New tool reccomendation
-
@Kmarr said:
I like these replies.
So far we have Vic spirit and LM wave. I am not sure of the bit kit with the wave cuz I heard it might not hold up with heavy torque. And the spirit doesn't really have a big flathead. Where he work there is a lot of dustrial-size nuts- those can usually be handled with tools there, but he travels and should have a nice tool to handle those situations in absence of dedicated ones.What size and type of nuts? More so let me/us know some more details. The Vic Spirit has a better pliers. As for Torque, I beat on the Wave!!! But the Vic might be the ticket. I really like the pliers if you dont need a fine needlenose. The Vic is more blunt. Too be honest if you are going to do great torque I dont know if any will cover your usage. The Vic Phillips is good but if you have to go outside of the main one torque will be an issues.
More so, let us know the application. I carrier a Klein 11-1 driver and a Wave on certain sites and those two cover most of my needs. If not all.
-
what about a wave with extra bits for the driver, if it was me for site work though i would go for the ST300, its a bit lighter than the core and although still big its drivers are very long so will get in all types of nooks and crannies :D

paul
-
Darn it all!
My reply to SoapBoxPreacher's post didn't go thru! What I was gonna say is that I don't think my dad will run into industrial size nuts on a daily basis without a dedicated screwdriver close by. But in the rare case that it does happen, and the nearest screwdriver is 300ft away, its a good idea to have something with you that will do the job and not take so much of your time. I am skeptical of the LM bit driver and its ability to loosen frozen nuts.... -
@Kmarr said:
Darn it all!
My reply to SoapBoxPreacher's post didn't go thru! What I was gonna say is that I don't think my dad will run into industrial size nuts on a daily basis without a dedicated screwdriver close by. But in the rare case that it does happen, and the nearest screwdriver is 300ft away, its a good idea to have something with you that will do the job and not take so much of your time. I am skeptical of the LM bit driver and its ability to loosen frozen nuts....the drivers on the ST300/core are much more solid, plus could add the adapter, im still thinking about getting one instead of the extra bits,
-
You said that the Core was too big, but you want a 4.5" tool. The Core IS a 4.5" tool.
Is it a 4" tool (Wave, Charge, Spirit etc) that you're thinking about?
-
I'd be tempted with a Knifeless Fuse myself.
-
@DaveK said:
You said that the Core was too big, but you want a 4.5" tool. The Core IS a 4.5" tool.Is it a 4" tool (Wave, Charge, Spirit etc) that you're thinking about?
I said the core was a bit heavy. I was looking for lighter options of heavy duty tools, perhaps thinner than the BRICK that is CORE
-
i doubt your going to find a big tool thats light and slim somehow...
-
OK gotcha.....
Well, that rules the Swisstool out, and probably the Powerlock.
How about an original Supertool? That's a skinny version of the Core :)
-
I don't have any experience with the Spirt, but I can say that the Wave can take a fair bit of abuse. I have the different bits and cranked on it pretty hard loosening some old, rust screws. It can take quite a bit. I prefer the dedicated Phillips on the pulse though. I still need to get a Core...I think I'll like it.
-
The core is GREAT, you won't regret getting one. um, this wave is getting a lot of attention. I forgot about the powerlock, much slimmer than the core, but they have smaller philips and flat drivers :-
I could always give my dad an ultimatum and FORCE him to carry the core >:D -
Supertool I tells ya. Problem solved :)
-
woops forgot about that. I don't know too much about it.
MUST....DO....REEEESEARCH!!! :ahhh -
-
Just looked it up and now I'm a little more familiar with it. Very good viable option

I haven't considered any retired tools cuz they can't be repaired with warrantee. I actually haven't tried a retired-tool warrantee so what do you think will happen if the pliers snap and I send it in? -
@Kmarr said:
Just looked it up and now I'm a little more familiar with it. Very good viable option
I haven't considered any retired tools cuz they can't be repaired with warrantee. I actually haven't tried a retired-tool warrantee so what do you think will happen if the pliers snap and I send it in?your get an ST300
-
for real? so they don't take depreciation into account? I would think they'd give you a tool of less value so there's no fraud. ....some people like to ruin warrantees for the rest of the honest people
cough LM123cough :D -
After reading this and a few other forums over the months, I just had to fix your post,
@Kmarr said:
for real? so they don't take depreciation into account? I would think they'd give you a tool of less value so there's no fraud. ....some people like to ruin warrantees for the rest of the honest people
cough He who must not be namedcough :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login