2 x Multitool EDC
-
For a while I carried a swisstool and a SOG power pliar. It was handy for the one in a million shot when I needed 1 for holding a bolt and the other for turning a nut. But it was so far and few between that I now just carry a swisstool x on the belt, and have a standard swisstool in my colossus.
-
I often carry more then one , Wave and Sideclip or Skeletool or Spirit . At the moment I have a SideClip and Vic Farmer but theres a Wave in my coat pocket .
@Benner said:
That kind of EDC is not for me as I personally see tool duplication like that as a waste for my needs (other peoples needs will vary of course). I don't even like to carry more than 1 tool with blades, hence why I have a knifeless Fuse, so that set up is my worst nightmare! :o :DBen I like to have more then one blade on me . If I have to do alot of cutting and one goes dull or if I cut something dirty and the blades contaminated then I like to still have a clean one .
Dunc
-
I can see that logic Dunc and when I carry a slippy, obviously I have more options. But these options are different blade styles. I wouldn't want to carry 2 of the same as again I would see that as a waste for my needs.
However, when was the last time you have run out of edge on a knife when out and about? I haven't. On biggie jobs at home I can either get another knife or re-sharpen. I just don't have the need for a second blade.
I actually carry a sack load of stuff, but it has taken me ages to filter it all down to no or very little duplication. I'm a bit OCD when it comes to that. :D
-
I struggle with the same thing so wouldn't carry two multis. The mini tool kit contains a pocketwrench now so that would do for holding a bolt in one hand.
Now I want to see all this stuff you're carrying around Ben

-
@Benner said:
I can see that logic Dunc and when I carry a slippy, obviously I have more options. But these options are different blade styles. I wouldn't want to carry 2 of the same as again I would see that as a waste for my needs.However, when was the last time you have run out of edge on a knife when out and about? I haven't. On biggie jobs at home I can either get another knife or re-sharpen. I just don't have the need for a second blade.
I actually carry a sack load of stuff, but it has taken me ages to filter it all down to no or very little duplication. I'm a bit OCD when it comes to that. :D
Yes I like to have different blade styles and prefer one to be serrated .Its when I'm out and about that I'm more lkely to need more then one blade . As I'm often near the river using my tools there is a risk of Weil's disease so I don't like to take any chances .
I also hate the idea of having just one blunt blade with me :o
Dunc
-
You could always try, sharpening? :P :D You have the need so carrying one is sensible :), if I needed to I would but just don't have that requirement.
Chrissy I'll try and get a pocket dump pic up later.
Was going to do a bag dump as well, but after looking I just can't be assed. :D -
Isn't it funny how we are different . Duplication isn't a problem for me and I like to have a "Spare " something on me . I'v even started to carry two torches sometimes ::)
Although Ben I'm sure I don't have as many drawer queens as you think I do

I love winter time because I can load my coat up with loads of EDC stuff :D I have to have a total rethink come summer

Dunc
-
Thing is, with the spirit and skeletool, especially when it comes to blades, I dont think there is much overlap at all, since I consider the spirit knife a safety knife, short width serration on the end of a blade without a tip. The skeletool blade is the complete opposite, very aggressive, with serrations near the base of the knife, and a point.
Also with the pliers, the skeletool has thin, needlenose pliers, the spirit has short, stubby stronger ones.
In terms of screwdrivers, the skeletool has a short bit driver (can use bit extender to gain greater reach and use 1/4" hex bits), the spirit has dedicated drivers with some more length on them.
Not counting the can opener, thats where the duplication stops, since the skeletool has no other tools, and of course the spirit has.
Because of these factors, and the fact that I find the skeletool too sexy to not EDC, but a bit function deficit, I think this combo may work well. Oh, and the spirit is also so very cool with its aesthetic handles, and everything clicking into place.
-
I keep a BuckLite 355 in my bag as a spare pliers-based to compliment my backpocket Wave. Been using them simultaneously a lot lately to bend wire for small household projects. I also keep a Handy Boy clone in there for more "serious" plier-ing, but it doesn't get used much. Frankly, I have a hard enough time keeping my pants up as it is...carrying two full-size multis might make for embarrassing social situations :P
Most of the time, though, I just have a Wave+Micra on my person.
-
@Raukodur said:
Thing is, with the spirit and skeletool, especially when it comes to blades, I dont think there is much overlap at all, since I consider the spirit knife a safety knife, short width serration on the end of a blade without a tip. The skeletool blade is the complete opposite, very aggressive, with serrations near the base of the knife, and a point.Also with the pliers, the skeletool has thin, needlenose pliers, the spirit has short, stubby stronger ones.
In terms of screwdrivers, the skeletool has a short bit driver (can use bit extender to gain greater reach and use 1/4" hex bits), the spirit has dedicated drivers with some more length on them.
Not counting the can opener, thats where the duplication stops, since the skeletool has no other tools, and of course the spirit has.
Because of these factors, and the fact that I find the skeletool too sexy to not EDC, but a bit function deficit, I think this combo may work well. Oh, and the spirit is also so very cool with its aesthetic handles, and everything clicking into place.
To show you how my mind works :D in that specific set up i see duplication of;
Pliers,
Wire Cutters,
Knife blades,
Bottle openers,
Phillips drivers,
Flat heads,Basically, for me, the Skeletool offers me nothing additional to a Spirit apart from duplication. All the differences you mention are minor for my needs and make very little difference. In my head, swapping both of those for a Swisstool would give me a better set up as I'd miss the ruler so I would just carry that instead.
See, told you I was OCD with it all. :D
-
@Dunc said:
Isn't it funny how we are different . Duplication isn't a problem for me and I like to have a "Spare " something on me . I'v even started to carry two torches sometimes ::)Although Ben I'm sure I don't have as many drawer queens as you think I do

I love winter time because I can load my coat up with loads of EDC stuff :D I have to have a total rethink come summer

Dunc
It seems you don't have drawer queens, more pocket queens. :D
-
Isn't it funny how we are different . Duplication isn't a problem for me and I like to have a "Spare " something on me . I'v even started to carry two torches sometimes ::)
Although Ben I'm sure I don't have as many drawer queens as you think I do

I love winter time because I can load my coat up with loads of EDC stuff :D I have to have a total rethink come summer

Dunc
It seems you don't have drawer queens, more pocket queens. :D

-
No two full size Mt's here. When some work needs more than just my wave can handle, I always have my not so mini, mini tool kit with me :)
-
Not many times I need 2 pliers.
On the farm, I often carry a Pliers based Multi and a CRKT Guppie. The plier and wrench combo is useful sometimes.
If I were to carry 2 pliers based multis it would be a LM Crunch and another pliers based tool.
-
@Raukodur said:
Does anyone find themselves in a situation where they may need two sets of pliers at once?That's why I keep a pair of cheap pliers at work, which is about the only place I regularly go. If I ever have a task that the Crunch can't handle alone, I'm prepared. I'm kind of with Benner on this, and of course YMMV, but I carry my SAK and my Crunch because, despite a few overlaps, they each have something the other lacks. The Crunch has great pliers and a file that the SAK lacks, the SAK has two straight blades, scissors, and a preferred Philips head that the Crunch lacks. Even with that said, though, I still carry a smart phone, laptop, and an MP3 player, each which can play MP3's, so I suppose the idea of backup gadgetry isn't something I can completely disagree with. :D
-
If I had room in pockets I probably would carry a secound multi just because I like the darn things. But I have two much other stuff that I like to carry that gets in the way.
-
I'm thinking of getting a Leatherman Crunch to keep my Spirit company .
Chris
-
I've been known to carry a Surge and Crunch during times of heavy home chores. Generally I too am one to avoid duplication. The idea for me is to carry as many different tools as I can comfortably carry.
I've tried pairing a Skele' with a Vik Rambler. Very little duplication there but I always end up going back to my Charge TTI with a 4" adjustable wrench in one of the side pockets.
-
Yay, another semi old thread to revive!
I just got my crunch, and after playing with it all evening, I really want to carry it. Problem is I absolutely cannot take my Blast off my belt(too many saves to count), and I need another knife (LM c33b with special bit) for work. I am in Loss Prevention at a Resort, so you wouldn't think I would need very many tools at all seeing as how we have full time maintenance staff on duty, but I tend to tinker with stuff and I am actually responsible for lock and safe repair throughout the resort. I am seriously considering packing the Crunch next to the Blast full time, and removing the Vic soldier from my pocket for work. I am always over prepared and I tend to carry way more than I will ever need, especially when it comes to knives/MT's. But in the rare situation when all my tools are needed, I outshine my poorly equipped maintenance staff when I can fix something while they run back to the shop to get the tool they need.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login