91mm Combo tool
-
@Gareth said:
In my defence the original Trail Guide wouldn't have a awl either (unless I'm missing something
) but the one I made did lack the hook that the proper one would have.Care to share what you are planning?

I do believe your right, must of wandered off into the land of 'victorinox-actually-implementing-backspring-tools-on-saw-type-layers' and since everything starts at the awl made the gross assumption right there.
I was saving the details till i actually presented in its glory but i might as well put it up for critique
the Victorinox
Trail GuideSaboteur Mod
Layer 1, Large semi serrated Blade, Combo tool (and keyring), philips
Layer 2, Scissors, 58mm phillips mounted so it somes out like the backspring long nail file (or get lazy and go the nailfile Hook)
Layer 3 Metal file/saw, fine screwdriverInitially Black Plus scales but if i get lucky and get a voyager i will use the onyx scales ( i wander how hard it is to change over the electonics of the traveler...)
For the philips i am going for the older half-square bottom design as it sits nice and flush (i think its been mentioned its a better profile than the newer ones too) for the fine
The fine screwdriver is what i am sitting on the fence on.. i have two rangers for the metal saw to choose from, which one goes under the knife depends on if i want the pre-85 design or the newer one shown on your trail guide.. there must of been good reasons for the update (probably easier access) but te older design might be better for recessed screws?


This is going to be m edc/global roamer sak if it works out i have an alox wenger version ..don't ask me about that.
-
Sounds like a great mod, "Saboteur" is a great name too.

-
@Santos said:
The fine screwdriver is what i am sitting on the fence on.. i have two rangers for the metal saw to choose from, which one goes under the knife depends on if i want the pre-85 design or the newer one shown on your trail guide.. there must of been good reasons for the update (probably easier access) but te older design might be better for recessed screws? :thinkFor this application, I'd pick the older driver myself. On the older knives (pre-86), the screwdriver was always on the layer next to the corkscrew cutout - typically in the metal file layer. It sits really low in the back of the knife, so the liner next to it is scalloped to allow you to get to the nail nick.
In 86 when they introduced the chisel, they put that tool in place of the old fine screwdriver. Like the old screwdriver it sits real low in the back of the knife, so it has the scalloped liner to get to the nail nick. Since the chisel now sits next to the corkscrew, the fine screwdriver is moved to the woodsaw layer - typically in the middle of the knife (for Champs, Champions, etc). Now, cutting out liners won't help with access to it, so they put that big hump on it to expose the nail nick.
Using the old screwdriver with an old scalloped liner would be my preference, as it cleans up the back of the knife and allows access to more restricted areas.
-
This thread needs more pics. I like to pair the combo tool with the in-line phillips & mag layer.
It is unfortunate that you lose the awl when you drop the opener layer. IMO, the Scibeer Yo-Man, on the right, would be nearly the perfect SAK if it had an awl.

-
Then you need to find a fodder Range or Champion the go Charles Dicken's on Scibers arse
"Please Sir....... can i 'ave some awl?"
or bust out the blaxpoitation on the man
"Hey Yo....
.. Man needs a reamer.You know what i be sayin'?"course with the right Champion you could upgrade your old one and have 90% of the components to make a 2nd awl inspiring Yo Man..
Sciber also made a Awl from a hook in one of his mods too from memory...
-
@Zack said:
Mike 56 just got done modding my perfect sak. Its a Cybertool with: Combo tool/blade, scissors, bit driver/bits, corkscrew, hook, and it will have black plus scales. Still no idea on what I am going to name it..thinking Cybertool Slim, but I don't know.Can we get more info on this mod? I was thinking of doing a mod (my first) and this is the exact thing I was thinking of trying.
WHat were the donor knives? I need to get some cheap donors...
-
Mike 56 just got done modding my perfect sak. Its a Cybertool with: Combo tool/blade, scissors, bit driver/bits, corkscrew, hook, and it will have black plus scales. Still no idea on what I am going to name it..thinking Cybertool Slim, but I don't know.
Can we get more info on this mod? I was thinking of doing a mod (my first) and this is the exact thing I was thinking of trying.
WHat were the donor knives? I need to get some cheap donors...
For that you would need to get a Cybertool 29 (for the bit driver) and a Compact (for the combo tool, scissors and hook). Obviously either one will give you the blade, plus scales and corkscrew.
Try dropping Felinevet a mail and asking if he has any second hand ones in stock.
http://felinevet.sosakonline.com/index.php?option=com_frontpage&Itemid=1
Sounds like a good project, best of luck. :)
-
I don't know why Vic doesn't use more combo tools. I like the backward can opener better than Vic and Sog's current models. It seems to me that a bottle opener/can opener/ wire bender/screwdriver is more useful than a redundant small blade.
Vic is known for cramming a massive amount of tools in small spaces, it doesn't make sense to me that they would forgo the combo. -
See, they used to, Kmarr, like with the Mechanic Jr/Special Mechanic, Scientist, Yeoman, Trailblazer, and /maybe/ a few others (PLumberjack, anyone?), but like someone said on SOSAK, it could be because of the higher cost of those knives, and also psychological - why pay the same or slightly more with a knife that is "thinner" with less tools (no awl, for instance), instead of getting a Mechanic or Explorer, instead. :/
Still doesn't mean I agree with it.
-
I agree with nutSAK when he said this thread needs more pics. Anyone got any pics of older/obsolete combo tools?
Ps- do you have to lose the awl when you lose the openers? Is it possible to shove it in place of the chisel or fine flat driver?
-
I'll try and get some pics of my Cybertool Slim and Illuminated Scientist up tonight.
-
@Kmarr said:
I agree with nutSAK when he said this thread needs more pics. Anyone got any pics of older/obsolete combo tools?Sure. Here is what I have in my collection or mods I've made. Let's start with 84mm:
Golfer (there is also a rare version of this with the long file on the back):

Waiter (there is also a phillips version of this called an Apprentice):

Lumberjack (this is a mod I did adding the phillips):

Some 91mm knives. The only ones missing that I can think of that are "official" or semi-official are the 91mm Waiter and SwissBianco Yeoman Mechanic.
Golfer (original Compact, no hook):

Scientist:

Trail Guide:

Yeoman:

Yeoman group shot - original Vic, SwissBianco version, and YeoTimer mod I made for my EDC:

Techline "Mechanic Jr". This also came with red scales:

Timekeeper (older versions had Roman numerals on the dial at 12 and 6):

Duke of Edinburgh Pocket Tool:

A custom Scientist w/ LED I made for Zack:

And last but not least, the modern Victorinox Compact - the only 91mm combo-tool knife still in production:

-
That's a great collection and superb shots Jazzbass.

The only thing I can add is an old mod of mine that is very nearly a Trailmaster, except mine has the small screwdriver that Santos wanted. :D

-
That's awesome, I need to find one of theose 84mm Golfers! No keyring though?
I wanted a Yeoman too, but may just build one up from parts. Can we get more info on that custom scientist? Looks just like a Yeoman with an LED instead of a magnifier, is it much thicker?
Nice white scales. Do they get dirty real fast? I'm going Ruby Sapphire on my current ones, but think I need to get more into solids (white, black, blue?).
-
Another modern creation ...

-
@gunga said:
That's awesome, I need to find one of theose 84mm Golfers! No keyring though?I wanted a Yeoman too, but may just build one up from parts. Can we get more info on that custom scientist? Looks just like a Yeoman with an LED instead of a magnifier, is it much thicker?
Nice white scales. Do they get dirty real fast? I'm going Ruby Sapphire on my current ones, but think I need to get more into solids (white, black, blue?).
I've read that some of the 84mm Golfers had keyrings but none of the three I've owned have had them.
The Yeoman is a good SAK but I made one up for myself and just didn't quite gel with it for some reason. I always ended up carrying either a Compact or a Scientist.

The white scales actually hold up really well in my experience. Might well be my second favourite colour after the green. Ruby red is a great colour as well though, it always looks so much better in person than it does in a picture.
Green.

/topic/17686:D
-
@gunga said:
That's awesome, I need to find one of theose 84mm Golfers! No keyring though?I wanted a Yeoman too, but may just build one up from parts. Can we get more info on that custom scientist? Looks just like a Yeoman with an LED instead of a magnifier, is it much thicker?
Nice white scales. Do they get dirty real fast? I'm going Ruby Sapphire on my current ones, but think I need to get more into solids (white, black, blue?).
The Custom that I have is a Scientist without the mag lens, and added light. There is another variation evidently that has the mag lens and light, but I use a phillips more than a lens so thats what jazzbass made me and is now my new favorite EDC. Pics tomorrow of my Cybertool Slim.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login