Leatherman MUT?
-
-
@gadgetman7 said:
I don't think the US government will buy these without a substantial discount. I used to work procurement for DOD and it is basically the lowest bidder that meets mil-spec. I don't think the mil standard will justify this tool when a basic cleaning kit works. This will probably be aimed at the individual soldier for personal kit. Besides, the street price will likely be 30% less than the MSRP in the US.Are we talking the same DoD that buys $500 toilet seats??

-
@Grant Lamontagne said:
Sorry - whilst the debate on how suitable it is has been very interesting and all that, I can't get past "How effing cool is that? :o
Yes please :)
Are you kidding me? I'm already pricing AR15's... :D
Def
Building your own is a good way to go. It does not take a lot of tools and the how-to videos are on line for free. You can buy a low end kit for under 400USD add a striped lower receiver for 100 and you can have a new AR for about 500USD.
Mike
-
@Grant Lamontagne said:
Sorry - whilst the debate on how suitable it is has been very interesting and all that, I can't get past "How effing cool is that? :o
Yes please :)
Are you kidding me? I'm already pricing AR15's... :D
Def
:D :D
My sentiments also. I've only got airguns, but one way or another I'll <u>find </u>a use for this one :) -
@BIG-TARGET said:
Are we talking the same DoD that buys $500 toilet seats??
Yep. Depends on the MIL-STD. The media tends to only tell half the story. Usually there's some requirement that requires an item to be unique and that's when you get high prices. But on individual gear for soldiers, where DOD is buying quantities in the tens of thousands, there is a lot of GAO scrutiny. So I imagine that this won't be standard issue. Be cool if I was wrong. Our troops deserve something like this to be issued to them at no cost.
-
I know a few Guardsmen, who have multiple tours in Iraq/Afghanistan. And lot of them bought their own LBE and body armor(Eagle, Blackhawk, 5.11, Maxpedition, etc.). And their reasoning was better fit, quality, and survivablity.

-
Are we talking the same DoD that buys $500 toilet seats??

Yep. Depends on the MIL-STD. The media tends to only tell half the story. Usually there's some requirement that requires an item to be unique and that's when you get high prices. But on individual gear for soldiers, where DOD is buying quantities in the tens of thousands, there is a lot of GAO scrutiny. So I imagine that this won't be standard issue. Be cool if I was wrong. Our troops deserve something like this to be issued to them at no cost.
I was surprised at this too. A generation ago when I was in the military, I could not believe the prices that they would pay for some everyday items. But recently, after checking some of the current procurement price lists, it seems they are now paying the average discount price for most things. Go figure...
-
Special Forces, if they see fit, will purchase these tools. My brother, who is in the Army, just got back from Israel, and was issued a pretty tough Gerber B.O. multitool, that I have never seen on any forum. Let's also keep in mind that the military gets contracts and buys these in bulk, lessening the price.
-
The user replaceable tools would lend themselves to customization and modding .
Chris
-
@Grant Lamontagne said:
Are you kidding me? I'm already pricing AR15's... :D
Def
I can just hear my wife: "Let me see if I got this straight. You're buying <u>another</u> gun, so you can buy <u>another</u> multitool?"

No honey, I already bought the tool when you weren't looking, now I need to spend $1200 on the gun so I didn't waste the $150 I spent on the tool. Sheesh... ::)
Def
-
@genevabuck said:
Special Forces, if they see fit, will purchase these tools. My brother, who is in the Army, just got back from Israel, and was issued a pretty tough Gerber B.O. multitool, that I have never seen on any forum. Let's also keep in mind that the military gets contracts and buys these in bulk, lessening the price.Pictures please? :D
-
I see him about once a month now. I will do my best.
-
Thank you; likewise, tell him thank you for his service. :)
-
I MUST have one of these!
-
@Grant Lamontagne said:
@Grant Lamontagne said:
Are you kidding me? I'm already pricing AR15's... :D
Def
I can just hear my wife: "Let me see if I got this straight. You're buying <u>another</u> gun, so you can buy <u>another</u> multitool?"

No honey, I already bought the tool when you weren't looking, now I need to spend $1200 on the gun so I didn't waste the $150 I spent on the tool. Sheesh... ::)
Def
Don't you still have to buy a gun for your bayonet too? ::)
-
Leave the teeny bayonet out of this! It didn't do anything to you!

Def
-
Ok, now I'm curious about the plastic parts. Can you say anything about the quality of the plastic? Are the side plastic inserts necessary to keep the bits in the bit channels in place (looks like they make up one wall)? Also any "nadir view" pics of the third bit holder while the tool is closed? The formed plastic inserts that frame the AR specific tool look like they could be removed revealing tool bays in which other purpose built inserts could be added.
-
@Dizos said:
Ok, now I'm curious about the plastic parts. Can you say anything about the quality of the plastic?The plastic seemed to be a high impact grade. Two of the plastic pieces were simply "nests" for the folding pin punch and bronze scraper. The third piece was an optional holder for flat bits.
Speaking of which, this optional holder can either be used to store the third (short bit) if you wish to keep the bit driver empty to provide quick access to the strap cutter, or it can hold an extra "long" flat bit. Which makes us assume that additional "long" flat bits (besides the two that are included with the tool) will be available as accessories.
@Dizos said:
...Are the side plastic inserts necessary to keep the bits in the bit channels in place (looks like they make up one wall)?Yes. The metal only folds around three sides of the bit channel. The plastic inserts make up the fourth side.
@Dizos said:
Also any "nadir view" pics of the third bit holder while the tool is closed?Is this the angle you are asking for Dizos?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login