Show your slip joint's thread!
-
@Magic Bus said:
@Mike, Lord of the Spammers! said:
@Magic Bus said:
@Mike, Lord of the Spammers! said:
Now I'm after a traditional, legal slippy, but with premium steel ::)
A Case with CV steel or something posher?
I'm thinking D2 or S30v or similar :)
Ah, right posh then :D
Nothing but the finest for one such as I :D
I'm leaning towards a Queen Congress atm

-
@Mike, Lord of the Spammers! said:
@Mike, Lord of the Spammers! said:
I got one of these today, and I'm gobsmacked at how good it is, for so little money

http://www.heinnie.com/Knives/Rough-Rider/Rough-Rider-Congress/p-92-602-4141/
The Rough Rider's are good aren't they?
What scales did you get?Orange bone :)
I though seeing as it has no means of attaching a lanyard, it'd better be easy to spot if I drop it :D
Nice, that's the one I'd have gone for as well. :)
-
@Mike, Lord of the Spammers! said:
@Magic Bus said:
@Mike, Lord of the Spammers! said:
Now I'm after a traditional, legal slippy, but with premium steel ::)
A Case with CV steel or something posher?
I'm thinking D2 or S30v or similar :)
Mike,
A Queen in D2 is a good choice. Some others with "premium" steels to look at would be the actual GEC brand with 440-C blades. Also look at the Schatt & Morgan F&W Series which are done in ATS-34. Case did a Series run of Tested Red Barnboard in 154CM.
Some others would be Northwoods, they do alot of slippies in D2 as well. And Canal Street Cutlery has done runs of slips in D2 and 440-C.
2xTap
-
I know this is more of a collector piece but I will show this one any way. :D

-
Heres more.

-
And more

-
You've got some gorgeous toy's there mate

That scrimshawed Puma is just

-
@Mike, Lord of the Spammers! said:
@Magic Bus said:
@Mike, Lord of the Spammers! said:
Now I'm after a traditional, legal slippy, but with premium steel ::)
A Case with CV steel or something posher?
I'm thinking D2 or S30v or similar :)
Mike,
A Queen in D2 is a good choice. Some others with "premium" steels to look at would be the actual GEC brand with 440-C blades. Also look at the Schatt & Morgan F&W Series which are done in ATS-34. Case did a Series run of Tested Red Barnboard in 154CM.
Some others would be Northwoods, they do alot of slippies in D2 as well. And Canal Street Cutlery has done runs of slips in D2 and 440-C.
2xTap
Well I'm skint at the mo, but I can definetly see one in my near future :)
I'll have a closer look at the S&M range, but there monsterously pricey over here :o
-
Lovely lovely knives
(not slippies though :D) -
I will have pics of some slipnots on asap but there were others on this forum that was not so I thought I would just put up some pics. I have to take some pics this weekand.
-
@Mike, Lord of the Spammers! said:
@Mike, Lord of the Spammers! said:
@Magic Bus said:
[quote author=Mike, Lord of the Spammers! link=topic=6299.msg324183#msg324183 date=1265311087]
Now I'm after a traditional, legal slippy, but with premium steel ::)A Case with CV steel or something posher?
I'm thinking D2 or S30v or similar :)
Mike,
A Queen in D2 is a good choice. Some others with "premium" steels to look at would be the actual GEC brand with 440-C blades. Also look at the Schatt & Morgan F&W Series which are done in ATS-34. Case did a Series run of Tested Red Barnboard in 154CM.
Some others would be Northwoods, they do alot of slippies in D2 as well. And Canal Street Cutlery has done runs of slips in D2 and 440-C.
2xTap
Well I'm skint at the mo, but I can definetly see one in my near future :)
I'll have a closer look at the S&M range, but there monsterously pricey over here :o
[/quote]Mike,
I kinda figured as much......just throwing some choices out there for ya. Can't say that I know for sure but I would assume out of the bunch the regular Queen stuff to be a mite cheaper in the UK than the premium lines from them. If so I highly recommend going with the Amber Carved Stag Bone (ACSB Series) from Queen with the D2 blades...........


2xTap

-
They look perfect

Now to see if they do a congress model

-
@Grant Lamontagne said:
If it's a good one then it's a proper Schrade Smiley, if it's a piece of crap, then it's a Taylor Craplery one
Unfortunately, I'm not a man of discernment & taste, so I wouldn't be able to tell the difference :)
Yes you would- they are usually pretty obvious.
The most easily defined feature will be on the blade tang, where it says either China or USA. If it's China, then it's a Taylor Cutlery piece of crap. If the joints and seams are large enough to park an economy car in, it's a Taylor Cutlery piece of crap. If it snaps in half and bursts into flames when you try to use it, it's a Taylor Cutlery piece of crap. If you spend hours sharpening it and the edge is still too round to open an envelope, it's a Taylor Cutlery piece of crap. If you bought it more than three years ago, it's a real Schrade, which honestly wasn't the best quality knife out there, but it beats the pants off the Taylor Cutlery hunks of crap.
Basically, if it's a Taylor Cutlery model, it will be obvious.
By the way, I don't know if I've mentioned this yet but Taylor Cutlery really sucks. The best part about Taylor Cutlery being a bunch of cheap barstids? They know their stuff is crap, which is why I haven't been sued yet. However, they also don't care, because they go to bed at night on mattresses stuffed with money, dreaming about what else they can make the 5 year olds in the sweatshops make for them so they can make even more money. All while waving Old Glory in people's faces and showing photos of brave US troops in war zones, carrying Schrades. My guess is they are either pre-Taylor Schrades or those soldiers aren't with us today, or are models posing on tanks. The only good news is, Taylor knives suck so bad, they fail long before they are needed for a life threatening situation.
Def
A couple of years back, I offered to make [S. Taylor] a PROPER vintage look Schrade Old Timer multitool using high-end components, not the typical Chinese import-spec stuff. Oh well...if they had been interested, I may have never gotten around to working on Multitasker >:D
And from a bidness standpoint, I guess they are laughing all the way to the bank

-
Thanks. It was different. It was one of those not so popular styles so they had it on sale. Im glad i bought it now. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
