Leatherman disassembly tool.
-
What tools are needed to disassemble a LM? I thought it was simply the security torx bit.
-
JBWeld also makes a putty. It's basically like modelling clay. It would be better suited for making a "mold" so to speak. It's also pretty tought. I "welded" an exhaust system together with the stuff once.
-
I am fortunate enough to have some Leatherman issued maintenance tools (as does J-Sews) but even with these in our possession we've been unable to find a supplier of any more.
A quick search on these forums should find you some pics and details, but the JB Weld idea sounds worth trying

-
J-B Weld didn't work. I tried the putty type, and while the package says that it doesn't shrink, I think the problem was that it expanded. My impressions were really good too, and I had done two, yet no love. Sorry!
-
@ryan1835 said:
would a cnc be any good for making one or not?Unfortunately not Paul, going by what Bob said ; "To actually cut the fancy "star" pattern into a piece of steel requires a wire EDM machine".
I believe it is a highly speSmurfpillsed bit of kit :( :( :( :( :(.I used one of my modded sockets last night to pull apart one RUSTY PST , I had to use my Crunch to hold the opposite fastener too stop the whole thing turning.
I need to make another socket so I do not have to use my Crunch.@skunkbad said:
J-B Weld didn't work. I tried the putty type, and while the package says that it doesn't shrink, I think the problem was that it expanded. My impressions were really good too, and I had done two, yet no love. Sorry!Bummer mate :( :(. The fact that it took the impression shows promise :D

-
Damn. We might be on the right track though, as the theory is sound. Just gotta find the right medium.
-
can any one post a pic of the screws on the tools, im going to ask my lecturer tomorrow to see if he thinks theres anyway, going to a specialized engineering college may have its ups for once :P
-
Well here's some of the genuine tools:

The screws are just like the ones on your Micra, of varying diameters. In the above pic, the socket fits the Micra, the left hand tool fits the PST, and the right hand fits the plier end of your ALX (t'other end is PST sized).
The only exceptions to those three sizes were the big screws used on one end of the Minitool, all other LMs with knurled screws can be tackled with what's in the pic above.
-
Looks like a spline, like on a rear end differential. Anything close to that only smaller exist? Or what about a casting? Anyone know a blacksmith?
Mike
-
Ok, I had another thought on this. Hopefully I can make sense out of what my idea is. It would look something similar to this but obviously on a smaller scale. Sorry for the crummy picture, but I think you can get the idea.

Now, what if you had two points of contact or possibly even three? Maybe even make the pointed pieces adjustable instead of one adjustment point. I don't know how difficult the Leatherman fasteners are attached, but you could possibly use a fiber re-enforced tube that would hold the metal screw adjuster and pointed pieces that would clamp/snug into the notches of the fastener.
I'm sorry for not making it more clear and I hope the picture helps. Unfortunately, I do not have the equipment to fabricate something like what I am envisioning in my head.
Mike
-
I have a thought. I remember reading on Rakers website or on the multitool.org forum that Ray Kirk, the guy who makes the Raker ring tools, sends out his blanks to a guy who uses a water cutter to shape his tools and Ray finishes them.
I may be completely wrong on the details here as I can't find where I read it, but maybe we can get someone to precision mill us a batch of these. I am keenly interested in getting a set of these tools. I want a graceful, safe way to dismantle my Leatherman tools with knurled screws.
-
@Crouton said:
I have a thought. I remember reading on Rakers website or on the multitool.org forum that Mr. Raker, the guy who makes the Raker ring tools, sends out his blanks to a guy who uses a water cutter to shape his tools and Mr. Raker finishes them.I may be completely wrong on the details here as I can't find where I read it, but maybe we can get someone to precision mill us a batch of these. I am keenly interested in getting a set of these tools. I want a graceful, safe way to dismantle my Leatherman tools with knurled screws.
You are 100% correct. I believe Great Lakes Waterjet does the milling for the Raker tool. They have great prices and no minimum and no setup fees. We would just need the exact measurements and pattern of the tool.

-
If one were to count the points on the screwhead of the Leatherman, and do a search saying "32 point female socket, one already made may be found. I know they already make a multi-point socket for diesel fuel injectors the look the same only bigger.
-
Couldn't someone just send them samples of the Leatherman fasteners we want the tools made for?
Mike
-
-
Couldn't someone just send them samples of the Leatherman fasteners we want the tools made for?
Mike
I think Dave and Bob have them stored in a safe and that they will NEVER leave the house.
I didn't say send them the tools that Dave and Bob already have. I suggested someone send the waterjet company the actual fasteners that hold the multi-tools together. That way they could measure them and do what they need to make more disassembly tools. Got it? :D
Mike
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
