Paul Chen Multi Tasker worth getting ?
-
if you google them, a lot of people give them terrible reviews. maybe that is why Fiskars didn't brand them as gerber?

-
this was one I found: http://www.britishblades.com/forums/showthread.php?10267-Paul-Chen-Multi-Tasker/page2
It looks EXACTLY like someone in a fourth form metal work class was given a few old multitools and SAKs and told to build something out of the bits. In half an hour. The different tools are all different colours and presumably types of steel, the can and bottle opener are at half SAK scale. The shears seem OK, but the pliers tacked on the side would be pretty much useless. The blade is not impressive. The worst thing though? I opened the file and it came off in my hand. When I reinserted it and reopened it it bent back a piece of the frame with an audible click.
if you google them, a lot of people give them terrible reviews. maybe that is why Fiskars didn't brand them as gerber?

Why did they with the Suspension, Ripstop, and so on, then? >.>;
my point exactly, if they thought this tool could ruin gerber's name...
-
@Magnus said:
this was one I found: http://www.britishblades.com/forums/showthread.php?10267-Paul-Chen-Multi-Tasker/page2It looks EXACTLY like someone in a fourth form metal work class was given a few old multitools and SAKs and told to build something out of the bits. In half an hour. The different tools are all different colours and presumably types of steel, the can and bottle opener are at half SAK scale. The shears seem OK, but the pliers tacked on the side would be pretty much useless. The blade is not impressive. The worst thing though? I opened the file and it came off in my hand. When I reinserted it and reopened it it bent back a piece of the frame with an audible click.
if you google them, a lot of people give them terrible reviews. maybe that is why Fiskars didn't brand them as gerber?

Why did they with the Suspension, Ripstop, and so on, then? >.>;
my point exactly, if they thought this tool could ruin gerber's name...
so is it basically a unbranded gerber ? its got similar looks other than the shears , ???
paul
-
For the price, pick one up.
I have the Paul Chen model. It is definitely unique. The scissors/shears are worth the price of entry, and that price is the best thing going for it.
I think you will find though that what everyone has said about it in this thread is absolutely right.
If you can EDC one, you are a lot tougher then I am. I view it strictly as a collector item.
-
I was hoping my Paul Chen could act like a light duty pruner , it aint that :(. But HEAVY duty scissors it is , I have used the PC MT too cut my puppy's chewing hide treats in half(they are bloody tough too cut, the PC excelled at this). For the $ they are asking they are a bargain oddity

-
Chako i dont think this will be a EDC but a in my tool box type of MT
mat its the oddity bit about it i like, :D
-
I was once tempted, but after seeing the complete pliers afterthought I changed my mind. :D
-
well for £9.99 i just ordered one, im looking forward to seeing it, i know its got mixed reviews but i like a underdog, ;)
paul
-
@zed6309 said:
I was once tempted, but after seeing the complete pliers afterthought I changed my mind. :D
i was thinking that this could be the base of a bit of modding, i will probably remove those little pliers, will have to see,
paul
Don't worry buddy, after a couple of uses they will probably remove themselves

I jest really. Look forward to hearing your thoughts.

-
@zed6309 said:
I was once tempted, but after seeing the complete pliers afterthought I changed my mind. :D
i was thinking that this could be the base of a bit of modding, i will probably remove those little pliers, will have to see,
paul
Don't worry buddy, after a couple of uses they will probably remove themselves

I jest really. Look forward to hearing your thoughts.

i recon so, we will see,now i wonder if it still comes with a lifetime warranty ::)
check out the original packaging

http://www.multitool.org/wiki/tiki-index.php?page=Multi-Snip -
@zed6309 said:
i was thinking that this could be the base of a bit of modding, i will probably remove those little pliers, will have to see,
paul
I think if you decide to mod some tools this one could work well :D
For £10 you can't go too wrong; it may be a collectors item someday ;)
probably not if i mod it

-
Paul if you want odd you will not be disappointed :P :D
You really need to consider the wee Schrade Navitool , if you like odd :P


Next to a Charge :oOr how about the Wenger Business Tool :D :D
-
I gotta see the Navitool in person one of these days, it just looks the most unwieldy thing ever. :)
-
now mat that is odd :o looks cross between a hand grenade and a SAK
kind of like it though, :D -
I was going to say that the Schrade Navitool looks like a handy thing until I saw the next photo of it beside a Charge

-
I snagged a Paul Chen Multi Tasker for $25 off of eBay. The quality control is suspect on these. The first one I got had a bent and bowed handle. It was still new in the packaging, so it was obviously a manufacturer's defect. I sent it back and got a replacement. On this one the handles were fine, but the saw had a bend in the center. Not enough to be a big deal, but it's got a little tweak to it. I'm wondering if the guy selling these is selling factory seconds. They all come in a plain brown box, instead of clamshell or branded packaging.
At any rate, I'm finding it to be quite a useful tool. I was messing with drywall yesterday, and was absolutely LOVING the OHO blade and pocket clip. It made scoring drywall seams easy peasy. The saw worked well enough cutting through both wood and drywall. I used the phillips and flat drivers a couple of times, and had no qualms there. They work just as well as any Gerber driver. The file works well, and I do like that it is removable. The shears worked just fine cutting metal corner edging. Better than the Outu multitool with shears.
Now, these suck as pruners. They just don't work well for that at all. Branches, even small ones, tend to slide right out. The Brookstone shears multi tool is a lot better pruning multitool. (Also sold as the Gentleman's Hardware "Nip it in the Bud" 4-in-1 garden tool, for about $40)
The saw is not as aggressive as the Gerber Diesel saw. It has a higher tooth count, and thus doesn't cut wood as quickly. Still, it made through a 1" diameter tree branch... eventually. The Diesel saw blade is thicker at the teeth than at the top, which means as it cuts the kerf is always wider, and the blade doesn't get stuck. No such luck with this saw, there is no taper, so it does tend to want to stick more... but not as much as I expected, actually. It made the cut without a lot of effort, it just took a bit longer than I'd have liked. The higher tooth count means it might cut plastic better than wood.
The file is not as coarse as the file in an MP600, but it does work very well. It is sharp and aggressive, just not as aggressive as the MP600 file. I like that it's removable, and it can be slotted in and held at 90 degrees to the tool, if you need to hold it in something solid. It only comes out if given a really hard bash. Like, drop off a table onto hardwood and land just right, and the file will come out. If you press it in all the way it won't, though.
The drivers and can opener work well, no complaints there. They're non-locking, and similar to the original Gerber Multiplier tools - but a dash shorter. There is a space for one additional tool, currently taken up by washers. I haven't had the tool apart yet, but I'm guessing a Gerber flat driver or lanyard loop would fit in there, hopefully without any mods.
The pliers are a joke. First, if they get slightly damp they'll start rusting almost immediately. Second, they're made out of some sort of cheese. They bend very, very easily, and are not even adequate to bend one of the crappy thin metal clothes hangers they give you when you pick up your clothes from a tailor or dry cleaning place. The pliers will twist and then you'll have to bend them back into place.They're useless as anything except oversized tweezers. It would be a better tool without the pliers at all, but the way they're mounted means something has to be there, or the handle is incomplete.
Overall I really like the tool. It's not perfect, but it works well as shears and the OHO blade is extremely useful, as is the saw and file.
I see people swapping MP600 jaws into them, and I like that idea, except for the extraneous pliers hanging off the side. I'm thinking that it'd be slick to find a way to mount a Leatherman screwdriver holder there, and use the long flat bits. But then the internal drivers would be a little redundant. Besides, the Leatherman driver rotates the wrong way, and I don't see a way of making it work. It'd have to be welded, machined, and drilled to work.
Anyhow, I like this tool for what it is -- shears. I like the OHO blade and the saw and the file quite a bit. The internal tools are too short, but otherwise work well. Quality control is a bit suspect, it's definitely not on par with the MP600... but it's not bad either.
Charles.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login