Grappler -versus- Crunch
-
Thanks to those who caught my "Charge" typo in the second paragraph.
All fixed now. :) -
@valvestem125 said:
Great pics of the Multi-Tools, and great review as well.I noticed in pics #9 & 10 that you have a "toe ring" on your big toe, very cool. :D
Toe ring?! I'll give you a toe ring.... >:(
:D :D -
I didn't even know gerber had a contender...
What is the material for the file on the Grappler?
After some use the point might go to the Crunch if the Grappler goes blunt and gets gummed up.
The Gerber folks at Shot told us that the file blade was not as brittle hard as file blades normally are, so that it would not shatter when used as a flathead screwdriver.
-
I liked the feel of the Grappler at SHOT, and I'm looking forward to playing with one eventually. It really did seem like a nice tool, although I had the same thoughts as Bob about the ease of use with the plier head. Still, having only a few minutes to play with something at the show, and nothing to actually test it on makes for a very poor review, so I'm looking forward to (eventually) getting one and putting it through it's paces.
I'd also like to note that I initially felt the Crunch was awkward to use as well, but after some practice I could flip it open and closed almost as good as this:
:D
Who knows- in time I could be flipping a Grappler around as easily!
Def
-
:o
My Crunch is a bit stiff to be doing that.
Well I did order a Grappler. Still can't wait to get it in. You can bet there will be plenty of photographs when it does reach my door. :D
-
Top stuff Bob . I very much would like a Grappler as my favorite MT is my Schrade 6LC a Vise grip MT.
I wonder if I will have any birthday $ left over in a week or so
:D :D -
Nice review.
I have to say I don't see any reason for me to switch from the Crunch. This may sound weak, but the bulk of my Crunch-use is opening bottles that I can't get my hands to grip. If the Grappler can't open any wider than that, then there's no way it can do what I need it to do. Crunch all the way.
-
I've just spotted this review Bob - excellent job - very informative.
Thanks

-
@J-sews said:
When it comes to phillips screwdrivers, the longer one is usually the preferred one. But after testing both on a variety of different screws around my house, I chose the Leatherman over the Gerber. Its three-dimensional shape just "fits" the screws better. The flat phillips works mind you, but it tends to "cam out" when the going gets tough. :-\
:)
I have found that many so-called phillips drivers are too pointy. I bet if you flattened the phillips tip slightly, it would take more to cam out.
Excellent review. I'll keep my crunch though.

-

:)
[/quote]
I have found that many so-called phillips drivers are too pointy. I bet if you flattened the phillips tip slightly, it would take more to cam out.
The pointy one is a Reed & Prince tip,the Phillips is flat on the tip.

-
Right. But most of the cross head fasteners I come across border on cheap Chinese crap, and are even sloppier than they should be.
Also, a blunt tip should still operate a R&P. :) -
thanks for all the info bob.
-
Good write up/pics. One thing about both of these is the lack of tool componentss compared to other MT's, and they cost more. Obviously they have to have less due to the locking plier mechanism, Gerber should have put a saw blade on the ruler, to up the ante.
-
Well i have been edc-ing my Grappler for 3 weeks now.
in short
-i would pick it over the crunch anytime
-the one thing i hate about it is the bladeYou can set it up so it makes an excellent set of pliers and the locking option makes it a great alternative to sog's compound leverage
short and sweet
-
I still like the look of the Crunch more. I wish I could afford it right now, but there are too many others in line. Gotta get a LM Pulse first. I think that if I did end up with a Crunch, I would consider carrying it along with my Blast or Swisstool in situations where I would definitely be working on something. Other than that it would stay in the bag.
-
@Mr. Whippy said:
Back to seriousness for a second:For me, locking pliers have the downside of being slow to reapply. The upside is you can put a tremendous amount of grip on a bolt/nut in situations where there isn't a good socket/wrench solution. I've been known to put a 4 foot piece of pipe on a visegrip to turn a frozen nut. Either the nut turns or the bolt breaks, but either way the parts are coming apart.
Now I wouldn't put a 4 foot pipe on a Crunch, but I might put a 2 foot cheater bar on it.
From the sounds of it, the Grappler may not be able to withstand that much torque. Is that the gist of the jaw strength comment Bob?
I've used a crunch to pop off the rear axle on a few motorcycle, I had to stand on it on some bike that you actually tighten the axle nut on, on all my bikes the axles use a cotter pin to keep the nut from coming off, so for those I simply hand tighten instead of using a torque wrench. This way I can remove the axles with a short wrench and the crunch is perfect for that.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




