Small(ish) MT with external blade
-
FWIW the Spirit is the most "compact" of the mid/full-sized tools I've owned thus far (including the Pulse), although a bit heavier as the tool density is quite high. Modding it is very difficult, unless you find replacement pivots (in which case, drop us all a line :D). BTW what mods would you have in mind?
-
@Nikos said:
FWIW the Spirit is the most "compact" of the mid/full-sized tools I've owned thus far (including the Pulse), although a bit heavier as the tool density is quite high. Modding it is very difficult, unless you find replacement pivots (in which case, drop us all a line :D). BTW what mods would you have in mind?Comparing the Spirit with the father-in-law to it, the Bear & Son Bear Jaw/Crescent ToolZall Pro, the ToolZall Pro is actually probably half an inch shorter than the Spirit, though is almost the same thickness.
-
Heh. My envisioned mod is a little different -- I want to put two keys and an oil vial (for religious purposes) into an EDC took/knife. This would eliminate the need for a keychain.
If I think I might be able to do that with a Victorinox Spartan/Tinker if I remove all the tools but the two blades. (I'd put an oil vial in place of the corkscrew/phillips, a key in place of the awl, and another key in place of the can opener/bottle openers.
And, of course, I'm looking into doing it with a MT.
(Actually, if I could get rid of my keychain, I might be able to carry my key tool and a MT. To slim down or to increase the tools I carry. Hmmm.....
I'm thinking that right now my best course of action might be to not worry too much about the mod being "ideal", and go with something simpler. I think I'll take apart my PST II and my micra and see what I can do with them. D
-
I`d suggest putting the oil vial in your wallet. If you dont want to put it in your coins pocket, add an elastic strap to the wallet to hold the oil vial.
That way, you wont have to mod the vial into an MT which might not only be quite difficult but also takes up a lot of space in an MT.The keys are a good idea thought and should be doable. jus get a tool with wide enough blades to fit the keys. Depending on the key size my first idea would be a SOG tool for that purpose.
Perhaps you should have a thought on which tools you really want the MT to have - everything which isnt used is unneccessary bulk. If you know what tools you want, post the list over here so we can have a thought about it.
Here is the list i read out of your posts:
as small and light as possible
(?) PST sized handles
PST sized pliers
OHO big (2,5') blade
small blade
two keys
(?) no awl, no corkscrew,no phillips, now openersoil vial (perhaps in the wallet)
-
What about my favourite Skeletool :ahhh
I can't see how big the vial is but it looks like it will fit in the carabiner
area to me
-
I do love my skeletool too but he might find the pliers to be a bit to small.
-
I`d suggest putting the oil vial in your wallet.
:o
tries to figure out how to fit one of those in a wallet
fails
-
I`d suggest putting the oil vial in your wallet.
:o
tries to figure out how to fit one of those in a wallet
fails
laughs at porteiro as he curses his tiny wallet
Yea, most wallets aren't good for holding anything thicker than an LM but card. I liked your tinker idea! I love modding SAK's, and the two layer saks are the easiest to put back together. I would really, really like to see that mod if you do it. The micra idea sounds good as well, there are a couple micra sized cheapo cabella's MT's that have a light in them about the same size as your vial and it works just fine.
-
When I was first looking into different MTs that I could drop my 2-key keychain into, I was trying to figure out where I'd put my oil vial when I found a picture of some knockoff MT that had an LED flashlight that at first I mistook for an oil vial.
The great thing about replacing the corkscrew instead of cramming it into a MT is that it won't have to be quite as slim -- the vial can be a little wider and come out past the surface of the scales.
-
SURGE

-
oohps sorry :D
juice xe6 
-
I think the Gerber Octane meets those requirement. But you might have a hard time fitting full length keys in it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login