SuperJuice KFS4
-
What do you have against a saw, if I may ask?

Maybe its just me (and Gareth! :D) but I just don't see the point in puny little wood saws. :P I mean, in order to get a decent stroke on the saw, the diameter of the object being cut should be about half the length of the saw blade or less. And if its that small, why not just break it? ::)
I must confess that I've never ever not once felt it necessary to use the saw on my KF4 (but I've had numerous occasions when I wished it had a pair of scissors) Hence the swap on this mod. :)
The Juice saw works great on Blackberry canes.
Just sayin'
-
What do you have against a saw, if I may ask?

Maybe its just me (and Gareth! :D) but I just don't see the point in puny little wood saws. :P I mean, in order to get a decent stroke on the saw, the diameter of the object being cut should be about half the length of the saw blade or less. And if its that small, why not just break it? ::)
I must confess that I've never ever not once felt it necessary to use the saw on my KF4 (but I've had numerous occasions when I wished it had a pair of scissors) Hence the swap on this mod. :)
Ah ha, I see. Thanks for that.
I have no experience with a juice saw but I sure do with the saw on my wave and it seems pretty useful to me. But it does lock on the wave and it is a little more beefier on the wave I'm told.
Anyhow, do what you have to do and I'm looking forward to the end result

-
long wood saws are SOOO MUCH EASIER than stumpy ones. same with files. I must obtain a kf4 so there can be some backing to my convictions :D
-
Holy Mackerel Bob! You've opened a can 'o worms on this one. :ahhh
-
It's a good thing you're not a Brit Bob...you would have been obligated to start a Saw or Scissors Poll ::) :D
-
-
::) I guess we know who the big Poll-Ho is...

-
Wow Bob, I wish I was your neighbor.

-
-
We used to dream of a dremel and belt sander on a half broken IKEA table. ::)
-
@sparky415 said:
We used to dream of a dremel and belt sander on a half broken IKEA table. ::)All i have is a dremel :D although a very useful tool

-
bob its the weekend now

just sayying :)
-
Yeah.... I wanna see it

-
Bob this looks like it will be a truly useful yet beautiful tool

I really hope someone in Leatherman's R&D department takes a look at this :D I think the Juice range has so much potential especially for us poor UKites :-\
I almost cried a single tear when I saw that lovely purple XE6 in bits on the operating table :'( but I realise its sacrifice is for the betterment of Leathermankind; I salute you XE6

-
@cerbera147 said:
Bob this looks like it will be a truly useful yet beautiful tool

I really hope someone in Leatherman's R&D department takes a look at this :D I think the Juice range has so much potential especially for us poor UKites :-\
I almost cried a single tear when I saw that lovely purple XE6 in bits on the operating table :'( but I realise its sacrifice is for the betterment of Leathermankind; I salute you XE6

Nice

-
Made some definite progress today, but in the end it fell just short of the goal. :-\ And for such a silly reason too..... :P
The whole story:
I finished machining the backsides of the scales this morning, which went much easier than anticipated. :) Then came assembly time!
Yay, this ought to be fun, right? WRONG! :P After spending over an hour fighting The Battle Of The Backsprings, it was back to the shop to make a little assembly jig. Then things were proceeding nicely again, until it became apparent that my pivot screws are too short. :'( The ones I bought from www.knifekits.com are one half inch long:
Unfortunately, it appears they need to be just a little bit longer. :( These are already the longest ones knifekits sells, so I'll have to make my own. :(
In the mean time though, I was able to assemble up the first layer and the pliers layer, just to get a feel for it. Here's a few pics. (keep in mind there are no back scales in place yet)


Showing cap screw being used as thumb stud

Pliers deployed

Screwdrivers

Special blade load out for Mike LOTS :D


-
:o That is gonna be so awesome when you get finished
But I would have took out the serrated blade and left in the saw ::) Yeah I agree with Mike on something :D ;) Still it is gonna be so cool to see the finished product Bob 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

