Show us your fixed blades
-
traded for both actually. Busse came from Gadget Guy, and the Bravo 1 came from another forum, traded an AL and my Maxped Colossus.
-
My Bravo 1 and Fatty Game Warden



The Bravo 1 is quite possibly the sharpest knife I have ever handled. I cooked dinner with it last night, and it blew every knife I had in the butchers block out of the water. The Busse is the thickest knife I have ever seen or used.
-
While the Busse looks a good knife, the BRKT is just lovely.

-
I'd love to get a Busse one day :)
-
Zack, how thick is the Busse?
My RC-5 is 1/4" and it's a beast. Any thicker and well, damn......
-
Most of the fattys are in the .270 region, this one is thicker than the regular game warden.
-
ok so I actually measured and this one reads .220 on the calipers. Not quite as thick as your RC5, but plenty stout to be such a short knife.
-
@Grant Lamontagne said:
We have a rep from Kizlyar who frequents this forum- I'm surprised he hasn't chimed in yet!
Def
hello, yes, sorry , ive been busy..
normaly i would look in here now and then......Hi Julius,
I contacted Jenni about ordering a Phoenix Combat-1 knife that you designed; based on what I've read, I expect it to be even more impressive than the Phoenix-2 and Korshun I just purchased.
BTW, i couldn't help but notice similarities between the Extrema Ratio Col. Moschin knife and the Phoenix ;)

-
@Multitaskertools said:
well the Kizlyars showed up and my old man "appropriated" the Korshun

next up, a Phoenix 1-Combat (German market only), backordered until ????
yeah sorry about that,,.. unfortunately kizlyar has always a delay with the knives, jenii orders 20 or 30 knives of some model for customers and then by the time she gets it she has as many more orders again orders, but it she should get them soon..
it is not in serial production in the factory,, so her orders just get pushed back constantly.. also it is all made by hand.. sheath stitched by hand, ect.. so it gets delayed ....

here is your phoenix combat with the handle removed. -
Charles May CowKiller
OAL 6 1/8"
Blade 2 3/8" CPM S30V scandi grind
Handle Green canvas micarta w/ mosaic pins
-
@Grant Lamontagne said:
We have a rep from Kizlyar who frequents this forum- I'm surprised he hasn't chimed in yet!
Def
hello, yes, sorry , ive been busy..
normaly i would look in here now and then......Hi Julius,
I contacted Jenni about ordering a Phoenix Combat-1 knife that you designed; based on what I've read, I expect it to be even more impressive than the Phoenix-2 and Korshun I just purchased.
BTW, i couldn't help but notice similarities between the Extrema Ratio Col. Moschin knife and the Phoenix ;)

:) yeah just as bit.
the line of milled kizlyar knives goes back to Extrema ratio...
there was originally 1 knife, "alligator", it is discontinued now many many years........
it was just a copy of the original e/r knife. the one with the tanto blade and the rubber diamond checkered handle . but this was years back when e/r was only a small company.. and kizlyar was only selling in russia,,
i had not even heard of kizlyar my self, or set foot in dagestan..
i think it started as a customer order or such , somebody sent them a drawing of a knife and they made to the picture,, .. then changed the design into several different models with the same handle and produced them in serial,
when it was know that they were making a knife that was a copy of the E/A knife they dropped it from production, (youve got to remember dagestan is very isolated so this took a while......... )
but by the then... e/r genetic was in the knives... one could say, and so some features had stuck,
liked the milled blades, although most e/r knives are ground now..
so thats how they got such a look .. -
@texasflyfisher said:
Charles May CowKiller
OAL 6 1/8"
Blade 2 3/8" CPM S30V scandi grind
Handle Green canvas micarta w/ mosaic pins
lovely grind and mosiac

-
@ausjulius said:
:) yeah just as bit.
the line of milled kizlyar knives goes back to Extrema ratio...
there was originally 1 knife, "alligator", it is discontinued now many many years........
it was just a copy of the original e/r knife. the one with the tanto blade and the rubber diamond checkered handle . but this was years back when e/r was only a small company.. and kizlyar was only selling in russia,,
i had not even heard of kizlyar my self, or set foot in dagestan..
i think it started as a customer order or such , somebody sent them a drawing of a knife and they made to the picture,, .. then changed the design into several different models with the same handle and produced them in serial,
when it was know that they were making a knife that was a copy of the E/A knife they dropped it from production, (youve got to remember dagestan is very isolated so this took a while......... )
but by the then... e/r genetic was in the knives... one could say, and so some features had stuck,
liked the milled blades, although most e/r knives are ground now..
so thats how they got such a look ..Well i like how the milled "rib" on the Kizlyar extends the full length of the blade - i was surprised by how well balanced it felt. Likewise on the Phoenix 1 Combat, i was attracted by your idea to use DIFFERENTIAL heat treatment on the blade, and the Youtube video (now removed) by that German guy really sealed the deal for me - shame the vid isnt on there anymore, it's great
-
Damn you Shane, damn you!!!!
Lucky, pics when you get it!
-
:) yeah just as bit.
the line of milled kizlyar knives goes back to Extrema ratio...
there was originally 1 knife, "alligator", it is discontinued now many many years........
it was just a copy of the original e/r knife. the one with the tanto blade and the rubber diamond checkered handle . but this was years back when e/r was only a small company.. and kizlyar was only selling in russia,,
i had not even heard of kizlyar my self, or set foot in dagestan..
i think it started as a customer order or such , somebody sent them a drawing of a knife and they made to the picture,, .. then changed the design into several different models with the same handle and produced them in serial,
when it was know that they were making a knife that was a copy of the E/A knife they dropped it from production, (youve got to remember dagestan is very isolated so this took a while......... )
but by the then... e/r genetic was in the knives... one could say, and so some features had stuck,
liked the milled blades, although most e/r knives are ground now..
so thats how they got such a look ..Well i like how the milled "rib" on the Kizlyar extends the full length of the blade - i was surprised by how well balanced it felt. Likewise on the Phoenix 1 Combat, i was attracted by your idea to use DIFFERENTIAL heat treatment on the blade, and the Youtube video (now removed) by that German guy really sealed the deal for me - shame the vid isnt on there anymore, it's great
hi thanks , yes the blade construction on the knives form kizlyar was a little different form extrema ratio from the beignning..
here is a knife of my design, its a machete for use in colder climates.
its differentially tempered carbon steel -
Damn

-
Damn, Damn..

Actually we have a colder climate right here, ausjulius.. ;) -
Daaaaaaaaaaaang!
-
Al Mar SF-10 is in, and it is a BEAST! :ahhh



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login