2010 SHOT Show- CRKT Booth
-
Yes, it is another piece and the screw to hold it in is yet another! When talking to the designer, he mentioned that he'd planned to actually fit the pocket clip into the design, by adding a long strip of metal to the end of the handle and folding it over, but for some reason (I can't remember why) they went with the screwed on version. If Bob doesn't remember why they went this route I'll check with the designer again and see if I can convince him to repeat it! :D
Def
-
@Grant Lamontagne said:
Yes, it is another piece and the screw to hold it in is yet another! When talking to the designer, he mentioned that he'd planned to actually fit the pocket clip into the design, by adding a long strip of metal to the end of the handle and folding it over, but for some reason (I can't remember why) they went with the screwed on version. If Bob doesn't remember why they went this route I'll check with the designer again and see if I can convince him to repeat it! :DDef
So you can tighten the pivot if you should want to? Or remove the clip? :D
-
The clip would be permanent if done that way, and that might be part of it, but since the clip would simply be an extra strip of metal, it could be placed pretty well anywhere.
Def
-
you know, depending on how it is balanced, that Ta-Bar looks like it would make a good bo-shuriken.

-
Love the look of the NIRK
Never had a CRKT before but that may now change .Dunc
-
Same here. Really interesting design.
-
I would actually get one, and really plan on making that the top of the list. It is unusual and different and really pushes the envelope on design. Gerber you watching?
-

Overall from what I have seen in person from the Flux is that it's a rather well thought out piece. If the Flux was never released beyond the basic set (knife module and driver module) the idea would fizzle rather quickly, the main thing the Flux has going for it is that it is a platform for all kinds of expansion. It's kind of like a radical twist on the Coleman Pro-Lock. The Flux and it's success relies solely on the sum of it's parts, if they can keep up with demand and even release some new modules now and then it might stand a good chance. I think CRKT/ ID Works creates some fantastic designs and this is something so radical it could work. I am not too fond of the smallish nature of the main blade or maybe the fact that everything is bead blasted (god I love shiny metal) but it's got lots of potential and I cannot wait to try one out. When I EDC multitools I rarely have need for pliers, I am more knife and driver based than most folks and it just works for me. Just the Flux "basic" set is enough to fill that need and would give me other ways to expand if I chose to do so. Hey CRKT, you can drop one off anytime....

-
Overall from what I have seen in person from the Flux is that it's a rather well thought out piece. If the Flux was never released beyond the basic set (knife module and driver module) the idea would fizzle rather quickly, the main thing the Flux has going for it is that it is a platform for all kinds of expansion. It's kind of like a radical twist on the Coleman Pro-Lock. The Flux and it's success relies solely on the sum of it's parts, if they can keep up with demand and even release some new modules now and then it might stand a good chance. I think CRKT/ ID Works creates some fantastic designs and this is something so radical it could work. I am not too fond of the smallish nature of the main blade or maybe the fact that everything is bead blasted (god I love shiny metal) but it's got lots of potential and I cannot wait to try one out. When I EDC multitools I rarely have need for pliers, I am more knife and driver based than most folks and it just works for me. Just the Flux "basic" set is enough to fill that need and would give me other ways to expand if I chose to do so. Hey CRKT, you can drop one off anytime....

Did they have a version where the middle piece was a pair of pliers?
-
No they didn't, but due to the way this tool is put together anything is possible for future ideas.
-
@trickknife said:
Did they have a version where the middle piece was a pair of pliers?Oooh, that's a good idea! You mean like a pair of pliers with a T-rail for one of the other modules to click into right? So the plier (or wrench!) would just take the place of the carabiner rail piece. :)
Wow TK, I'm impressed.
(I may just have to contact those i.d. guys and tell them that was my idea!) :D :D -
Did they have a version where the middle piece was a pair of pliers?
Oooh, that's a good idea! You mean like a pair of pliers with a T-rail for one of the other modules to click into right? So the plier (or wrench!) would just take the place of the carabiner rail piece. :)
Wow TK, I'm impressed.
(I may just have to contact those i.d. guys and tell them that was my idea!) :D :DIt'd probably end up looking like that one tool. Can't think of who made it. The one with the snap in sections. Obviously that went over well if I can't even remember the name of it.

-
Coleman Pro Lock? ???

-

Overall from what I have seen in person from the Flux is that it's a rather well thought out piece. If the Flux was never released beyond the basic set (knife module and driver module) the idea would fizzle rather quickly, the main thing the Flux has going for it is that it is a platform for all kinds of expansion. It's kind of like a radical twist on the Coleman Pro-Lock. The Flux and it's success relies solely on the sum of it's parts, if they can keep up with demand and even release some new modules now and then it might stand a good chance. I think CRKT/ ID Works creates some fantastic designs and this is something so radical it could work. I am not too fond of the smallish nature of the main blade or maybe the fact that everything is bead blasted (god I love shiny metal) but it's got lots of potential and I cannot wait to try one out. When I EDC multitools I rarely have need for pliers, I am more knife and driver based than most folks and it just works for me. Just the Flux "basic" set is enough to fill that need and would give me other ways to expand if I chose to do so. Hey CRKT, you can drop one off anytime....

Did they have a version where the middle piece was a pair of pliers?
I think an adjustable wrench, similar to the Guppie might be a better, or at least more workable idea. After all, the Flux kinda looks like the offspring of a Guppie and a Pro-Lock!
Def
-
Coleman Pro Lock? ???

Yup The original intention was to make "pods" that you could change oout for diff. Uses.
So I guess it's for POD People? :D I wonder how you can get the plastic "pods" onto the Jaws. Maybe Def's right about the adjustable thing. might be easier. But heck if they can do what they did so far, why not go all the way. I'd like a nice pair of channel locks on my pods.

-
Actually the Coleman was a great tool Idea. However the production of them wasnt up to par.
-
@Raukodur said:
This idea of two parts joining together to make a tool, each containing a set of implements which allow you to do something could also work with a pliers based folding MT.Each 'handle' could be made detachable, and could contain different implements, e.g. a USB key and a LED torch, electrician implements, knives, a hex bit driver and bit holder (like the cybertool), etc.
The process could be taken further by making the plier heads interchangable, so you can swap on a needle nose, or a blunt nose, or an angled head etc, etc (I believe a Gerber model already does this)
If a tool maker put enough effort and money into making a really good one of these, i.e. a very customisable tool, where you have a basic chasis onto which you put handles containing tools, and heads for the job you need, it could work out very nicely.
It is good to see examples of customisable tools like the flux.
Ahem...
Ahem.... 
I really hope CRKT can carry this idea on to different designs and forms of the multitool.
-
I'm sure I could find a use for that Ta Bar

Overall, they seem to be coming up with some nice original designs. Nothing else jumps out at me yet, but I can see how that shiny knife might be popular. How about something without a lock CRKT?

-
@nuphoria said:
I'm sure I could find a use for that Ta Bar
Overall, they seem to be coming up with some nice original designs. Nothing else jumps out at me yet, but I can see how that shiny knife might be popular. How about something without a lock CRKT?

The edgie I was lockless wasn't it? :D
And the slip K.I.S.S.'s?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login