Re: MINI Problem
-
@Poncho65 said:
Bad luck Dennis :-\ Is it an older no datecode 1 like that of Neil's? If so probably an early problem of the :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh Is the file a tad thicker than another of your :ahhh :ahhh :ahhh !!!!MINI's!!! :ahhh :ahhh :ahhh
That might be it but can't tell for sure in the pics :)Yes, it is a no date code or hard wire notch mini. I can't tell if there is any difference in the files. if there is it is'nt much
-
Bad luck Dennis :-\ Is it an older no datecode 1 like that of Neil's? If so probably an early problem of the :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh Is the file a tad thicker than another of your :ahhh :ahhh :ahhh !!!!MINI's!!! :ahhh :ahhh :ahhh
That might be it but can't tell for sure in the pics :)Yes, it is a no date code or hard wire notch mini. I can't tell if there is any difference in the files. if there is it is'nt much
Perhaps it is just enough that it makes the file rub
Cause the 2 I have the plier head is very close to the file but just barely away so any thicker even perhaps a 1/2 mm or less and it would touch :o It's good that they seemed to have fixed it in later 1 anyway :) -
I can't find any significant difference in file size but the plier head does appear to be around 0.1mm thicker at that point on the older version.
-
-
That's a mini problem?! I've got a mini problem for you - I DON'T HAVE A :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh!!!11eleven!1
-
@WH867 said:
Picked up another Mini this week. This one has a slight problem. When I opened it up to look it over my first thought was that somebody took a grinder to one side of the plier head. But then I noticed that everytime the tool is opened and closed it rubs the file bad. I'm not sure why because nothing looks bent to me. Here's a couple pics. It looks much worse in person.Maybe the pivot hole through the plier head wasn't drilled quite square with the faces? (causing it to close on a slight angle) :(
-
If you send in your Mini for a little work you might not recognize it when it gets back :( :)
:D . Besides the file rubbing the plier pivot had a lot of play and one side of the handles was very loose. So I decided to send it in.

-
WTF :o
-
I would be pretty upset. Did you ask them to send it back if they couldn't sort it out?
-
I did always wonder what they would replace 1 with but I never figured a Kick :( Remind me to never send 1 of mine in I will just keep them for spare parts if nothing else :-\ Sorry to hear it Dennis :-[
-
Mate they gave you the spiky end of the Pineapple >:( >:( >:(.
Kick for a Mini :ahhh :ahhh :ahhh :ahhh -
I guess it is the closest match. :(
-
If you compare them both, the Kick comes ahead in functionality. Loses in folded size, discontinued production, and cult status.
I myself wouldn't be happy with a Kick for the Mini simply because a mini is well....a mini!
I think the Kick would be more appreciated if it came with a pocket clip instead of having one as an accessory.
-
@Fisting_Chili said:
I'm taking it that most here are not too impressed with the Kick? No wonder I see them so cheap on ebay. Bummer about the switcheroo...There's nothing wrong with a Kick but its not a .... :ahhh :ahhh :ahhh !!! Mini !!! :ahhh :ahhh :ahhh
-
I suspect many non-MTorg neandertals do not place much value in the Mini and would probably consider the Kick to be an upgrade. :-\
But they should have asked you first Dennis >:(
-
Bummer Dennis.
-
I'm sorry for your loss. I don't see how they get kick from mini.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
