ST 300 owners club
-
BO SUPERTOOL 300 - got it!
I generally like it, however there are some quality issues:
- Locking mechanism was slightly imperfect (the plate that is pushed in to release the opened tool had huge amount of play, I managed to fix it by levering up the tiny uhm edging(?) that supposed to put pressure on the "releasing plate")
2)BO ST 300 makes my hands dirty
- It is so toooo tight
-
I'm so on the fence with this tool. I don't know weather I need another tool that I have to crank open
the handles to access implements. Leatherman has spoiled me with the Charge series units. :) -
I understand what you are saying about the Charge. It sure is nice have those 4 implements on the outside. But really, it only takes a couple seconds to get at the tools in the inside.
Not much really.
-
Got my "like new but previously enjoyed" ST 300 today! Seems really nice, surprisingly the fit and finish on mine is way better than my Surge, the tools don't feel gritty coming out and the handles unfold smoothly with no gritty feeling at all. Hey, I noticed the plier heads have that little angled raised portion that deactivates the blade safeties on the Surge if you know what I mean. It cams over the little pokey things that keep the blades locked in the closed position when you are using the pliers if that makes any sense. The gist of what I'm saying is that I think these plier heads would work in a Surge, and maybe that is what Leatherman is planning if they made them with that cam surface built into them, as it serves no purpose on the ST 300 that I can see. What do you guys think?

-
@Marlinaholic said:
Got my "like new but previously enjoyed" ST 300 today! Seems really nice, surprisingly the fit and finish on mine is way better than my Surge, the tools don't feel gritty coming out and the handles unfold smoothly with no gritty feeling at all. Hey, I noticed the plier heads have that little angled raised portion that deactivates the blade safeties on the Surge if you know what I mean. It cams over the little pokey things that keep the blades locked in the closed position when you are using the pliers if that makes any sense. The gist of what I'm saying is that I think these plier heads would work in a Surge, and maybe that is what Leatherman is planning if they made them with that cam surface built into them, as it serves no purpose on the ST 300 that I can see. What do you guys think?
I am sure that they will eventually make there way to most of the tools
but as is the plier head of the ST300 won't allow the Surge to close completely as another of our members here I believe DaveK tried it for fun and the tool won't close all the way but it will only take a little modifying and we will see it on other tools in the current lineup 
-
I'm pretty sure the same plier head is used on the new MUT, where the little ramps actuate the blade safeties. :)
-
@J-sews said:
I'm pretty sure the same plier head is used on the new MUT, where the little ramps actuate the blade safeties. :)Who knows the MUT may have been on the drawing table longer than the ST300 and the plier head was originally designed for it and somebody said hey let's put that on the ST300 as well :D
-
I'm pretty sure the same plier head is used on the new MUT, where the little ramps actuate the blade safeties. :)
Who knows the MUT may have been on the drawing table longer than the ST300 and the plier head was originally designed for it and somebody said hey let's put that on the ST300 as well :D
:o :o
-
I finally got my hands on one of these. Holy cow, what a beast. I've certainly found my new EDC. I'm loving the simplicity and strength of this thing. The perfect no frills tool.
-
You said it. It's a remarkable tool but I prefer something a bit smaller for EDC.
-
I currently carry a broken LMF spork (broke right in the middle so now it's a fork and a spoon separately) in my Leather ST300 sheath (the part between the bare leather and the elastic in the back). But I'd like to put something like a micro widgy bar from CC in there. An Atwood tool or something similar would work well in there too. I think it's a neglected part of that sheath.
-
I'm beginning to take back what I said about EDC. The ST300 fits very comfortably in hand, it's just bulky to carry on the belt. Does anyone know if the new MUT sheath accomodates the ST300? I think a different sheath may be the answer.... your thoughts?
-
Got my "like new but previously enjoyed" ST 300 today! Seems really nice, surprisingly the fit and finish on mine is way better than my Surge, the tools don't feel gritty coming out and the handles unfold smoothly with no gritty feeling at all. Hey, I noticed the plier heads have that little angled raised portion that deactivates the blade safeties on the Surge if you know what I mean. It cams over the little pokey things that keep the blades locked in the closed position when you are using the pliers if that makes any sense. The gist of what I'm saying is that I think these plier heads would work in a Surge, and maybe that is what Leatherman is planning if they made them with that cam surface built into them, as it serves no purpose on the ST 300 that I can see. What do you guys think?

I am sure that they will eventually make there way to most of the tools
but as is the plier head of the ST300 won't allow the Surge to close completely as another of our members here I believe DaveK tried it for fun and the tool won't close all the way but it will only take a little modifying and we will see it on other tools in the current lineup 
I did, and you remember right Poncho

The ST 300 plier heads are basically too wide to allow the Surge to close up properly. Other than that it looks a great idea though!



-
Thanks to chako a club i can now proudly join


-
I'm waiting for the MUT sheaths to be available - supposed to fit the ST300 among other tools :)
-
Should I join the secret club?!
I edc the Core and I LOVE IT. Browsing some comparisons between the Core and ST300 I found people saying that the the ST is a big step up. Since I already love the Core....is it possible to love something toooooo much??
Anywho, I was thinking of doing a mod that had nothing to do with either tool but I have another idea for a ST300 mod that might beat out my other idea for the time being.Question is- PT-540 mod or ST300 mod?
(wow, this isn't a biased thread to ask that question :D)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login