Best Awl Design and Shape?
-
I think the Surge has a decent awl, but I gotta give my vote to the Spirit as well. I've drilled some nice clean holes really fast with that thing. You say you work with plastics a lot: I used my Spirit awl to drill a small water drain hole in my car's spoiler (GM ::) ) and it took like 2 seconds to make a small perfectly clean hole.
On a side note: need to see the rest of that 510 lol.
-
*Thanks for the photos Mat! Here is the Awl Bit for my Skeletool. It is more or less a mini version of the spirit awl (similar shape, profile). It is rather short and stubby but very effective as I made it with double sharpened edges. Part of the goal when making it was that it fit into the card for the bit kit.....
~ evil ~
BTW Mat, did you ever pick-up your airbrush yet?*

-
Evil one how do you store your Skeletool's 'sting'
:D :D :DBob/J-Sews did a pretty cool awl mod as well;
/topic/1111I am waiting too hear back from the AirBrush web store :( , everything has been closed in OZ since Thursday :D :D
-
@MultiMat said:
Evil one how do you store your Skeletool's 'sting'
:D :D :DBob/J-Sews did a pretty cool awl mod as well;
/topic/1111I am waiting too hear back from the AirBrush web store :( , everything has been closed in OZ since Thursday :D :D
*That mod came out very nice and sure would have saved me a few steps, not to mention time lol. Oh well, I don't mind fabricating from scratch, it's what I do all the time anyway. The Skeletool project is just about done so I have been focusing on making enough custom bits to fill up both cards in the bit kit that I will actually use .....
~ evil ~*
-



are you now AWL struck with the AWLsomness
-
Y'awl took some nice photos there

-
Great pics Yud.
-
But which is best overAWL?
-
Hmmm...
I have two MTs that I absolutely love the awl on more then all the others. Oddly enough, they aren't very expensive tools, but I think they got it right. These two tools have a very long pointy and sharp awl. I like the length, and have found that the long design can be used for so many other tasks. I have used the one tool outdoors a few times, and I was very impressed with this style awl.
The two tools I am talking about are the Outdoor Edge Trek Tool, and the Coast Pro Pocket Fishing Pliers.

From left to right, Victorinox Soldier, Trek Tool, Leatherman PST.
And here we have both the Pro Fishing Pliers and the Trek Tool .

-
*Hey Chako, I am liking those awls. I am curious, how long is the longest awl and does it have a sharpened edge? Thanks! Gonna start the cutting hopefully tonight.....
~ evil ~*
-
The longest, being the Coast tool, is 2.5" long.
These do not have a sharpened edge. They do have a very sharp point and the body is square after the initial taper.
-
Another vote here for the awl on 93mm SAKs

-
*With the aid of all of your input and photos, I mixed and matched ideas and came up with an awl solution that I think will work great for me. I started off with metal better than that of the standard Wave blades, so it should be able to handle the abuse it will see. I went with a long, slender awl... just a hair over 2.5 inches. I noticed that the majority of awls sharpen the same edge so that it cuts when turned clockwise. In order to have clearance for the plier head, I had to sharpen the opposite edge (some SOG's are sharpened like this?). This turned out to be a blessing in disguise as I am naturally left handed. I tapered the thickness at the tip, similar to a Spirit, but not so much so that the tip would lose strength. The tip itself... I did a mild version of the beveled tip of a SOG (only 1/8 inch). There were definitely some clearance issues to deal with. If I wanted a short stubby awl, the process would of been straight forward. Since I wanted a larger, more substantial awl, I had to make a notch on one edge to get it to sit flat inside the tool. It is so long and wide that it overlapped the flat part of the scissors handle, which I will have to reshape tomorrow so there is no interference. It is a supertight fit but managed to utilize every bit of extra space in there. The large flathead driver (which I may still replace) got moved to the other handle next to the large bit driver. I wanted all things screwdriver related on the same handle. The awl is where the large flathead driver was. I am eliminating the small bit driver altogether as I will never use it because I have a complete set of double ended precision screwdrivers I made to fit the large bit driver. So... now I have the extra spot where the small bit driver was. Debating on what I will put there. Oh, also, anyone have any Surge scissors they are willing to sell or trade? Time permitting, in a day or two I will have finished and cleaned up the install. Afterwards, I will post pics. Thanks again you all!!
~ evil ~*
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login