Some help, please!
-
remember i saw the same sak but was a hoffriz camper or something like that ???... no clue of this one
very very nice knife carlos congrats

-
Its actually called the Original "Outdoorsman" according to James Christian's website for his personal gallery of his collection.
Your seems to be an Elinox variant. I have the standard Victorinox one shown in James Christians photo.
-
@stressmaster5000 said:
Its actually called the Original "Outdoorsman" according to James Christian's website for his personal gallery of his collection.Came here to say the same - this is the original Outdoorsman, not to be confused with the 1990s Marlboro knife of the same name. This is an older one, probably made c. 1970-1973 judging by the tools. Vic made this knife from the 60s into the early 80s at least, but up until 1974 is was in the Elinox line. After 1974 it seemed to go into the main Victorinox line (I have the same knife in an early 1980s Victorinox version).
-
That's a nice rare SAK you've got there, look after it well

I have a similar one but minus file and scissors. I call it a pruning camper but I doubt that is its actual name :)
-
@jazzbass said:
This is an older one, probably made c. 1970-1973 judging by the tools.One thing to add to date it a little better - older Elinox knives didn't have polished tools. Those closer to the end (1974) did. The most obvious tools to look at are the can opener and caplifter. If they are rough machined, it's probably closer to the 1970 date. If they are polished, then it's probably closer to the 1973 date. I would date it 1973 at the latest, though, as many tools changed around 1974 and you have the older version of all of them (scissors, file, main blade, corkscrew, caplifter).
-
Thank You Gentlemen!

You've been alot of help
And following jazzbass comments, I checked the tools and they aren't polished, so it would be closer to the 1970 date.Carlos
-
Its actually called the Original "Outdoorsman" according to James Christian's website for his personal gallery of his collection.
Came here to say the same - this is the original Outdoorsman, not to be confused with the 1990s Marlboro knife of the same name. This is an older one, probably made c. 1970-1973 judging by the tools. Vic made this knife from the 60s into the early 80s at least, but up until 1974 is was in the Elinox line. After 1974 it seemed to go into the main Victorinox line (I have the same knife in an early 1980s Victorinox version).
Great SAK Carlos

Wealth of knowledge, thanks guys. What were the differences between the Elinox and Victorinox lines? Economy and regular? Thanks again, V.
-
Hi
Elinox is Economy or Eco,
Very nice knife! Should be around 1970 or like JazzBass says, The Camping and Cross and shield looks like inlay. I was hoping that it can be checked to see? It is the old emblem with lines from the cross.NM
-
@donvito said:
Great SAK Carlos
Wealth of knowledge, thanks guys. What were the differences between the Elinox and Victorinox lines? Economy and regular? Thanks again, V.
For the older 84mm and 91mm models, the Elinox line was the "economy" line. They didn't polish the tools, the liners weren't anodized, the scale material was (originally) cheaper*, and I read somewhere that they didn't individually inspect each knife.
Elinox is Economy or Eco,
Very nice knife! Should be around 1970 or like JazzBass says, The Camping and Cross and shield looks like inlay. I was hoping that it can be checked to see? It is the old emblem with lines from the cross.
NMIt's definitely an inlay. I have a Camper Pruner like Neil mentions above, which is a similar knife except it lacks the scissors and the file, and the scales are inlaid. Nickel silver inlays at that, which is to be expected with the age of the knife.
- If you look at an old pre-69 Vic - one of the ones with a bail - you'll notice the scales are a darker red material compared to the 69+ models. These dark red scales are denser, harder and significantly more heat resistant than the bright red ones. In 1969, Vic went to the key ring in the spacer and they started using the bright red cellidor for all knives, not just the Elinox line. This is why it's typical to see knives from the early 70s where the scales are warping - even for knives that are NIB. Warping is almost unheard of on the dark red scales. Elinox knives used the cheaper grade of bright red cellidor from at least the early 60s.
-
[/quote]
For the older 84mm and 91mm models, the Elinox line was the "economy" line. They didn't polish the tools, the liners weren't anodized, the scale material was (originally) cheaper*, and I read somewhere that they didn't individually inspect each knife.
Elinox is Economy or Eco,
Very nice knife! Should be around 1970 or like JazzBass says, The Camping and Cross and shield looks like inlay. I was hoping that it can be checked to see? It is the old emblem with lines from the cross.
NMIt's definitely an inlay. I have a Camper Pruner like Neil mentions above, which is a similar knife except it lacks the scissors and the file, and the scales are inlaid. Nickel silver inlays at that, which is to be expected with the age of the knife.
- If you look at an old pre-69 Vic - one of the ones with a bail - you'll notice the scales are a darker red material compared to the 69+ models. These dark red scales are denser, harder and significantly more heat resistant than the bright red ones. In 1969, Vic went to the key ring in the spacer and they started using the bright red cellidor for all knives, not just the Elinox line. This is why it's typical to see knives from the early 70s where the scales are warping - even for knives that are NIB. Warping is almost unheard of on the dark red scales. Elinox knives used the cheaper grade of bright red cellidor from at least the early 60s.
[/quote]
Yes,N.S inlay that makes all sence..
I agree also from my info the older "eco" was so, looks like the "Eco models" has gradually become almost in class with the original line, I have noticed the warping like you sad.
NM - If you look at an old pre-69 Vic - one of the ones with a bail - you'll notice the scales are a darker red material compared to the 69+ models. These dark red scales are denser, harder and significantly more heat resistant than the bright red ones. In 1969, Vic went to the key ring in the spacer and they started using the bright red cellidor for all knives, not just the Elinox line. This is why it's typical to see knives from the early 70s where the scales are warping - even for knives that are NIB. Warping is almost unheard of on the dark red scales. Elinox knives used the cheaper grade of bright red cellidor from at least the early 60s.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login