Thinking about a Cybertool .
-
I measured my CT34, CT41 and CT Lite:
CT34 (125th anniversary - may be thicker?): 28mm
CT41: 32.8mm
CT Lite: 33.5mmIf you want a more tangible comparison, a CT34 is almost the same thickness as a Champion Plus. The CT41 or Lite is about the same thickness as a SwissChamp. The CT29 is about the size of an Explorer.
-
Hi
The CyberTool 34 is a good choice,
NM

-
I am thinking about a cybertool 41 for edc. I like the swisschamp, but I think I would use the bits more than the fish scaler and magnifying glass. Jazzbass says the CT41 is the same thickness as the swisschamp anyway. I currently edc a sog powerlock. In terms of weight I'm shaving off 3 oz total if I switch. The only crossroads I am faced with is if I will be missing the massive beast pliers.
Any thoughts?
ps- what is the blade length of a CT if measured where the scales end?
-
if you need the pliers for heady duty things the CT will not deliver, other that that im sure it will be up to the task

if it counts for anything i always have a SOG PL and a CT34 in my bag :)
-
Stop thinking and get one. I love my 34.
-
Question about the CT lite. If I wanted to make it slimmer, could you remove the magnifying glass and shove the can opener and bottle opener in its place? it seems a little crammed length wise, may have to do some shaving, but what about the width?
-
I think not.
It seems too long to fit with the light :/ -
Not even if I were to shave the ends off a little?
unless my eyes decieve me, I think the bottle opener is a tad longer than the can opner. There is a slight amount of space to grind a little off the end of the bottle opener and reshape the screwdriver edge. I am not sure about the can opener in terms of fitting but it looks pretty close.
NOW will it work?!
-
the bottle opener is 2-3mm longer than the lens.
don't know :/wait for the serial modders ;)
-
@Kmarr said:
Question about the CT lite. If I wanted to make it slimmer, could you remove the magnifying glass and shove the can opener and bottle opener in its place? it seems a little crammed length wise, may have to do some shaving, but what about the width?Or do what I did. Take the opener layers out along with the small blade. Then in the small blades place add the combo tool. My cybertool consists of: large blade/combo tool, scissors, drivers and bits. Then back side I have a corkscrew with mini driver, and hook will file. All wrapped up in black plus scales.
-
wait...what's the combo tool?
-
I asked this in another thread as well, but is it possible to put the awl on place of the chisel or fine screwdriver?
I want to get rid of the opener layer but I always have a need for an awl. -
It can be done but the awl is slightly too thick, so you would need to thin it a bit. Easier still, just grind the chisel into an awl :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login