What Did You Use Your Multitool For Today?
-
I used my LM c301 and Sideclip to install the batteries in my Sonic Screwdriver. There's something rather pleasing about that.
-
@Kmarr said:
Needless to say I am very impressed. The new plier head is simply a marvel of engineering and a BIG step up from the core/surge model. I am loving the removable wire cutters; On my new pre-owned wave there is a dent in the hardwire notch, this could easily be remedies if they were removable. I bought this thing pre-owned but the seller should just have listed it as LNIB cuz there is absolutely no wear, nor signs of use. Still very stiff and feels really solid. Also the tool load out is MUCH more diverse than the core! ::)Now for the on-the-fence parts. I am not too crazy about the clumping system. The blades are very hard to get out, I am sure this loosens with time so I won't fret. When closed the top seems to fan out and create sharp edges. When I tap it, the blade(I think) vibrates against the body and makes a small rattling noise- anyone else have this? I use a rescue tool sheath for my core and the new cut outs don't fare well when I put it in, as there is NO wiggle room with the core to begin with(I like it that way :) ). Cut outs- they make it very easy to reach the blades but the clumping system negates that ease... I also am not sure about my hands digging the blade with heavy squeezing...?
Last thing- People say the core wasn't built for heavy use but the ST300 is... If they mean plier head, definitely. Otherwise I hear "the handle steel is thicker." I did a side by side comparison with the Core and if there is a difference, its the size of a human hair, very thin human hair. And whatever thickness it seems to add, the cutouts probably take away. I personally prefer the Core handles myself.
Soryy for the long-winded comments, its not usually my style but Core vs Supertool 300 is a topic I have read much disagreement about
I've not got any rattling in either of mine Kmarr, can you be more specific about what you think might be loose and rattling? I express surprise at this, as the ST300 locking mechanism seems tighter than the Core's, and there's decent resistance from the backspring on both of mine. Not snap like a SAK, but something approaching it, and that should serve to stop any looseness or rattling I would have thought
As for the "selective clumping", you'll get used to it, but the trick basically is to pull out the file or the saw to lift the middle tools like the drivers, can opener, awl etc - I find that it works brilliantly.
Last thing- People say the core wasn't built for heavy use but the ST300 is...
I don't know who said that, but I certainly wouldn't. The Core was one of the toughest tools on the market, and in my experience could be abused all day without worry (so I did - often :D). The ST300 pliers are certainly heavier duty, but I would never suggest that the Core was a light duty tool - it's a beast! Much stronger than the Surge I reckon, with less flexing when you really torque the drivers of are cutting something big!
-
Used my Skeletool CX for show and tell at school, where I amazed my classmates- all of whom are 3-4 years younger than I am. :-\
-
Davek- The rattling isn't noticible unless I hold it and tap it with my finger, or pretty much anything. The core had the liner so This would never happen. The ST300 has the rounded edges with no buffer in the middle so the blade vibrates on the part of the handle that is curled over. It might be that my blade is a hair closer to the edge at the tip than the base. Prob just a QC thing, nothing I'm worried or angry over.
The tool clumping is a good idea if you have gloves on in the winter or you trim your nails. I'd say its a good idea cuz my first MT was a powerlock and I'm used to it :D
I investigated the differences in pliers of the ST300 and the Core. More flexing in the core and I think its in the pliers. The ST300's head is much thicker and resists the flexing. Another possible reason is that the ST300 plier "locking point" is much smaller and doesn't give much room for bending. However that would only effect it very slightly IMO.
-
tightened some door pulls with my Skeletool
-
Tried using the serrated Spirit blade to open some mail. Opened the top of my finger instead.
-
@thebullfrog said:
Tried using the serrated Spirit blade to open some mail. Opened the top of my finger instead.
-
@thebullfrog said:
Tried using the serrated Spirit blade to open some mail. Opened the top of my finger instead.I bet that's one knarly cut!
-
Yeah, it felt pretty awesome. Thankfully I hit at an angle so it didn't cut straight down. Probably would have it the knuckle bone if I had. Instead it went sorta across the top of the knuckle, didn't even bleed really, but went pretty deep. "just a flesh wound" indeed.
-
Used my Wave to build a new Ereader set up in all of our stores today and this week.

-
Yesterday actually, but who's counting: I stopped by my Mom's place and she and my step-dad were working on putting up a new picket fence to replace the old wire one. First use of the Spirit was she needed me to cut some of the old wire fence off of some sort of decoration/fence post made out of rebar welded together into a sunflower. At least I think that's what it was supposed to be.... Anywho! It was the first time I ever cut anything with the Spirit's wire cutter. Gotta say I was very impressed. It was some really thick burly stuff, and the Spirit went through it like it was a paperclip. Repeatedly. I was really surprised actually. A bit later on I had to remove a Phillips screw. It didn't slip :)
-
Handy supertool 300 pliers helped me fix some old music stands that needed it pretty bad!
-
I just finished taking down and dis-mantling an old TV antenna with my Swisstool X. I'm scared of heights, the roof had a steep pitch, and I was happy I didn't have to lug several tools up on the roof. I used the biggest screwdriver, the pliers, the wirecutters, and the metal saw.
-
Well last night Angie used the electric clippers to cut my hair, disaster as all it did was pull my hair our (and i dont have much more to lose ) :D so i got the ST300 and took the clippers apart and found they got twisted some how possibly dropped on the floor by someone ::) well used the Phillips and the pliers and all sorted

paul
-
Used the blade on the Charge Tti to poke a hole in a plastic bag... for a rather covert purpose. >:D
-
used the ST300 to put a birds house up outside, was up the ladder and had my drill and the ST300, had to use the ST to knock the rawplug in ,so thats 20 features not 19 ;)
paul
-
i hope it was a plastic rawlbolt

-
I used my Charge ALX with a custom bit to repair a keycard lock in a door at work. I do this regularly, and the charge excels. I used the charge's guthook to remove a tag from my new steel water bottle, and the file went to work on two of my (nice) spoons that met a terrible fate in my garbage disposal because the wife doesn't know how to look before she hits the darn switch.

-
used the ST300 to put a birds house up outside, was up the ladder and had my drill and the ST300, had to use the ST to knock the rawplug in ,so thats 20 features not 19 ;)
paul
Hehe - they never mention the "Brummie Screwdriver" do they?
:D no not officially dave
and yes ryan so not to many marks, just more character ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login