What Did You Use Your Multitool For Today?
-
Just had to pull apart my daughter's alarm clock, she had unscrewed the little legs and so there was a couple of nuts rattling around inside and nothing to screw the legs back into. ::)
-
But most importantly, which tool did you use?
-
@thebullfrog said:
But most importantly, which tool did you use?Oh good question, I used a LM Flare. :)
-
But most importantly, which tool did you use?
Oh good question, I used a LM Flare. :)
You have one too. :ahhh
-
Used my hands to switch a light bulb :D
-
-
Used a Charge to work on my crampons. Was experimenting with extending the frontpoints. Cut a couple of Aluminum spacers with the metal saw. Then removed the bolt with the Allen wrench (4mm)
The experiment was a failure, but it was unrelated to the Charge.
-
used the blade on my commander to remove the extensive packaging on one of the kids toys , :-\
paul
-
The screen on my phone suddenly stopped working. I could see it was just a loose connection in the flip hinge mechanism (it's a Sidekick - Hiptop for you foreigners). Used the CT34 to take the screen off and tighten down the screws on the back of the flip screen hinge that had worked their way loose. I didn't have a Torx small enough, but the eyeglass driver did the job fantastically. Works perfectly now.
-
Used the Swiss Champ and Explorer to replace a broken door knob today. Used the file on the Swiss Champ to file down a rough patch where the latch was sticking when the knob turned and the explorer to tighten all the screws. Worked like a charm.
-
LM wave Phillips screw driver, fixed a lock :D
-
Used my LM Juice Xe6 to pull a stubborn toothpick out of my turkey-bacon-triple-decker club sandwich, over at the Marlton Diner, 1 hour ago!!

-
I fixed the girls duck game this am, it wasnt turning around, all fixed now, sadly i think i accidentally broke a wire off of the speaker and now there is no annoying duck song ::)

paul

-
-
-
lol, yeah really i just slipped,
now what else can i take apart, there is a toy baby that is a little to noisy >:Dhhmm swamp land sounds interesting, this could be our stag world
we could all roam free and catch ducks , :D quot johnny vorn on top gear
i added the duck part ;)
paul -
If I hadn't carried my MT today, I would have needed to call a tow truck($75~125), go to the closest Western Auto/Auto Zone and pay ($50+) for the repair.
Torrential rains have hit my island 24 hrs for the last 3 days! Tow trucks are scarce since so many cars are failing from the floods and the mechanic shops are backed up from the same thing.
Soooo.....
My upper radiator hose broke right near the "C" clamp and the car overheated.
<u>**Leatherman Wave
**</u>
Serrated Knife - Cutting 1" off the heavy gauge cord reinforced radiator hose.Needlenose Pliers - Removing the spring clamp
Large Flat Screwdriver/Pry tool - Scraping the gunked off piece of broken hose off of the radiator.
Needlenose Pliers - Re-fastening the clamp.
Main Pliers - Opening the air valve(bolt) of the coolant system to allow topping-up a completely drained system with strained(with a spare sock) water. We were calf deep in flood water so water was easy to come by.

-
Good job mate.

-
ACHË, your story would make Tim Leatherman proud

That is where he came up with the idea, car troubles :D
You should send your story to their website.
-
@ACHË said:
If I hadn't carried my MT today, I would have needed to call a tow truck($75~125), go to the closest Western Auto/Auto Zone and pay ($50+) for the repair.Torrential rains have hit my island 24 hrs for the last 3 days! Tow trucks are scarce since so many cars are failing from the floods and the mechanic shops are backed up from the same thing.
Soooo.....
My upper radiator hose broke right near the "C" clamp and the car overheated.
<u>**Leatherman Wave
**</u>
Serrated Knife - Cutting 1" off the heavy gauge cord reinforced radiator hose.Needlenose Pliers - Removing the spring clamp
Large Flat Screwdriver/Pry tool - Scraping the gunked off piece of broken hose off of the radiator.
Needlenose Pliers - Re-fastening the clamp.
Main Pliers - Opening the air valve(bolt) of the coolant system to allow topping-up a completely drained system with strained(with a spare sock) water. We were calf deep in flood water so water was easy to come by.

Thats exactly what multitools are for :D Great story and nice to see the Wave done a good job , thanks for sharing
and you really must send the story to Leatherman .Dunc
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login