The difference between a Charge ALX and Ti is painfully clear
-
Yes, bang on Bob.
I took a real close look and couldn't see any visible differences in the plier heads. However, upon inspection, I can see a very subtle difference in the handle plate. It does not look like a manufacturing defect though.
Take a look at the red arrow on the right hand tool. That is the Ti with the smaller handle spread. If you compare that section to the one on the left, you can just note a change in thickness and angle of the steel of the stop point.


-
Great spot!

Yet another mystery solved by CSI-MTorg

-
@Chako said:
Yes, bang on Bob.I took a real close look and couldn't see any visible differences in the plier heads. However, upon inspection, I can see a very subtle difference in the handle plate. It does not look like a manufacturing defect though.
Take a look at the red arrow on the right hand tool. That is the Ti with the smaller handle spread. If you compare that section to the one on the left, you can just note a change in thickness and angle of the steel of the stop point.


You're talking about the width between the straight side and the angled side of the steel?
-
If you continue just past the red arrow, you see that joint where the handle plate takes a bend to form the seat where the plier head will rest. Well on the Ti, it is shallower and thinner than the one on the left which is the XTi. This small change means the Ti, or should I say My Ti's handle do not open as wide.
Before this thread, I never compared them in such a way. I was surprised to find out that mine exhibited the same characteristics as the OP's. This makes me wonder if more Charge Ti's are like this, or even if more models are like this. Did Leatherman make the handle plate, or was it outsourced? Did they make them like this for a short period of time? There are plenty of questions that I dont have answers to.
-
That is what I thought, the metal the triangle/arrow shape slides into. Good eye, I know I wouldn't have ever noticed that.
-
Wow!
Less than a day and the phenomenon is nearly completely investigated and explained! That's amazing!
Now, the next mystery: Why does Ben have girly hands. ???
;) :D
-
Because I use Fairy...
-
Since I don't have any Charges :'( :D I was wondering how the Wave stacked up to the Ti in terms of the handle width
since all it was originally was a fancy Wave :) -
-
On my TTI the area that is being referred to as the "stop point" does not touch when the pliers are closed. If I close the jaws and look at a light I can see through that area.
If I squeeze the handles hard that area closes up as the jaws flex but if I just close the pliers it is the tip of the pliers that touch. I imagine this is to prevent over-flexing the plier head/jaws.
That makes sense to me. I want my pliers jaws to close all the way. I don't want a "stop point" to hinder my ability to squeeze whatever I am pliering (is that a word?).
Sorry to be the only dissenter here but re-check your Charges and see if mine's an oddball. If it is I'm glad mine is this way and it's all of a sudden much more valuable to me.
-
Mine isn't a TTi, it's the older Ti.
I don't think the TTi has the same issue. (But your TTi is still "special" for you... ;))
:D
-
-
Okay, Reading this thread again I realize that the red arrow picture does seem to explain this phenomenon. It's the blue circle picture that I'm disagreeing with.
But now I realize that it (blue circle) is a stop point just not the kind of stop point I was thinking of and it may also explain the phenomenon.
so
I'll shut up now... except to say that the Original Wave is the "pinchingest" too I own.
-
@J-sews said:
There must be a slight difference in the stop point on that one.
It wouldn't take much of a change there to result in the handle-closeness differences you are finding.
@ratslash7 said:
Okay, Reading this thread again I realize that the red arrow picture does seem to explain this phenomenon. It's the blue circle picture that I'm disagreeing with.But now I realize that it (blue circle) is a stop point just not the kind of stop point I was thinking of and it may also explain the phenomenon.
so
I'll shut up now... except to say that the Original Wave is the "pinchingest" too I own.
Yeah, I think you got it now.
The "stop" point I was referring to with the blue circle is where the plier jaw opens and stops against the handle sheet metal. -
Sometimes it takes me a while to catch on. There's some good information in this thread that has caused me to study my TTI a little closer. It's a remarkable bit of engineering isn't it. Even if it does hurt on occasion.
-
Here's a pic of the damage (a couple days' after the "attack")

-
Hey! >:(
It hurt at the time... :'(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

