What Did You Use Your Multitool For Today?
-
Good job mate.

-
ACHË, your story would make Tim Leatherman proud

That is where he came up with the idea, car troubles :D
You should send your story to their website.
-
@ACHË said:
If I hadn't carried my MT today, I would have needed to call a tow truck($75~125), go to the closest Western Auto/Auto Zone and pay ($50+) for the repair.Torrential rains have hit my island 24 hrs for the last 3 days! Tow trucks are scarce since so many cars are failing from the floods and the mechanic shops are backed up from the same thing.
Soooo.....
My upper radiator hose broke right near the "C" clamp and the car overheated.
<u>**Leatherman Wave
**</u>
Serrated Knife - Cutting 1" off the heavy gauge cord reinforced radiator hose.Needlenose Pliers - Removing the spring clamp
Large Flat Screwdriver/Pry tool - Scraping the gunked off piece of broken hose off of the radiator.
Needlenose Pliers - Re-fastening the clamp.
Main Pliers - Opening the air valve(bolt) of the coolant system to allow topping-up a completely drained system with strained(with a spare sock) water. We were calf deep in flood water so water was easy to come by.

Thats exactly what multitools are for :D Great story and nice to see the Wave done a good job , thanks for sharing
and you really must send the story to Leatherman .Dunc
-
Kick today ,used Phillips to remove plastic gutter covers , and the flat head to replace a few door plates,the wave stayed in my pocket holder, ahh bless :D
-
@ACHË said:
If I hadn't carried my MT today, I would have needed to call a tow truck($75~125), go to the closest Western Auto/Auto Zone and pay ($50+) for the repair.Torrential rains have hit my island 24 hrs for the last 3 days! Tow trucks are scarce since so many cars are failing from the floods and the mechanic shops are backed up from the same thing.
Soooo.....
My upper radiator hose broke right near the "C" clamp and the car overheated.
<u>**Leatherman Wave
**</u>
Serrated Knife - Cutting 1" off the heavy gauge cord reinforced radiator hose.Needlenose Pliers - Removing the spring clamp
Large Flat Screwdriver/Pry tool - Scraping the gunked off piece of broken hose off of the radiator.
Needlenose Pliers - Re-fastening the clamp.
Main Pliers - Opening the air valve(bolt) of the coolant system to allow topping-up a completely drained system with strained(with a spare sock) water. We were calf deep in flood water so water was easy to come by.


Score MT:1 Entropy of the Universe: 0
-
ACHË -

-
Fixed an itermitent stove element ( used Spirit file to remove crud , bent spring retention clips back into shape ). It also assisted me in a minor repair to a clothes drier . My Alox Soldier opened several tins of cat food .
Chris
-
Punched a hole in my Capri Sun juice pouch and cut a flap off a Pepsi box. Neither very big, but DAAAANG life is much simpler when you have a blade on you.
-
Gerber 600 was the choice today for ease of plier head extraction. Amateur Radio activities saw
wires fed into a tuner and the file was used to grind down a contact on a Morse Code key. Worked
well.
-
Mine opened cat food cans , and sawed a stick to fix a fridge shelf .
Chris
-
Just used my Skeketool to tighten up my Daughters pair of compass's so she could do her maths homework .
And the knife blade to sharpen her pencil .Dunc
-
Used my Stanley 12 in 1 to repair a bag sealer.
-
Actually a list of things I did over the last couple days since I haven't been able to get on here:
Tore apart and fixed a computer for a friend's Mom.
Stripped down my Girlfriend's old computer and swapped some of the parts into the new one I built her.
Took care of a couple loose cabinets in the kitchen that have been driving me nuts.
Tore down and re-assembled the vacuum cleaner.
Tightened an annoying loose shifter on a friend's car (it was bugging the crap outta me from the passenger seat so I fixed it when they were pumping gas lol)
Took apart a friend's old bed frame.
Cut open and broke down some boxes from IKEA.
Built a new bed frame that was in those boxes.
Cut my fingernails.
Everything was done with my Swisstool X. Performed every job perfectly. On the bed frame projects I kinda found myself wishing I had the plus kit though. May have to hit up Tim for one of those one of these days. Also, while building the new frame, we had to torque the screwdriver really damn hard seeing as the holes were all drilled a bit too small. Even turning the thing so hard it hurt, the driver never really slipped, even when she was using it and she has slightly arthritic hands. On one of the computer projects I had to use the pliers for some small work, and surprisingly the stubby plier head worked a lot better than I would have expected for the task. I'd say the Swisstool has proven itself pretty well the last couple days

-
Good post you have been busy :D Yeh you can always depend on a Swisstool

dunc
-
Yep. And I've gotten a few positive comments about it too. A lot more than I've ever gotten about any of my Leathermans ;) What can I say, sheeple love the Swiss :D
-
Re-affixed my front license plate that was falling off. One of the screws had decided it was time to head off on it's own apparently. Not a big task, but hey, Swisstool to the rescue once again.
-
Not actually today, but last Wednesday used a PST to swap some fuses about in the car, as the heating / AC blowers had stopped working on the way to a foorball match and we couldn't see where we were going. I did try with the Swisstool that lives under the dash, right by the fusebox, but the pliers were too fat to get in between the rows of fuses!
It was dark and wet and cold, so I was grateful for the PST in my laptop bag as I'd left it in there having rushed from work, otherwise we may still be on that car park now!
-
Used the blade on one of my Wenger Rangers to cut some plastic to cover my passenger side front window of my care that was broken into! >:(
Personally, I want to use that same blade for when I find that thief! So I can strangle him with his own intestines!!!!!

-
Used my skele and vic spirit with the ratchet and 2 # 10 torx bits to take apart two used Bear MTs for spare parts, going to build myself a new one :D Right now the parts are soaking in WD-40.
-
used my PT-540 to weave part of my chainmaille shirt
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login