First go at wooden scales,
-
Hint one... if you can smell it, you're breathing it; dust masks are your best mate :D Not the end of the world with most of the bits of wood you're likely to find kicking around in your shed but some of the exotics can be quite nasty :ahhh
Hint two... if your work environment ends up like Dave's garage last year buy an extra fire extinguisher :P
-
@Neil said:
Hint one... if you can smell it, you're breathing it; dust masks are your best mate :D Not the end of the world with most of the bits of wood you're likely to find kicking around in your shed but some of the exotics can be quite nasty :ahhhHint two... if your work environment ends up like Dave's garage last year buy an extra fire extinguisher :P
yeah i did get the what is that smell when angie came in from work ::) i said hmm i dont know
ok mask check ive got them in my shed, i should of had one on as i did feel it later, and my kitchen probably not the best place but sadly the only place at the moment , but very good tips neil 
-
In all seriousness if you can do it outside it saves a hell of a lot of cleaning up

-
:D
That dust has buggered up my belt sander now. It wouldn't be so bad, except I owe Dennis a custom scaled SAK which he's waited months for :-[
I think I might have to bite the bullet and get a new one, as it's a cheap one and I can't find any replacement parts for it (don't ask why I need parts, suffice it to say that whilst "servicing" it, it bit me, and I exacted some revenge)......
Worse than that has been the missus' reaction though. It was getting all those climbers for last year's meet done that's to blame :D
-
That all sounds expensive Dave :-\
neil outdoors is a good option once the sun comes out, roll on the summer

-
OK one more thing, what glue should i get friday, i think i read epoxy resin is ok, ???
paul
-
Yeah - I use Araldite.
-
:D
-
Mine still sat next to my computer

-
some of the exotic woods ARE nasty, from when i was researching making a guitar i found out a few that your want to wear protection when working with.
this should cover most of them
http://www.hse.gov.uk/PUBNS/wis30.pdf
the last page
-
That looks really good Zed! I have got to remember to start taking pictures of my mods and builds as I do them. I did a Vic Classic in wood scales a couple weeks ago and I should have posted it. Next one for sure!
-
@gadgetguy35 said:
That looks really good Zed! I have got to remember to start taking pictures of my mods and builds as I do them. I did a Vic Classic in wood scales a couple weeks ago and I should have posted it. Next one for sure!cheers mate, and yes post them up i need ideas

-
Great work mate.
;) -
That looks really good Zed! I have got to remember to start taking pictures of my mods and builds as I do them. I did a Vic Classic in wood scales a couple weeks ago and I should have posted it. Next one for sure!
cheers mate, and yes post them up i need ideas

For my first wood scale mod, I kinda cheated. I took a cheap freebie SAK classic knock off with wood scales that were way too big, and I sanded them to fit a real classic. I had to reprofile the ends and adjust the cutouts so it was like starting a mod halfway through. It ended up ok, but nothing to write home about.
I then proceeded to disassemble a Vic Camper, cleaned it, and reassembled it as a Spartan. It worked very well except I over peened the backspring tools rivet, so they bind slightly. I am practicing more and more. My very first mod was a Cybertool 34 turned Supertinker with cyberdriver in it. Rotokid had to fix that one, as I had no spare pinstock and no real idea of what I did wrong.
-
That looks really good Zed! I have got to remember to start taking pictures of my mods and builds as I do them. I did a Vic Classic in wood scales a couple weeks ago and I should have posted it. Next one for sure!
cheers mate, and yes post them up i need ideas

For my first wood scale mod, I kinda cheated. I took a cheap freebie SAK classic knock off with wood scales that were way too big, and I sanded them to fit a real classic. I had to reprofile the ends and adjust the cutouts so it was like starting a mod halfway through. It ended up ok, but nothing to write home about.
I then proceeded to disassemble a Vic Camper, cleaned it, and reassembled it as a Spartan. It worked very well except I over peened the backspring tools rivet, so they bind slightly. I am practicing more and more. My very first mod was a Cybertool 34 turned Supertinker with cyberdriver in it. Rotokid had to fix that one, as I had no spare pinstock and no real idea of what I did wrong.
I wouldn't worry about it mate, it's all a learning curve. With a little more practice you'll get a good feel as how much more peening is needed. Until then: hit-check-hit-check-hit-check-hit-check-etc. It takes a bit longer but you shouldn't end up with binding tools that you'll want to re-do.
If it bothers you, you could always just remove the one pin. Neil did a good guide here;
/topic/9057
-
Nice one buddy. :)
-
That looks really good Zed! I have got to remember to start taking pictures of my mods and builds as I do them. I did a Vic Classic in wood scales a couple weeks ago and I should have posted it. Next one for sure!
cheers mate, and yes post them up i need ideas

For my first wood scale mod, I kinda cheated. I took a cheap freebie SAK classic knock off with wood scales that were way too big, and I sanded them to fit a real classic. I had to reprofile the ends and adjust the cutouts so it was like starting a mod halfway through. It ended up ok, but nothing to write home about.
I then proceeded to disassemble a Vic Camper, cleaned it, and reassembled it as a Spartan. It worked very well except I over peened the backspring tools rivet, so they bind slightly. I am practicing more and more. My very first mod was a Cybertool 34 turned Supertinker with cyberdriver in it. Rotokid had to fix that one, as I had no spare pinstock and no real idea of what I did wrong.
I wouldn't worry about it mate, it's all a learning curve. With a little more practice you'll get a good feel as how much more peening is needed. Until then: hit-check-hit-check-hit-check-hit-check-etc. It takes a bit longer but you shouldn't end up with binding tools that you'll want to re-do.
If it bothers you, you could always just remove the one pin. Neil did a good guide here;
/topic/9057
I thought about removing just the one pin, and then a very vivid reminder came to me, an image of the corkscrew and small blade shooting straight out of the knife as I tried to preload the knife spring. Still haven't found that corkscrew... Maybe I should check the ceiling!
-
That is genius! I just checked out Neils walk through, and I think I will try it on my spartan as soon as my pin stock arrives from Tom in the mail. the mod I am getting back from him has a back spring Phillips that I want to swap for a corkscrew, problem is, the knife is a four layer with a cybertool layer in it. Hints/tips would be welcome!
-
@gadgetguy35 said:
That is genius! I just checked out Neils walk through, and I think I will try it on my spartan as soon as my pin stock arrives from Tom in the mail. the mod I am getting back from him has a back spring Phillips that I want to swap for a corkscrew, problem is, the knife is a four layer with a cybertool layer in it. Hints/tips would be welcome!I have to admit the thickest SAK I've done this on was just two layers so I'm not sure how easy four layers would be. A good general tip though is to make sure that you put a long, thin taper on the rod to be tapped into place. It means that the liners and tools don't have to be absolutely perfectly lined up, just very nearly so. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login