Why Lanyard?
-
Thanks

-
when my paracord arrives ill be making a lanyard for my charge/ sideclip wouldn't wont that to drop 7 stories in a lift shaft
-
Because they look cool


-
Well, your's do James :D
-
i was about to say that :P nice knife
-
I don't mind a lanyard on some things, and I can make some really nice ones, but it never occurred to me to put one on everything with a bail.
-
I never use lanyard on full size SAK so I ground it off my EDC climber. Plus I have short nails and it get in the way of opening back tools.
-
Well, if we're being technical (Ok, I'm being technical) I used a lanyard on my SAK's or other knives if I'm outside, or around water. Lanyard around the wrist keeps knife right there.
I use fobs and such for my SAK's to attach them to a carabiner or s-biner and then hand in my pocket or pocket of a bag or something like that. On the smaller SAK's, I used them for easier identification to pull it out of my pocket. LOL!
Personally, I like the little key ring on SAK's just because it's a part of what makes them SAK's. I wouldn't put a 91mm or bigger SAK on my key chain, but I do frequently throw on a fob or a carabiner just to keep track of it. If you use an s-biner, you can leave it hooked on the one end then just slide the SAK of the other. Works well for me. -
Two words , water and Gravity . In a nutshell , why I like lanyards !
Chris
-
I always use one on my MY's as a way of attach them to my belt loop as i keep them loose in my back pocket,

and not that im paranoid of losing them but even in my bags ::) :D

-
I personally only use lanyards to make a small item bigger(like a vic classic that gets tossed in a pocket), make them easier to extract from pockets/pouches/sheaths, and to attach them to myself if I am working anywhere high up or wet. They can make your tool less use-able like you said, but that is what the Mcgizmo clip is for! Head on over to JSBurly's on EDCforums and you will find the Mcgizmo clip. It makes your lanyard a quick release instead of a permanent fixture to your tool or knife.
-
Re: Why Lanyard?
Because it gives us another hobby, making stuff with paracord :D
-
I actually do keep a 91mm SAK on my keyring a lot of the time. I use the whole knife like a keyfob, and often just stick the knife in my pocket and let the keys hang out the side. It's also on a quick release if I need it independently. It's a little bulky at times, so depending on the pants I sometimes swap it for a Micra. But if I didn't have it on the keyring, I wouldn't carry it at all as I feel the average SAK is too slippery to just toss in a pocket.
I keep a small loop lanyard on my little bitty AA flashlight all the time. It makes it easier to retrieve from a pocket, makes it easier to find if I drop it, and when it's looped around my wrist it's a lot more secure to carry and use. I keep a neck lanyard with a clip in my big bag of stuff for when I'm going to be in an environment where dropping my MT or knife would be a very bad thing (water, ladders, in the woods, on the roof, whatever.)
-
I like lanyards on small items so they are less likely to fall out of my pocket and are easier to grab hold of. Lanyards on MT's though are a PITA IMO so I don't put them on those.
-
@Benner said:
I like lanyards on small items so they are less likely to fall out of my pocket and are easier to grab hold of. Lanyards on MT's though are a PITA IMO so I don't put them on those.Yea, I noticed that most LM's have the lanyard ring at the tool end of the, erm, tool, meaning that when you have a screwdriver deployed the lanyard is hanging off the same end. Unless you hold the lanyard against the tool, it gets in the way. I really never understood why they designed the newer tools like that when the PST had it on the "correct" end.
I think the Swisstools have the lanyard hole near the pliers as well.
-
I like lanyards on small items so they are less likely to fall out of my pocket and are easier to grab hold of. Lanyards on MT's though are a PITA IMO so I don't put them on those.
Yea, I noticed that most LM's have the lanyard ring at the tool end of the, erm, tool, meaning that when you have a screwdriver deployed the lanyard is hanging off the same end. Unless you hold the lanyard against the tool, it gets in the way. I really never understood why they designed the newer tools like that when the PST had it on the "correct" end.
I think the Swisstools have the lanyard hole near the pliers as well.
I guess the logic with the lanyard rind included with the tools is that you can fold it away and forget about it if you don't want to use it. I agree that its a PITA if you actually try to use it though. The Crunch is the worst. Bears are worse than Leatherman!
The best lanyard ring solution by far has to be the detachable option on the Wave, Charge and Surge. You can have it all ways with that solution :)
-
i never used it so its been passed on, im not sure id trust it too much either :S more keen on the fixed one on the charge and wave
-
@ryan1835 said:
i never used it so its been passed on, im not sure id trust it too much either :S more keen on the fixed one on the charge and waveI used to be a bit mistrustful of it, but it's tougher than you might expect. Put another way, it takes a fair bit of pull to detach it, and if I had that much strain pulling on it, that might be the best option as opposed to following it!!!!
-
The lanyard ring on the tools side of the handles was probably supposed to be used with a lanyard with a clip, not a fixed one. That said, I still believe the lanyard attachment should be on the pliers side of the tool; hang a well-used MT by the end of one of its handles and just wait till gravity opens it up... :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login