Sharpening SAKs
-
I avoid the bald patches by testing the blades on my thumbnail

-
Ya could try shaving your legs , that should really set the Old Lady off !
Chris
-
How do you strop? I know about leather belt, but then I heard about newspaper or reversing strokes on very fine stone.
-
I avoid the bald patches by testing the blades on my thumbnail

when your thumb falls off you know its sharp enough

I red about thumbnail test on web site about sharpening shaving blades. It must be a lost art since there are fewer barbers around. Still it makes me shiver just to thing of running sharp blade across my thumbnail since I did that few times unintentionally and ended up cutting almost all the way through the finger nail.
-
I test blades on my left thumb all the time , you get used to it . Do it in private , it tends to creep out onlookers .
Chris
-
Stropping is a bit of an artform . On a SAK , use very light pressure , too much and you will actually dull the blade .
The Knives Ship Free website has some good clips on the subject .
It's well worth mastering , it can turn a small blade like a classic into a pocket scalpel .
Chris
-
When I had long hair, before I joined the IDF, I used to split hairs to check if a blade was sharp, just take a hair that's still attached to my head and run the blade over it lightly.
Now I use my right thumb nail. -
Well my Sharpmaker (finally) arrived
(bloody ash cloud
); first thing to sharpen was my OHT, which i had removed the serrations from.15min later - HELL'S TEETH!!! from bluntish (thanks to the file) to shaving sharp (bald patch on arm :ahhh)
If anyone has read terry pratchett's 'reaperman', they will appreciate that Death could have done a better job on his scythe with the sharpmaker than sharpening with silk and sunlight!
Must. Find. More. Things. To. Sharpen!!!
-
The Sharpmaker is bloody marvelous allright...

-
I've about worn out my medium rods :-[ It has taken a few years and I do sharpen <u>a lot</u> of SAKs.
-
If you like the Sharpmaker , also get the Profiles , and the double stuff - very worthy tools ! I keep a profile in my work kit , helps keep my chisels usefull . I also have one in my daypack , I keep a doublestuff in my outdoor blade maintenance kit .
Chris
-
@Styerman said:
If you like the Sharpmaker , also get the Profiles , and the double stuff - very worthy tools ! I keep a profile in my work kit , helps keep my chisels usefull . I also have one in my daypack , I keep a doublestuff in my outdoor blade maintenance kit .Chris
You like the double stuff. You don't find it to small? I was thinking of picking one up.
-
Anyone spirit level the sharpmaker? I would imagine an un-level surface would alter the angle
just thinking out loud :D -
I find the Doublestuff perfect for sharpening folders and 3" fixed blades . It's no substitute for an 8" bench stone , but most of us don't schlep one of those in the field . I made a latigo slip for mine , the back of which I loaded with stropping compound . Fits in my kit without a ripple , and gives lots of sharpening power .
Chris
-
After getting questions at work about bald patches on my arms, I switched to the nail method. Works well.
-
I knew a couple of Knifemakers who shaved their lower legs .
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login