Victorinox Alox Pioneer - knowledge book
-
-
Very impressive mate

-
-
-
Superb mate. Bookmarked the page for future reference.

-
Interesting- I have what appears to have once been a gold Pioneer with the older style awl and a tang stamped FISCHER on it:
http://sosakonline.com/index.php?option=com_content&task=view&id=287&Itemid=35
Have you come across any info on something like that?
Also, this info needs to be put on www.SAKWiki.com for everyone to enjoy!
Def
-
Oh, and here's the info I have on my gold one, as supplied by a member named Josh:
Defender;
I read your article about the Fischer-stamped Soldier, and I found some information for you.R.M. Fischer is a distributor in Estonia (not Lithuania, as some thought). The new company is still located in Estonia and serves all of the Baltic region. Their #1-selling product is Victorinox poxket knives. However, the knife you have is from the earlier company. Like other distributors (Victor, Kellam, etc.) they stamped their name on the tangs of some of the knives they distribute. The gold-colored anodizing you see is actually brass anodized over the aluminum handles. This makes the brass more corrosion-resistant, while doing very little for the aluminum (since aluminum doesn't tarnish much at all) except make it look nicer. This was likely done second-hand and not by Victorinox. Fischer stopped anodizing their products in 1973, but that doesn't mean that they did it. It could've been done at home or in a shop somewhere as a project.
The model you have, with the rounded awl and cut-away handle scale, was made between 1966 and 1973. It sold for about $11 in 1969, and if it were in new condition, it would be worth about $110 now. That's including the brass anodizing. My source for all of this is a very nice, very old man who has enough old knife books to rival Case Cutlery. Hopefully, this has helped you in establishing where your knife is from, and what it is.
Josh
I don't know if any of this helps the info you have amassed or not, but that's what I've been told.
Def
-
-
I have some doubts about some infos. The old style awl was made between 1957 and 1960. If you look at the old yellow catalog page you can see the handwritten year 1958 in the upper right corner.
From 1961 Victorinox used the newer awl, also in the new soldier knife.
If the Fisher knife was made later in the 60s, they must have used older parts, but it does not really make sense.And I don`t think that alox knives were eloxated or anodized after they have left the factory in Ibach. That would not make sense either.
-
Superb -
That's an amazing piece of work...

-
@duder said:
I have some doubts about some infos. The old style awl was made between 1957 and 1960. If you look at the old yellow catalog page you can see the handwritten year 1958 in the upper right corner.
From 1961 Victorinox used the newer awl, also in the new soldier knife.
If the Fisher knife was made later in the 60s, they must have used older parts, but it does not really make sense.And I don`t think that alox knives were eloxated or anodized after they have left the factory in Ibach. That would not make sense either.
That's what I was thinking as well. Anodizing the knives after they left the factory would mean they'd have to be disassembled, have the factory anodize stripped off, re-anodized and re-assembled. That's what Bill had to do when he created these:
So, unless the knives were shipped in pieces, and the scales weren't anodized at the factory, it would have involved a lot more work.
Since Victorinox didn't crank out nearly as many pieces then as they do now, the possibility exists that they had some old stock components within a year or two of the new style being introduced, but any more than that and I think the likelihood drops off significantly, so I wondered about the possibility of a "special" model being done 6 years after the awl design was changed, and quite frankly, I don't see that either. A special run model like that would have cost quite a bit more, and with no serious collectors in that era to support special runs, I just don't see it happening.
Still, as it's the only info I had to go on, and no actual proof to back up my claims, I found it hard to argue with their findings.
Def
-
@duder said:
I have some doubts about some infos. The old style awl was made between 1957 and 1960. If you look at the old yellow catalog page you can see the handwritten year 1958 in the upper right corner.
From 1961 Victorinox used the newer awl, also in the new soldier knife.
If the Fisher knife was made later in the 60s, they must have used older parts, but it does not really make sense.And I don`t think that alox knives were eloxated or anodized after they have left the factory in Ibach. That would not make sense either.
Thanks for extras about the old awl. Do you have any pictures?
I don't have any further information about the Fisher company and still looking for any documents or info.
-
@Grant Lamontagne said:
Oh, and here's the info I have on my gold one, as supplied by a member named Josh:Defender;
I read your article about the Fischer-stamped Soldier, and I found some information for you.
R.M. Fischer is a distributor in Estonia (not Lithuania, as some thought). The new company is still located in Estonia and serves all of the Baltic region. Their #1-selling product is Victorinox poxket knives. However, the knife you have is from the earlier company. Like other distributors (Victor, Kellam, etc.) they stamped their name on the tangs of some of the knives they distribute. The gold-colored anodizing you see is actually brass anodized over the aluminum handles. This makes the brass more corrosion-resistant, while doing very little for the aluminum (since aluminum doesn't tarnish much at all) except make it look nicer. This was likely done second-hand and not by Victorinox. Fischer stopped anodizing their products in 1973, but that doesn't mean that they did it. It could've been done at home or in a shop somewhere as a project.
The model you have, with the rounded awl and cut-away handle scale, was made between 1966 and 1973. It sold for about $11 in 1969, and if it were in new condition, it would be worth about $110 now. That's including the brass anodizing. My source for all of this is a very nice, very old man who has enough old knife books to rival Case Cutlery. Hopefully, this has helped you in establishing where your knife is from, and what it is.
Josh
I don't know if any of this helps the info you have amassed or not, but that's what I've been told.
Def
Thanks, Def! It is very helpful!
Could you please contact Josh and ask if he could contact his source for any kind of documents or old catalogs regarding the Fisher knives?
Cheers
Paul -
Does anyone have a physical example of the single blade electrician model?
-
-
-
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
That's a cool load of info. brought together there, hats off to you sir 
