Paladin PT-540
-
@Roadie said:
Yes but you are not going to like the price
Only place i've found it so far, could be one somewhere else but i haven't found it yet 
http://uk.farnell.com/paladin-tools/6510/multi-tool/dp/1421889Thanks for the link, looked up if there was a Swedish division and found this: http://se.farnell.com/paladin-tools/6510/multi-tool/dp/1421889
2072.7 SEK (kr) = $235.94 = ยฃ166.38 = a tad much

Still, getting closer heh...
-
-
-
-
-
Looks like a damn good tool to me, and yeah it's a SOG, customizable and all.
The cost of getting one, not the price on the MT itself is what's holding me back.And regarding the size, I don't really see any drawbacks other than the volume it occupies wherever I might carry it when not using it, and to me that's not reason enough to put it aside.
-
They make smaller versions of it.
-
How does the 525 compare with the 540?
It looks as though it doesn't have the wire stripper on the head, but it's hard to tell from the photos on the web.
-
for a long time I was really keen to finding me one of these (thing which held me back most was the limited availability and obscene price in the UK).
But that aside, if this had outside opening tools, I would probably have to get one (swapping out the electrician specific tools for more everyday ones of course).
Such a shame SOG continues with their all inside tools and silly handle flaps.
-
@Raukodur said:
for a long time I was really keen to finding me one of these (thing which held me back most was the limited availability and obscene price in the UK).But that aside, if this had outside opening tools, I would probably have to get one (swapping out the electrician specific tools for more everyday ones of course).
Such a shame SOG continues with their all inside tools and silly handle flaps.
Indeed.

(here's hoping for a Paladin PT-560 PowerAssist next year!)

-
-
@Raukodur said:
for a long time I was really keen to finding me one of these (thing which held me back most was the limited availability and obscene price in the UK).they can be had for less than ยฃ100 on some sites in the UK, farnell tend to be expensive for this kind of thing.
@jzmtl said:
I thought vic/bear has a patent on that so others can't use it? -
Indeed, it seems you can get it for ยฃ97 here:
http://www.markertek.co.uk/ProductDetails.asp?ProductCode=PAL-PT540
BUT, that is still an exorbitant amount IMO. ยฃ75 would be the upper limit I would be willing to pay, maybe that is unrealistic.
-
Bob, how does the tool compare to your other tools you may consider to EDC? As I have mentioned before, if I was to get one, I would swap out the electrician specific tools for more general ones.
How do you find the all inside tools, especially with the flappy panels, compared to e.g. the spirit or swisstool all outside tools, of the LM wave/charge/surge partially outside opening tools config?
-
-
@Raukodur said:
Indeed, it seems you can get it for ยฃ97 here:http://www.markertek.co.uk/ProductDetails.asp?ProductCode=PAL-PT540
BUT, that is still an exorbitant amount IMO. ยฃ75 would be the upper limit I would be willing to pay, maybe that is unrealistic.
I think it costs so much because it is such a speSmurfpillsed, high quality tool. A Venn diagram of "network installers" and "people who carry multi-tools" probably doesn't have a great overlap.
-
@Raukodur said:
Bob, how does the tool compare to your other tools you may consider to EDC? As I have mentioned before, if I was to get one, I would swap out the electrician specific tools for more general ones.How do you find the all inside tools, especially with the flappy panels, compared to e.g. the spirit or swisstool all outside tools, of the LM wave/charge/surge partially outside opening tools config?
Overall build quality is top notch, but it would never be a good EDC for me.
The monstrous overall size is an immediate deal killer, as I prefer a less conspicuous carry tool. (A professional tradesman who used a tool hard throughout the day might feel differently of course)Deal killer #2 for me applies to all SOG PowerLocks as well: The Flappers.
Set aside for the moment how clumsy they are and the extra steps required every time an implement is needed. Instead just consider how the very presence of flappers on SOG tools forces all four outside "long" blades to be nearly one half inch shorter than they would otherwise need to be. (the blades have to be short in order to fold clear of the flapper pivot point)The PT-540 for instance, a great big strapping brute of a tool, still comes with four outside blades that are shorter than those of physically smaller models like the Vic SwissTool or the Leatherman Core. Even much smaller multitools like your Charge have bigger knives than the PT-540. All because of the flappers. ::)
If I'm going to carry a big tool, I expect it should have big blades.

-
Excellent short review there!
SOG need to change it to an all outside opening tool, like a swisstool / spirit, and that would allow them to put in some huge tools to match the size of the beast. And of course do away with those flappy paddles and make it much more elegant to use.
-
-
@JAfromMn said:
I'm bumping this old topicI'm going after a 540
wish me luck
I really want to try one of these.
I may do some tool swapping and make my dream sog work tool.
If you happen to find two (at a reasonable price, say less than $US 80) please let me know

Also I have some spare SOG tool components which may help with your tool swapping.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better ๐
Register Login