the tiny pliers indespensible for manipulating small objects or getting into tight places, and the bit driver is a godsend. I used my cybertool to rebuild my Nintendo DSi. Something none of my other multis could do. For small work it's an indespensible tool. As has been mentioned, if you don't mind taking the hour it takes to get at the tools, the paladin is another decent option.You make a great point about how the Wave might not be as friendly/welcoming as the Spirit due to the aggressive blades - that's something that I didn't think about it and actually makes a strong case in favor of the Spirit. I love the idea of the OHO blades (look at me learning the lingo), but it may cause a few people a bit of a concern. I work in the Enrollment Management department, so the offices I tend to are actually pretty high level, so they may not be too keen on the aggressive blades of the Wave. The Spirit looks pretty elegant and may not draw too much attention.
I do like the idea of the Cybertool, I'll do more research into that later, but I did receive my Leatherman Squirt P4 and S4 last night and I absolutely love them! I was able to unbox, break down the box, and put a MFP together this morning just using the blade on the Squirt P4.
I've also noticed there is a Spirit Plus with the Ratchet Tool. Any comments on that?
Also, what is the average price of a Spirit? I see that Amazon has them for just under $60, is that pretty standard?
And last question - what is the actual size of a Spirit or Spirit S? The official size says 5 and 3/4 oz, but I read some reviews saying it was somewhere in the 7.4 oz range. That's a pretty big difference...is it a case of older vs. newer model?
Thanks!
-
Im sure there isn't much of a difference in weight between the Spirit and the Spirit S. Not enough to notice it anyway. I don't know the actua weight, but it is really light and unnoticable in my pocket. I wouldn't be overly concerned there. While I haven't personally tried one, I have heard good things about the mini ratchet, but if your already concerned about weight keep in mind it is one more thing to lug around. Tho it can be a bit trickier to find in stock and usually costs a few $ more have you considered the Spirit X? It replaces the serrated "butter knife" with scissors. Don't get me wrong, the Wave is a great tool, and I carried one every day for a couple years, I just think the Spirit would probably suit you better.
-
Abe if you haven't already read the Spirit owners thread then you may want to take a look :D......
/topic/9743
Dunc
-
Dunc - Looking through it now! Definitely appreciate all the pics...I'm looking more into the Black Oxide Spirit now - I believe it's the cheapest on Amazon right now.
If I do go with the Spirit, I am torn a bit between the X and the S. Is the only difference the scissors? Both have a knife, right? Here is the the Black Oxide Spirit S that I am looking at on Amazon.
I do like both finishes, I'm kinda worried the B.O. will wear off in time though.
-
@Abe Arceo said:
Dunc - Looking through it now! Definitely appreciate all the pics...I'm looking more into the Black Oxide Spirit now - I believe it's the cheapest on Amazon right now.If I do go with the Spirit, I am torn a bit between the X and the S. Is the only difference the scissors? Both have a knife, right? Here is the the Black Oxide Spirit S that I am looking at on Amazon.
I do like both finishes, I'm kinda worried the B.O. will wear off in time though.
The black one is only available in the "S" model which has two knife blades and no Scissors . There is another model black spirit but its harder to get hold of and much more expensive , I believe its a military run :think: The X has scissors and a plain edge blade . The Std has a blunt tip serrated blade and the S has both blades but no scissors . I love my Black Spirit and at first a little of the black comes off on your hands ( its not that bad honest ) and as time goes by it gets a lovely worn smokey like finish . It does scratch easily though .
Dunc
-
Dunc beat me to it.
One other thought about the BO version though would be the sheeple factor again. People find the "gentlemanly" shinyness a lot less offensive and disarming than "tactical" looking black.
-
I actually see the BO as being less visible when in use. It just sort of blends in, whereas the shiny finish really stands out.
-
Which is actually my point. In my experience when people see you using a black "knife" they tend to think you want it to blend in and tend to get nervous about it. Having it uber shiny and obvious seems to put the sheeple I've encountered more at ease. They don't hink ur trying to hide something. Plus I tend to get a lot of "oh that's kinda like the swiss army knife my grandpa always used" as opposed to " why do you carry such a scary looking knife?" that I would often get with my BO powerlock, not to mention the occasional look of horror when I'd open the blade on any of my leathermans.
-
@thebullfrog said:
Which is actually my point. In my experience when people see you using a black "knife" they tend to think you want it to blend in and tend to get nervous about it. Having it uber shiny and obvious seems to put the sheeple I've encountered more at ease. They don't hink ur trying to hide something. Plus I tend to get a lot of "oh that's kinda like the swiss army knife my grandpa always used" as opposed to " why do you carry such a scary looking knife?"I can see that happening here at the university. I think the shiny silver looks is a bit more welcoming and may bring up some small talk/chit chat (although, I wanted the BO when I was first looking into the Spirit)
I did think about going with the Gerber Crucial at one point, but I didn't want it to draw too much attention or startle people - plus I didn't want to be left wanting the extra tools from the Wave or Spirit.
-
I wouldn't mind getting a BO version myself one day as it does look super nice, but wouldn't feel as comfortable using it in public. Working in retail I've had a lot of opportunity to see a lot of people's reactions (coworkers, customers, bosses) to different styles of tools, and by far the most disarming seems to be the spirit. something about the color black just seems to unnerve certain kinds of people. The same kind of people I imagine working as admins in a university.
-
@thebullfrog said:
I wouldn't mind getting a BO version myself one day as it does look super nice, but wouldn't feel as comfortable using it in public. Working in retail I've had a lot of opportunity to see a lot of people's reactions (coworkers, customers, bosses) to different styles of tools, and by far the most disarming seems to be the spirit. something about the color black just seems to unnerve certain kinds of people. The same kind of people I imagine working as admins in a university.Good call. I work very closely with different directors (financial aid, registrar, etc), and from the sounds of it the Spirit won't make them as uneasy as something like the Wave would, especially when I need to take out the knife implement. Definitely don't want to send the wrong message, especially to that audience :)
-
Yeah, they're not generally the most "outdoorsy wilderness" type of people lol. The Wave has it's advantages but people get skittish about that blade which looks like a sword next to the Spirit. And while having a bit driver can really save the day, not being able to fit the stubby driver into most deep recesses may prove a serious problem for you.
-
@thebullfrog said:
Yeah, they're not generally the most "outdoorsy wilderness" type of people lol. The Wave has it's advantages but people get skittish about that blade which looks like a sword next to the Spirit. And while having a bit driver can really save the day, not being able to fit the stubby driver into most deep recesses may prove a serious problem for you.That is a great point about the stubby driver on the Wave. I'll be accessing some pretty tight spaces, so for that, is the Spirit better equipped? The idea of having changeable bits is definitely appealing, but that also means that I would have to carry around the spare bits, which I probably won't be doing. And if I'm at my desk/tech bench or at home I have plenty of tools that take multiple bit drivers.
I'll also have my Squirt P4 in my pocket or on my keyring, so I'll have those "mini" tools at my disposal as well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login