What's your definition of a "beater"?
-
Definition #1 is the closest for me.
"Beater" is any tool or knife where I don't worry about the consequences of using it for something - e.g. if I'm worried that something I'm about to do will damage my Charge, then I might grab something cheaper to replace if it should happen - usually a Core or ST300 nowadays.
-
I only have three plier based multi's , all get used as needed . I don't have any that I consider "loaners" , or expendable .
Chris
-
A "beater" tool to me is one that is more than just a user. It's a user that--if push comes to shove--has to do the dirty jobs.
Such as: used as a wedge, gets beat on with a hammer if situation necessitates, is the tool used in less than appealing situations (such as repairing the chain mechanism of the manure spreader, or picking ball bearings out of the drip pan full of old oil/grease.)
Basically, it's a user that occasionally is offered up as the sacrificial lamb. >:D
-
I like Mr. Whippy's definition. The tool that has to do the worst of the worst jobs. As nasty as those jobs can be sometimes, I would never trust those jobs to some knock-off made of muffler ball-bearings.
-
Both definitions, really. It would be any tool I plan to abuse (and I tend to abuse the cheaper ones).

-
Am I the only one that doesn't have "beater" tools? I use my tools for what they are designed for, if they break, it was faulty and gets RMAed, if it has to do something dirty it can be cleaned and sharpened.
-
@Magnus said:
Am I the only one that doesn't have "beater" tools? I use my tools for what they are designed for, if they break, it was faulty and gets RMAed, if it has to do something dirty it can be cleaned and sharpened.Guess it depends on what you think they were designed to do... >:D
Leatherman pliers head is wedged shape therefore if I need a wedge, and it's in hand, it's gonna get used as one.
Likewise, IMO, all pliers should be expected to stand up to twisting action. To me, a pliers is THE tool for grabbing something and twisting it (like wires, bits of sheet metal etc).
Hammering on tools is abuse, but on the farm, that's gonna be the way it's gotta be sometimes. My beater tools better be up for it.
-
@Mr. Whippy said:
Am I the only one that doesn't have "beater" tools? I use my tools for what they are designed for, if they break, it was faulty and gets RMAed, if it has to do something dirty it can be cleaned and sharpened.
Guess it depends on what you think they were designed to do... >:D
Leatherman pliers head is wedged shape therefore if I need a wedge, and it's in hand, it's gonna get used as one.
Likewise, IMO, all pliers should be expected to stand up to twisting action. To me, a pliers is THE tool for grabbing something and twisting it (like wires, bits of sheet metal etc).
Hammering on tools is abuse, but on the farm, that's gonna be the way it's gotta be sometimes. My beater tools better be up for it.
can you not buy pliers that are designed for hammering on?
I don't work on a farm, or ever have to hammer on tools really, but if I did, I would buy something designed for that.
-
"A knife whose breaking will not be a significant loss"
in other words a red shrit knife, I like to take care of my EDC but have 2 Wengers that if something happen to them oh well
-
@Mr. Whippy said:
Am I the only one that doesn't have "beater" tools? I use my tools for what they are designed for, if they break, it was faulty and gets RMAed, if it has to do something dirty it can be cleaned and sharpened.
Guess it depends on what you think they were designed to do... >:D
Leatherman pliers head is wedged shape therefore if I need a wedge, and it's in hand, it's gonna get used as one.
Likewise, IMO, all pliers should be expected to stand up to twisting action. To me, a pliers is THE tool for grabbing something and twisting it (like wires, bits of sheet metal etc).
Hammering on tools is abuse, but on the farm, that's gonna be the way it's gotta be sometimes. My beater tools better be up for it.
can you not buy pliers that are designed for hammering on?
I don't work on a farm, or ever have to hammer on tools really, but if I did, I would buy something designed for that.
Nice in theory. But as they say, "In theory, there is no difference between theory and practice. But, in practice, there is." ;)
One cannot have a drift or wrench for every situation. It would be great to be able to buy every tool ever made, for even those one-off jobs. However, sometimes, one has to improvise. That means something is gonna get hammered.
...and one last point: Horses and weather can turn an otherwise straightforward job into something requiring unique solutions, using improvised tools in a questionable manner.
-
Basically, it's a user that occasionally is offered up as the sacrificial lamb. Evil
I love that.

But what is funny SAK were known as "beaters" because people had them so they wouldn't harm their $300.00 knives

-
Thanks for the replies, all! If it's not tloo vague to say, I'll say: that's kind of what I thought, but curiosity compelled me to ask. :)
Thanks!
-
ok............here is the real low down as I see it
A-one mans beater is another mans treasure
B-use it everyday, scratched and scuffed, tip of blade broke, but still the old reliable and familiar
C-a pristine collector tool that will never touch the head of a slot head screw....a virgin tool
D-so we use our beater tools to preserve the sacred virginity of our collector tools, knowing full well what a much better job the virgin tool is capable of.
E-a beater tool is the result of our inborn traits to protect the family.......so when the beater tool finally dies....a ready replacement is at hand
F-use the best.......collect the rest..........take the test........like they do out west.......in their final quest.......with ample zest......to place the beloved beater.......in the pocket of their............. vest......
G-caveat emptor......one may accidentally purchase a beater if the buyer does not execute their due diligence

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login