The most unbreakable multitool.
-
My ST300 is shaping up to be quite sturdy. I just dropped it hard and there is not a single scratch on it.
i used mine while up a ladder the other week to knock in some rawplugs, i wouldnt knock nails in with it but i bet it could do it ::) :D
I bet it could, and it could do it well. I don't think LM would warranty that though, but you never know!
-
I can tell you which one is NOT the most unbreakable.
/topic/18005I feel that the powerlocks have the tightest grip of all multis and thats due to the compound leverage gears, but of the major multi tool makers i think its got the weakest frame. As you can see from the above link, i easily broke a powerassist while applying a lesser grip than i have on my small swisstool spirit. I also bent a regular powerlock to the point where the handles are completely parralled to one another when opened. In my opinion the swissgrip does have the strongest plier head but it not worth a damn for cutting anything thicker than a clothes hanger. I almost broke my wrist trying to cut a thin nail with a swissgrip, i think the design was poorly done.
My first choice for the strongest, usable plier based multi is the swisstool, even when twisting something you see very little twist on the plier head, where as with my surge, after minimal twisting of a metal plate, the tips of the pliers ended up not being even.
Gerbers are in the bottom, when it comes to plier strength, (of the major multi brands).
Just my opinion, but like others have mentioned, multis are not meant to be used as hard a an individually specialized tool is but it shouldn't brake with minimal use either. -
I broke the plier tip on my original super tool, but I was abusing the hell out of it. Got the needle nose into a prying situation (sideways) and it snapped, after a few gorilla tugs. This was trying to open a jammed lockbox.
-
@nelly1974 said:
Gerbers are in the bottom, when it comes to plier strength, (of the major multi brands).Thats BS . I won't say every Gerber plier head style is the best. But I will put my Bluntnosed 600 up against any MT. Its been used and abused for 10 years and still going strong.
-
SWISSTOOL! - its really hard to break it,not just pliers but tools itself.I put 247 lb to handles to cut screws,(using my foot),same with Surge...............-I broke Surge handles :( but not Swisstool :) Amazing tool!
-
@CumminsDiesel said:
SWISSTOOL! - its really hard to break it,not just pliers but tools itself.I put 247 lb to handles to cut screws,(using my foot),same with Surge...............-I broke Surge handles :( but not Swisstool :) Amazing tool!If you need to step on the tool to cut something maybe you should use a saw instead..

-
I was just wonder before,why Tim Leatherman ,using same way,cutting nails,like me not broke his Charge (see pictures).Now I know,the secret is - stand,to support Charge.When you install multitool and use your foot to cut nail,the top handle just stop on top stand support,so you can't break handles.BUT!In my way I'm not using any supports,just vice-grip.Using same way to cut screws/nails like Tim Leatherman WITHOUT SPECIAL SUPPORT I BROKE SURGE HANDLE,.............BUT NOT SWISSTOOL :)


-
And this is what I do to cut my screws/nails using vice-grip and step on the handle,NO ANY SUPPORTS between handles!
-
SWISSTOOL! - its really hard to break it,not just pliers but tools itself.I put 247 lb to handles to cut screws,(using my foot),same with Surge...............-I broke Surge handles :( but not Swisstool :) Amazing tool!
If you need to step on the tool to cut something maybe you should use a saw instead..

oh boy.... :-\
............... :D Its a test,just a test,how tough is multitools ;) :),thats it,and of course I know about saw,I know..... :)........I know 
-
How many threads do you intend to repeat this BS on?
It's becoming very tedious. You must have posted it on about 6 threads by now ::)
-
@DaveK said:
How many threads do you intend to repeat this BS on?It's becoming very tedious. You must have posted it on about 6 threads by now ::)
You can't stop me :D,just kidding.No more :-X
-
why do you need to cut screws?
-
Gerbers are in the bottom, when it comes to plier strength, (of the major multi brands).
<u>Thats BS</u> . I won't say every Gerber plier head style is the best. But I will put my Bluntnosed 600 up against any MT. Its been used and abused for 10 years and still going strong.
Seems I have acquired the wrath of a loyal Gerberite disciple. :D
-
The most unbreakable tools I have are Fat Max:

And the Ugly Tool:

That sounds like an 80's cop show. Move over Cagney & Lacey, step aside Scarecrow & Missus King, out of the way Jake & the Fat Man, HERE COMES FAT MAX & THE UGLY TOOL! :D
Def
-
I will agree the blunt nose gerbers are stout! My needle nose mp 6oo arent to bad either.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login