Leatherman PST chronology project
-
My guess would be that while the rest of the tool was produced and assembled in the USA the file has obviously been sent over form Japan. Perhaps as an over-run on what was required from the Japanese factory, or it's maybe it was because they didn't have the facility's to produce the files themselves. Bob's story form Kutmaster suggests they were having a lot of parts subcontracted at one point anyway, so while some may have gone to other US companies perhaps they had to look to the Japanese to get this done.
-
It's highly possible. I have two here that are identical in every aspect. With "over 10 million" PSTs out there, that would be one hell of a coincidence if it were random, rather than a distinct configuration in the history. :-\
In other words, if I have two, there will be more out there for sure.
-
I went and looked at the two I have and can see the top os a JA poking out alittle on one of them.The other I cant tell without taking it apart. I
ve noticed that the early files were double cut on both sides and a change came to the single cut file to the outside. Then some time before the date codes were put in the handles they went to the double cut on the outside which are stamped LEATHERMAN. I have examples of these late 80s early 90s of this in Stainless and BO which Ive meant to get posted but havent yet. With DaveK find these single cut outside file may all have JAPAN stamped on them
-
Interesting discovery Dave!

I agree with Gareth. There must have been such a scramble for component parts back in the 80's that that they had them coming from every which direction. :PAnd I doubt there was any effort whatsoever to keep different "generations" pure and seperate. When the assembly department started to run low on knife blades obtained from company A for instance, I'll bet they just brought in a bucket load of them from Company B and poured them into the same hopper. As long as all blades met a certain spec there was no need to keep them seperate. And so the finished tools coming off the line probably were made up of a hodge podge of different generation components.
-
David - I just checked, and your theory holds good with all of my PSTs. So I think we just found another way to date the "odd" ones a bit more finely - great spot.

-
I have a few late 80s early 90s ones I will check when I get home as well
I was looking at a couple the other day to see if anything was on the file of some of the older ones but didn't see anything but that may have been a riveted one
I can't remember for sure great spot guys 
an to the PST II question I have always considered it a PST II in a PST body :D Someone just came up with the idea to rename it prob later though :)
-
Update: The "double double-cut" edged file on this oldie is marked Japan too.
I'm beginning to think that all files were Japanese until the early 90s........

-
This would be easier if the "Japan" would have been stamped just a little higher :D Especially on the riveted ones ::) :D Still not home 2 see mine yet though :D
-
Do I remembering reading that LM were (are?) getting some files from Switzerland? Or am I thinking of something completely different?

-
Well I checked my older knurled screw version and saw the tip end of a J on my file as well
The 1 I have that is riveted has some crud right there and I couldn't quite make anything out on it ::) More than likely it is there as well 
-
@Poncho65 said:
This would be easier if the "Japan" would have been stamped just a little higher :D Especially on the riveted ones ::) :D Still not home 2 see mine yet though :DAbsolutely it would! I wouldn't have spotte dthis if I hadn't been stripping one down, and of course you don't get that option with the riveted versions.
@Gareth said:
Do I remembering reading that LM were (are?) getting some files from Switzerland? Or am I thinking of something completely different?
I remember someone mentioning it, but being sceptical myself. I certainly haven't seen one without Japan or USA stamped on it amongst the probably 60 or 70 I've handled.
-
I remember Spoony posting about LM sourcing files from Switzerland. Was it regarding the California made in USA issues

-
I can't remember, although if Spoony said it, it stands a chance it's right!
-
Well i finally got to the end, i love reading this thread as its so interesting, ever learning, i can see why you guys get into wanting more models now, and there is so many,
question - pliers stamped leatherman tool, 2002 with hard wire notch plus arrow, was they like this until 04 ?
paul

-
@Zed said:
question - pliers stamped leatherman tool, 2002 with hard wire notch plus arrow, was they like this until 04 ?Yes, they kept that style head right up until the PST was discontinued in '04. Even the Cabelas Legacy PST's, which were assembled from parts leftover after 2004, used the new plier head:

-
question - pliers stamped leatherman tool, 2002 with hard wire notch plus arrow, was they like this until 04 ?
Yes, they kept that style head right up until the PST was discontinued in '04. Even the Cabelas Legacy PST's, which were assembled from parts leftover after 2004, used the new plier head:

cheers mate, the pst2 i have has LM usa on the pliers, its a 02 model, i do prefere having usa on the pliers, but all good 
-
question - pliers stamped leatherman tool, 2002 with hard wire notch plus arrow, was they like this until 04 ?
Yes, they kept that style head right up until the PST was discontinued in '04. Even the Cabelas Legacy PST's, which were assembled from parts leftover after 2004, used the new plier head:

well they certainly made that old stock worth a bomb :P
-
-
I miss Bowman... :-\ and the chance of getting my hands on his 007 Cabela..

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login