Super Tool 400
-
I dig the scissor idea, but they'd have to forego one of their half dozen flatheads or something. I think they should shave the philips down on both sides so it is the same thickness as the blade. An exterior lanyard would also be a slight improvement. This way they can fit at least one more tool
-
I don't want scissors in the supertool. I seldom have a need for scissors, and if i really needed it I could just use a knife. besides, not sure how well leatherman does scissors, the scissors on my Micra are pretty meh compared to my SAK classic
-
I think the ST range has always been aimed at the industrial market so good for site work, so for me personally it has all the right tools for the job, i carry a micra everywhere so no real need for scissors on my other tool,
plus as far as i know LM have never really changed the tools on the ST, but i wonder if a bit driver like the charge/ wave etc would work ???paul
-
@zed6309 said:
I think the ST range has always been aimed at the industrial market so good for site work, so for me personally it has all the right tools for the job, i carry a micra everywhere so no real need for scissors on my other tool,
plus as far as i know LM have never really changed the tools on the ST, but i wonder if a bit driver like the charge/ wave etc would work ???paul
slipped my mind to mention the bit driver! I think that would be a fine replacement for a small/med flathead. If you so choose to have those flatheads, put the bit in(granted there won't he as much reach) :-\
-
If they added scissors it wouldn't be a SuperTool anymore. It'd be a Super Blast or something.
-
You can probably swap a scissor from fuse/blast if you want it.
-
@Spoonrobot said:
If they added scissors it wouldn't be a SuperTool anymore. It'd be a Super Blast or something.Yeah I think a SuperTool is what it is and aside from cosmetics needs to stay that way ;) But I am all for another model to come out with a similar layout with scissors added

-
I just want to see...
SURGE II 
I have been waiting... patiently.. but my patience is wearing thin. The Surge is way past due for a revamp.
It would be a Surge I, but with the ST300 plier head and lock release levers, a sleeker look at the pivots, slightly better fit and finish, old Wave style scissors mounted inside, two outside mounted exchangers for file and saw, maybe Charge type scales, and...
...the hammer end from the MUT.
WANT.
DELIVER IT NOW!
DO YOU HEAR ME LEATHERMAN!
Don't make me angry... you wouldn't like me when I'm angry.
-
@glorn said:
I just want to see...
SURGE II 
I have been waiting... patiently.. but my patience is wearing thin. The Surge is way past due for a revamp.
It would be a Surge I, but with the ST300 plier head and lock release levers, a sleeker look at the pivots, slightly better fit and finish, old Wave style scissors mounted inside, two outside mounted exchangers for file and saw, maybe Charge type scales, and...
...the hammer end from the MUT.
WANT.
DELIVER IT NOW!
DO YOU HEAR ME LEATHERMAN!
Don't make me angry... you wouldn't like me when I'm angry.
yeah do it LM or he will turn green :D

-
Hurry Leatherman... I see him putting on his purple pants!! :ahhh :ahhh

I don't see the need for 2 blade exchangers on the Surge personally, but the ST300 plier on the Surge would be sweet. And maybe the hammer end. And possibly lose the driver exchanger for one medium size fixed flathead, and a good length, Core style phillips. In my mind, the Surge is for heavy use, so the bit exchanger is a goofy concept. :-\
-
Personally I think that the 400 should be a full-blown kickback to the Original SuperTool.
Take the same older design, make it so that your hands dont bite into the handles when you squeeze and also add on some of the locks that the 300 has and then you have the old-tested design with the newer, better locking mechanism.
Maybe, just maybe they could put all of the tools on the outside of the handles and keep them secured with some kind of detent design.
I dunno, just some ideas I'm throwing out there.
Realistically though I don't really see how all of these ideas could come together and form a practical design.
Maybe Leatherman would be tramping on the Victorinox SwissTool's design if they did this too.
But as for your idea for the 400, I mean the only real differences between that and the Surge would be the Plier head and the fact that the Surge's blades are on the outside.
I think that maybe Leatherman has thought about putting scissors in the SuperTool lineup, but maybe for some reason in their findings they found that more people didn't want, care for, or need scissors in the New SuperTool. Plus maybe their thinking was that it was supposed to be a kickback to the Original SuperTool.
IMHO, I really kind of want something more slim, such as how slim the Original Was-Only with the locks for the blades that were more convenient than the ones on the Original.
-
@getpower said:
Personally I think that the 400 should be a full-blown kickback to the Original SuperTool.Take the same older design, make it so that your hands dont bite into the handles when you squeeze and also add on some of the locks that the 300 has and then you have the old-tested design with the newer, better locking mechanism.
Maybe, just maybe they could put all of the tools on the outside of the handles and keep them secured with some kind of detent design.
I dunno, just some ideas I'm throwing out there.
Realistically though I don't really see how all of these ideas could come together and form a practical design.
Maybe Leatherman would be tramping on the Victorinox SwissTool's design if they did this too.
But as for your idea for the 400, I mean the only real differences between that and the Surge would be the Plier head and the fact that the Surge's blades are on the outside.
I think that maybe Leatherman has thought about putting scissors in the SuperTool lineup, but maybe for some reason in their findings they found that more people didn't want, care for, or need scissors in the New SuperTool. Plus maybe their thinking was that it was supposed to be a kickback to the Original SuperTool.
IMHO, I really kind of want something more slim, such as how slim the Original Was-Only with the locks for the blades that were more convenient than the ones on the Original.
other than the pliers isnt the st300 kind of like the old one, it does have its looks but without the discomfort , same tools,
paul
-
this does make me wonder...

If they were to put outside tools on the ST400, wouldn't that just make it another surge?
I highly doubt LM would deviate from the original ST design because then it would just be a different tool altogether.
That being said, a redisigned surge would fly in my book
ST300 Pliers,
Charge style handles,
I dig the massive scissors on the outside but some people just don't use/prefer scissors, perhaps make the scissors part of the blade exchanger...
Idk about you guys but I loathe the serrated blades. The only reason I would keep it is if they put the hook on the backside. so I hope they either do that or ditch it altogether -
I find nothing lacking in the ST300 and I too carry a micra.
-
-MUT appearance with the hammer bottom
-a scaled up Wave like tool selection
-Beefed up scissors
-Long shank Bits for the bit exchanger
-Different steels and//or a better polish job on key places to finally get rid of the rust issue
-Assembled with regular torx bitsGets me all worked up just thinking about it.
-
I'd rather they spend the money on making the PST III
-
A tool with the original looks of a pst with locking tools would be a great idea, but I think they would see that as a step backwards.
-
I don't think the bit driver is a good idea on an industrial type tool . All I would change is the thickness of the sheetstock in the handles .
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login